试验结果表明,该钢具有优异的焊接性能、较低的焊接冷裂纹敏感性和良好的耐大气腐蚀性能。
The results show that the steel has superior weldability, low cold-cracking sensitivity and good weather corrosion resistance.
采用真空控时急冷技术对H13钢热作模具进行淬火,可使之得到细小的马氏体组织,从而显著提高热作模具的冲击韧度。
Hot working dies of H13 steel vacuum quenched by the use of the time-controlled sudden cooling technology will obtain fine martensite.
宝钢车轮用热轧酸洗钢带是采用控轧控冷工艺生产的具有优良冷成形性能和焊接性能的低碳微合金化钢。
Hot-rolled pickled steel for automotive wheel is low carbon micro-alloyed steel with excellent properties of cold forming and welding produced by using advanced TMCP technology.
通过理化检测,对铆螺钢在冷镦时出现开裂的原因进行了分析。
These inclusions resulted in cracking of the cold forging steel during the cold heading process.
专业从事生产各种牌号的冷拔不锈钢无缝钢管,全线采用具有国内先进水平的工艺加工。
Professional engaged in the production of various grades of cold-drawn stainless steel seamless steel tubes, all used with the domestic advanced level of processing.
压榨后,葡萄汁在华氏60度左右的冷温下于不锈钢桶里进行长达十二天的发酵。
After crushing, the must was fermented for up to twelve days at cool temperatures, around 60 degrees Fahrenheit, in stainless steel tank.
本文针对空冷支架结构体系中典型的空间钢桁架节点进行了抗震性能试验研究。
In this paper, the seismic behavior of a typical joint in the air-cooled condenser structure system is researched.
通过测量硬度和观察组织,确定了几种冷变形钢的再结晶温度及其影响因素。
The recrystallization temperature of cold deformed steels and its influencing factors have been studied by measuring hardness values and structure observation.
本文研究了热镀锌及镀后冷拔对高强度双相钢钢丝力学性能的影响。
The influences of liquated zincing and cold-drawing on the mechanical properties of high strength dual phase steel wires have been investigated.
通过分析半钢冷锭加热裂纹产生原因,以及对半钢冷锭加热速度进行理论计算,制订了切实可行的加热工艺曲线。
Analyzing the reasons of semi-steel cold ingots crack occurred in heating and theoretically calculating heating speeds of semi-steel cold ingots, a practical curve of heating process is worked out.
冷镦钢盘条一般为低、中碳优质碳素结构钢和优质合金结构钢,用来冷镦成型制造各种机械标准件和紧固件。
The cold heading steel coil generally is low and medium carbon quality steel and alloy structure steel to manufacture various standard mechanical element and fastener by cold heading forming.
介绍了空冷贝氏体钢的优点、分类及应用,展示了空冷贝氏体钢广阔的应用前景。
The advantages, classification and application of air- cooling bainite steel are introduced. A wide applied perspective of air- cooling bainite steel is showed.
针对45钢冷拔厚壁管存在内表面横裂纹问题,分析了其产生的原因。
The causes of inner transversal crack of cold-draw heavy wall pipe of 45 steel were analyzed.
冷镦钢是一种在室温条件下,利用金属塑性成型工艺,生产互换性较高的标准件用钢。
Cold forge steel is a kind of special use of steel which can be used to produce the standard part in the room temperature.
通过对低碳低硅高铝冷镦钢成分的优化设计和控制,大大提高了冷镦钢盘条的冷镦性能。
The cold heading property of cold heading steel rod bundle is improved by the optimum design and control of chemical compositions of low carbon low silicon high aluminium cold heading steel.
工作冷槽:不锈钢冷槽,双层真空玻璃观察窗。
Of working cold trough: stainless steel cold trough, the double-layer vacuum glass observation window.
研究了不同冷却速度对SCM 435冷镦钢盘条组织性能的影响。
The influence of various cooling speed on structure and property of wire bar of SCM435 cold heading steel is researched.
用此工艺参数修复船用不锈钢油冷套,加之合理的喷涂工序与材料匹配,达到良好的修复效果。
A good repairing result was obtained by combining reasonable spraying process and material matching with this parameter in repairing oil cooling set of stainless steel.
亚稳奥氏体不锈钢冷变形后产生形变诱发马氏体,影响其物理和化学性能。
The deformation induced martensite in metastable austenite stainless steels effect their physical and chemical properties.
亚稳奥氏体不锈钢冷变形后产生形变诱发马氏体,影响其物理和化学性能。
The deformation induced martensite in metastable austenite stainless steels affects their physical and chemical properties.
通过对铆螺钢的成分与组织检验,对铆螺钢在冷镦时出现开裂现象的原因进行了分析。
The reason of cracking phenomenon occurring of the cold forging steel was analyzed by the composition and microstructure tests.
简述了冷镦和冷挤压用钢国家标准的修订内容。
Describe the content modification of national standard for cold heading and cold extruding.
本文主要介绍了空冷贝氏体钢在重型汽车前轴上的应用研究,探讨了影响强度与韧度的一些因素。
The article mainly introduces the application of air - cooling bainite steel at heavy truck front axes and discusses some factors affecting strength and toughness.
本文用电镜观察、拉伸试验、硬度试验、差热分析等方法研究了45钢冷形变后的预多边化处理对随后的回复、再结品过程的影响。
Studies the effect of the pre-polygonization heat-treatment on the recovery and recrystallization of cold-deformed steel 45 by TEM, tensile test, hardness test and thermal analysis.
本文给出了冷成型不锈钢方钢管和矩形钢管在腹板屈曲时的设计公式。
Design equations of cold-formed stainless steel square and rectangular hollow sections subjected to web crippling are proposed in this paper.
采用七种高纤维素型立向下电焊条,通过斜y坡口裂纹实验,对高强管线钢的冷裂敏感性进行实验研究。
The cold cracking sensibility of high tensile pipeline-steel was studied by Ygroove cracking test using seven kinds of high cellulose electrode of vertical down position welding.
结果表明,TCS钢具有良好的抗冷裂敏感性和抗结晶热裂敏感性能。
The results showed that TCS steel had good cold cracking resistance and crystal hot cracking resistance.
试验表明:该钢空冷条件下即可获得准贝氏体、板条马氏体及孪晶马氏体的复合组织,且具有较好的强韧性配合。
The results indicated that the steel is composed of quasi bainite, lath martensite and twin martensite under air cooling condition, and also has better combination of strength and toughness.
模拟钢轨焊接及焊后热处理工况,采用热膨胀方法分别测定uic 900a及u75 V钢轨钢的连续冷转变曲线(CCT曲线)。
By simulating welding and simulating heat treatment after welding, CCT Curves of UIC900A and U75V rail steels are determined by the expansion method.
结果表明:采用HTG - 1焊条可以有效地降低该钢焊接冷裂纹敏感性;预热温度增加,抗冷裂效果更好。
The results show that using HTG-1 electrode may effectively decrease welding cold crack sensitivity of the steel, and the sensitivity to cold crack decreases as preheating temperature increases.
应用推荐