熔覆层具有较好的拉伸、冲击强度和较好的韧性；
The cladding layers have good tensile, impact strength, and good ductility.
并对复合材料的冲击强度、阻燃性能进行了测试。
The impact strength and the flame retardancy of the composites were tested.
增韧树脂比未增韧树脂得到的增强塑料冲击强度要高。
The impact strength of reinforced plastics by toughened resin is higher than byuntoughened resin.
这种加强的负作用通常是抗冲击强度降低及磨损性增加。
The negative effect of this reinforcement is usually a decrease in impact strength and an increase in abrasiveness.
但抗弯曲强度和冲击强度及较高的延性，与金属不相上下。
But the ductility of flexural strength and impact strength and higher, and the metal be roughly the same.
研究了共混体的相结构、冲击断裂机理和冲击强度之间的关系。
The relationship between the phase structure, the impact fracture mechanism and the impact strength of the blends was investigated.
与市面上的井盖不同的是，它是用液压机压出来的，抗冲击强度较大。
Unlike the market covers is that it is pressed out by hydraulic machine, high impact strength.
结果表明，对共混体系缺口冲击强度影响较大的为体系中PC的含量。
The results showed that the using amount of PC had a great effect on the notched impact strength.
分别讨论改变脉冲力的冲击强度和冲击波形时对系统减振效果的影响。
The affect of system shock absorber are also part-discussed by changing impact strength of pulse force and impact waveform.
最重要的是，前后不一致的冲击强度从一批批的机会增加了部分破损。？
On top of that, inconsistencies in impact strength from batch to batch increased the chances of having part breakages . ?
PC板材最显著的优势是透光率高，耐冲击强度高等成为建材市场宠儿。
PC board is the most significant advantage is the high light transmittance, resistance to impact strength higher makes building materials market favorite.
随着施加在煤样上的载荷增加，钻孔冲击次数显著增多，冲击强度增大。
Along with the load increasing that ACTS on the coal sample, the burst frequency obviously rise and the burst intension also rise.
其冲击强度是聚氯乙烯的20倍，尼龙66的10倍，聚四氟乙烯的8倍。
Its impact strength is 20 times that of polyvinyl chloride, nylon 10, 66 times, 8 times of ptfe.
研究结果表明，复合材料的冲击强度、拉伸强度随玻纤用量的增加而提高。
The result showed the impact strength and tensile strength of the composite increased with the increase of the content of the glass fiber.
结果表明，随着碳纤维布含量的增加，复合材料的拉伸强度、冲击强度提高；
The results show that the tensile strength and impact strength of the composite increase with the increase of carbon fiber cloth content.
研究了温度对聚氯乙烯PVC缺口冲击强度、断口形貌特征及断面粗糙度的影响。
The effects of testing temperature on notch impact strength, fractographic features and fracture surface roughness of PVC have been studied.
结论牙托粉的分子量和分子量分布对义齿基托的挠曲强度和冲击强度有较大影响。
Conclusion the molecular weight and the distribution of molecular weight of denture base powder obviously affect flexure strength and impact strength of denture base.
结果表明，桐油改性酚醛树脂的剪切强度、冲击强度较未改性树脂大，硬度适中。
The results showed that the shear strength and impact strength were superior to those of pure resin, and the hardness was mezzo.
板材的玻璃化温度、拉伸强度、冲击强度和溶液黏度均随摩尔质量的增大而增大。
The glass transition temperature (T_g), tensile and impact strengths, and the solution viscosity of the PMMA plate increased with the increase of M_w.
结果表明：不同粒径的竹粉对复合材料拉伸性能、弯曲性能及冲击强度均有显著的影响。
Results showed that different particle sizes of bamboo flour had obvious effect on the tensile strength, flexural strength and impact strength of the samples.
结果发现，共混方式对共混体系拉伸强度影响不大，但对冲击强度和断面形态影响较大。
The results showed different blending methods had little effects on tensile strength of the blends, but obvious effects on notched impact strength and morphology.
载荷和抗冲击强度试验，发现这种井盖的载荷力为24吨，抗冲击强度也超过了普通井盖。
Load and impact strength test, found that this covers the load of 24 tons, the impact strength is higher than that of conventional manhole cover.
而随着EM G含量的增加，材料的冲击强度显著提高，且其它的力学性能基本保持不变。
The notched Izod impact strength of alloy increases with the increasing of EMG content in the condition of keeping other mechanical properties.
硬质橡胶是一种具有高强度、高硬度、高模量以及良好无缺口抗冲击强度的特种橡胶制品。
Ebonite is one kind of special rubber product with high strength, high modulus, high hardness and fine unnotched impact resistance.
系统研究了材料的组成对表面硬度、透光率、冲击强度、热变形温度、密度等性能的影响。
The effects of componets and contents on surface hardness, impact resistance, defromation start temperature, density an so on were systematically studied.
阐述了试样尺寸，温度、湿度、缺口以及缺口加工方式等因素对塑料冲击强度测试结果的影响。
It expatiated the effects of the factors, such as sample size, temperature, humidity, notch and etc, on the result of the plastic impact strength test.
测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能；
The tensile strength, bending strength, impact strength, tensile modulus of elasticity and bending modulus of elasticity were determined.
测试了塑木板材的拉伸强度、弯曲强度、冲击强度、拉伸弹性模量、弯曲弹性模量等力学性能；
The tensile strength, bending strength, impact strength, tensile modulus of elasticity and bending modulus of elasticity were determined.
应用推荐