所述的凸台由圆柱体和圆锥体两部分组成。
长方形凸台固定外壳和底板外壳不至于移位。
The rectangle bosses can fix the controller shell and the shell of the bottom plate to prevent displacement.
它包括钢套本体，定位端设有的两个扇形定位凸台；
The steel sleeve comprises a steel sleeve body and two sector positioning convex plates arranged at positioning ends.
钎料凸台和互连焊点的重熔是面阵封装的关键技术之一。
The manufacture of solder bump is one of the key technologies for area array packaging (AAP).
大模数高凸台圆柱直齿轮是汽车工业上有特殊意义的零件。
The spur gears with big modulus and high boss are critical parts in the automobile industry.
对带凸台的大型饼类锻件，可采用漏盘镦挤工艺进行生产。
For a heavy forging with bulge, the upsetting-extruding process can be adopted.
论述了焊接凸台衬圈的优点、改装工艺及在产品上的应用。
The advantages of this backing, the concept designed for it, welding procedure and successful use in production are introduced in the paper.
脚蹲凸台可为平台，或者前端部是一斜坡、后端部为平台；
The foot lug bosses can be platforms or the front end parts of the foot lug bosses are slopes and the back end parts are platforms;
底部凸台盖板进线，盖板可预先拆下开孔，并配有密封圈。
Cable inlet for bottom elevated cover plate: the cover plate can be dismounted to drill holes and the seal rings are provided.
本实用新型采用布满蜂窝状凹坑或凸台底面结构的受热容器；
The utility model provides a honey comb like bottom for heating vessels, which adopts a heating vessel with a bottom structure which overspreads honey comb like pits or lug bosses.
顶板支护用补强钢带，涉及有锚杆眼孔、钢带体和凸台组成。
A reinforcing iron strip for roof plate supporting relates to an assembly which comprises an anchor shaft eyelet, an iron strip body and projection clubs.
该凸台是设置在该螺头与该螺杆之间，其外周缘设有若干纵槽。
The lug boss is arranged between the screw head and the screw rod, and the external circumference of the lug boss is provided with a plurality of longitudinal grooves.
右支撑杆上开有至少一个孔和至少一个大小与挂杆孔相适应的凸台；
The right supporting rod is provided with at least one hole and at least one dummy club, the size of which adapts to the rod hanging holes.
左支撑杆上开有至少一个孔和至少一个大小与挂杆孔相适应的凸台；
The left supporting rod is provided with at least one hole and at least one dummy club, the size of which adapts to the rod hanging holes.
试验表明，使用中心带凸台的缩口型燃烧室后柴油机的性能有所改善。
The test shows that the diesel engine performance can get some improvement when the latter combustion chamber is used.
锁止套周侧设置半圆凸台，半圆凸台与设置在壳体上的半圆凹槽相配置。
The side of the lock-up set is provided with a semicircle lug boss, which is allocated with the semicircle groove arranged on the shell.
基于数值模拟的方法，分析了凸台轴的自由冷镦和开式冷镦两种加工方法。
Base on the method of numerical simulation, both free cold forging and opened cold forging of shaft with boss were analyzed.
筋板、凸台部分或薄壁处为防止冷隔，要提高铝液流动性。模温应相对提高。
The number of stiffened plate, convex platform part or to prevent cold-lap thin-walled place, must improve liquid aluminum liquidity. Mould temperature should be relative improve.
为提高液化石油气钢瓶破裂时的容积变形率，研制了带有凸台结构的焊接衬圈。
In order to increase the volume deformation rate as LPG bottle broken, a boss-backing has been developed for welding the bottles.
所述极柱的凸台与电池盖之间设置有防腐蚀硅橡胶材料制成的“O”字型弹性垫。
An O-shaped elastic pad made of anti-corrosion silicon rubber materials is arranged between the lug boss of the pole and the battery cover.
底板前缘的凸台既加强了底板的强度，且在送纸时不会产生卡滞现象，使用可靠。
The convex platform at the front edge of the base-plate not only enhances the strength of the base-plate, but avoids clamping stagnation in the process of feeding paper, which is reliable.
初次模拟显示，在阶梯轴的凸台处与其临近连接的阶梯轴段会产生缩孔、缩松缺陷。
The initial simulation indicated that the shrinkage defects formed at the boss sections and the section near the connection of multi-diameter shaft.
设计一套特殊测厚规测量两个环形凸台的距离，这两个环形凸台位于两个同心孔内。
The article designs a special dial thickness gauges that measures the distance between ring-steps in two concentric bores.
以凸台型热节为对象，采用ANSYS软件对铸造过程中由于型芯形成的热节进行分析。
Analysis of hot spot resulting from core during casting process was conducted by ANSYS software aiming at the boss hot spot.
从而，当需要改变冲击吸收板的结构的时候，可移动的凸台可根据需要设置在底 座板上。
Thus, when it is required to change the structure of the impact absorption plate, the removable bosses may be rearranged on the base plate as desired.
减小压盘凸耳和制动器壳体凸台间的周向间隙可减小制动时的冲击，有效地改善制动平顺性。
Reducing the circumferential gap between the platen protuberant and the brake shell protuberant can reduce braking impulse and improve the comfort effectively.
发动机机匣上安装凸台结构，可简化为机匣壳体开孔后用围壁和加强板组合补强的力学模型。
On engine cases, installation base can be simplified by a mechanics model, which is case shell with hole and a complex of enclosing wall and reinforcing plate for increase strength.
该算法只需要三次等距即可计算出凸台和凹槽加工刀轨，并且能够处理包含自由曲线的轮廓。
A new tool path generation algorithm was presented to eliminate interferences, when nesting convex mold and concave die were machined with tool paths calculated by offsetting the 2D profile directly.
该算法只需要三次等距即可计算出凸台和凹槽加工刀轨，并且能够处理包含自由曲线的轮廓。
A new tool path generation algorithm was presented to eliminate interferences, when nesting convex mold and concave die were machined with tool paths calculated by offsetting the 2D profile directly.
应用推荐