介绍了高精度片式NTC元件测量分选的关键技术；
The key techniques of high precision measuring and classifying about SMT NTC is analyzed.
描述了涡电流分选装置的结构以及涡电流分选的应用领域。
The configuration and application fields of eddy current separator were described.
介绍了涡电流分选的物理原理，分析了导体所受的成分力。
The physical theories of eddy current separation were introduced, and the conductor forces which were caused by eddy current separation were analyzed.
根据流程、设备的改进，给出一个提前分选的流程及试验结果。
According to flowsheet adopted and equipment improved, a pre-dressing flowsheet together with its test results are introduced.
电选是利用矿物的导电性质不同而进行分选的一种物理选矿方法。
The electrical sorting method USES the differences of conductive of different mineral.
介绍采用基于免疫进化算法的神经网络对雷达信号分选的实现方法。
The paper realizes the sorting of radar signal by the ANN based on immune evolutionary algorithms.
本文对影响干式强磁分选的主要因素磁场强度和极距进行了试验研究。
Main factors of magnetic intensity and polar distance influencing the dry high magnetic separation were studied in this paper.
在跳汰生产工艺中，煤炭是在由煤泥和水组成的悬浮液中进行分选的。
In coal jigging washing process, coal is washed in suspension composed of coal slime and water.
论述了利用单片机取代工控PC机进行石英晶体频率检测分选的技术。
Discussed a technology to measure quartz crystal frequency using SCM 8051 instead of traditional ways of using PC.
在深入分析ICA算法的基础上，提出了将其用于雷达信号分选的新思路。
After analyzing ICA algorithm, a new method of the radar signal sorting based on independent component analysis is proposed.
介绍了利用改进型的时间相关算法进行短波非正交跳频网台信号分选的方法。
Shortwave non-orthodox frequency-hopped signal selection by improved time correlation arithmetic is introduced.
阐述我国铁矿山磁铁矿和赤铁矿分选的单一磁选流程和联合流程的结构及特点。
The structure and characteristics of the sole magnetic separation flowsheets and combined flowsheets for the separation of magnetite ore and hematite ore in China's iron mines are expounded.
结论CD34+细胞分选的自身干细胞移植治疗儿童难治型红斑狼疮近期疗效满意。
Conclusion The effect of CD34 + autologous prepheral progenitor cell transplantation on children with refractory SLE was satisfied in short term.
这种分选的作用主要表现在使得大块物质落入破碎仓而小块物质通过输送装置进入研磨仓。
The sorting function mainly displays in making large material into broken storehouse and small pieces of material by transmission device into grinding storehouse.
本文介绍一种利用微机进行材质检测、分选的原理和方法，较传统方法方便、简单、准确。
The principle and method for testing and selecting metals by composition and hardness with microcomputer are described. The method is simple and accurate.
介绍了目前微细粒矿物分选的主要工艺及主要设备，为今后微细粒矿物的分选研究提供参考。
The main technologies and equipments for fine-particle mineral processing are presented in this paper. This will provide a reference for their research in the future.
本文主要研究了一种集晶片频率测量、分选于一体的新型石英晶片测量与分选的自动控制系统。
This paper studies a kind of new autocontrol system across-the-board, which can realize both the measurement of frequency and the separation of quartz crystal wafer.
由于各种物料电性质的不同，受力状态的不同使物料落下时的轨迹不同，从而达到分选的目的。
The difference properties of materials and the difference forced state result in variance of trajectory, thereby achieve the objective of separation.
针对某难分选的铜锌矿石，提出一种混合浮选—氧化焙烧—选择性浸出—铜、锌电积选冶联合新工艺。
For a certain refractory Cu-Zn ore, a new process of bulk flotation-oxidizing roasting-selective leaching-Cu-Zn electrowinning is proposed.
提出一种跳频电台通过抑制跳频频率点、破坏干扰站网台分选的方法，从而达到对抗跳频跟踪式干扰的目的。
A method of controlled frequency points is put forward, which can destroy FH signal sorting. So the running-after-sport jamming will not be effective.
在对LF M信号实现分选的基础上，选取待识信号的瞬时频率作为识别特征，利用最近邻方法对信号进行识别。
Supposing the LFM signals had been sorted and selecting the instantaneous frequency as identification character, the closest method is used to distinguish the signals.
根据涡电流分选的原理，采用钕铁硼系磁体，研制出CRIMM型稀土永磁辊式涡电流分选机，对其结构及使用领域进行了描述。
The paper describes the principle of the separator, and the structure and applications of CRIMM permanent magnetic re eddy current separator.
研究了上升初期脉动水流的速度和加速度特性及其对分选的影响，为研究不同风水操作制度对床层松散状况的影响提供了理论依据。
The character of velocity and acceleration of pulsated-water during the upward period and their influence on the jigging separation has been studied.
利用气流分选的方法对粉碎后的废弃印刷线路板中的金属与非金属进行了研究，粉碎后的颗粒在气流作用下按照密度与粒度进行分选。
The metal and non-metal of comminuted printed circuit board scrap was studied by the method of pneumatic separation, comminuted material were separated according to density and size by wind power.
能满足喷油嘴偶件生产厂家对喷油嘴偶件针阀、针阀体自动分选精度，速度的要求以及对成本投入的要求，改变手工分选的落后局面。
All these characteristic can satisfy the demand of the factory. By using this system can change the laggard situation of the manual separation of injector valve and orifice.
该系统充分发挥了S3C44B0嵌入式微处理器高性能优势，经调试证明，能够可靠地实现对半导体分立器件的参数测试和分选的功能。
The semiconductor testing system makes full use of the high-powered ARM microprocessor S3C44B0. It is testified that the system can meet the requirement of function.
磁滤器是一种用于弱磁性粉体矿物分选的小型磁选机，其磁系是磁滤器的关键部件，针对国内外磁系磁路设计中的问题，研制了一种磁路独特的永磁磁滤器。
On account of the problems of magnetic circuit design of magnet assembly at home and abroad, a permanent magnetic filter with a unique magnetic circuit was developed.
磁滤器是一种用于弱磁性粉体矿物分选的小型磁选机，其磁系是磁滤器的关键部件，针对国内外磁系磁路设计中的问题，研制了一种磁路独特的永磁磁滤器。
On account of the problems of magnetic circuit design of magnet assembly at home and abroad, a permanent magnetic filter with a unique magnetic circuit was developed.
应用推荐