• 介绍了大型球铁齿轮的无冒口铸造工艺。

    The feederless foundry method for a large ductile iron gear wheel was described.

    youdao

  • 空心微珠保温冒口是一项先进的铸造工艺。

    The hollow fine particle insulating riser is an advanced founding technique.

    youdao

  • 介绍了球铁件锥形冒口的原理和设计方法。

    The principle and design of tapered feeder for ductile iron castings were introduced.

    youdao

  • 冒口的当量热节设计法,概念直观,计算简单。

    The equivalent hot spot method for riser design has the advantages of direct visual and simple calculation.

    youdao

  • 运用大孔出流理论设计了顶注压边浇冒口系统。

    Based on the large orifice discharge theory, the kiss gating system of the casting was designed.

    youdao

  • 取消冷冒口后,缩孔、缩松问题成功地得到解决。

    After canceling the cold riser the shrinkage problem was successfully solved.

    youdao

  • 铸造过程中不再需要浇口和冒口也是其一大优点。

    It is also a merit that no feeders or risers are needed.

    youdao

  • 介绍几种板类铸件不增加铸件热节的冒口设置方法。

    This article introduces riser locating way for several kinds of plate castings.

    youdao

  • 本文还对该浇冒口系统提高补缩效果的原因进行了初步分析。

    The cause of the effect of shrinkage improvement in this pouring system is also analysed.

    youdao

  • 试验表明,以江西陶土为基的冒口隔片材料具有良好的性能。

    Our experiments have shown that the core material, based on the Jiangxi-produced pottery clay has good properties.

    youdao

  • 冒口是在铸模内部增加的额外空间,用于容纳过多的熔化金属。

    A riser is an extra void created in the mold to contain excessive molten material.

    youdao

  • 在此期间熔化金属可能从冒口回流供给零件以保持其形状不变。

    During this time molten metal may backflow from the molten risers to feed the part and maintain the same shape.

    youdao

  • 测温试验表明,冒口放在热节上,热节处的凝固时间延长80%;

    The temperature measuring results show that in case that the riser is located on hot spot, the solidifications time of hot spot is prolonged by 80%.

    youdao

  • 将当量热节概念应用于冒口设计,提出了冒口的当量热节设计法。

    An equivalent hot spot design method for riser was designed through application of equivalent hot spot in riser design.

    youdao

  • 保温冒口的作用是通过延长冒口凝固时间来提高冒口的补缩效率。

    The effect of heat insulting feeder is to increase the feeding effect of the feeder through prolonging its solidification duration.

    youdao

  • 采用发热保温冒口,由于冒口的补缩效率提高,缩松倾向明显减少。

    The distribution of porosity defects can be reduced to the least by using exothermic insulating riser.

    youdao

  • 本文对铝合金铸件陶瓷冒口隔片的材料、性能及主要工艺参数进行探讨。

    This paper studies the material, performance and main technical parameters of the Pottery clay knock-off core of the aluminum alloy castings.

    youdao

  • 介绍均衡凝固的基本原理,叙述铸件结构、冒口位置和冷铁对补缩的影响。

    The basic principle of the proportional solidification theory was introduced, and the influences of casting construction, feeder position and chill on feeding effect was described.

    youdao

  • 实践证明采用均衡凝固收缩模数法设计液压试验平台浇冒口系统是可行的。

    The practice shows that it is feasible to design kiss gating-feeder of hydraulic test platform by applying moduli calculation method.

    youdao

  • 热节的位置、大小受铸件结构、铸型材质和浇冒口系统的开设位置所影响。

    The changes of place and size of casting hot spot with the time are based on structure of casting, material of mould and the position of gate and riser.

    youdao

  • 介绍了一种以漂珠、附加保温材料和水玻璃粘结剂混制而成的保温冒口套。

    A kind of insulating sleeve combined with hollow particles, added insulating material and sodium silicate adhesive is introduced.

    youdao

  • 所得铸件的成品率为95%以上,浇冒口系统重量占铸件重量的20%以下。

    The said process has a finished product rate higher than 95% and a sprue and riser head system weight lower than 20 wt% of the casting.

    youdao

  • 系统主要功能包括:通用铸造工艺参数设计、实用冒口设计、浇注系统设计等。

    This system consists of the common casting process parameter design module, the practical riser design module, the gating system design module, and soon.

    youdao

  • 型砂在型模周围成形,并根据需要安放闸道、浇道、冒口、排放口和浇注杯等。

    Sand is formed about the patterns, and gates, runners, risers, vents and pouring cups are added as needed.

    youdao

  • 结果显示,仅通过增加冒口,就可对原工艺方案进行优化,并满足其技术要求。

    The results show that only adding risers for process optimization, the original casting process is modified, and the casting technical requirement is met.

    youdao

  • 本文根据均衡凝固原则、有限补缩的方法,推荐了厚大铸铁件的顶冒口尺寸系列。

    In accordance with proportional solidification principle and limited feeding method, a series of top riser size is recommended to heavy castings.

    youdao

  • 表明采用收缩模数法计算浇注系统尺寸,用浇注系统补缩的无冒口工艺是可靠的。

    The results show that the gating and feeding system without riser is reliable through calculating the sizes of gating system by moduli calculation method.

    youdao

  • 本文针对提高铸钢件冒口补缩效率问题,给出了微珠保温冒口的配方及生产工艺;

    This article is written to explain how to improve the efficiency of riser feeding for cast steel items.

    youdao

  • 系统实现了冒口工艺的自动设计,为模拟验证乃至实际生产提供较佳的推荐方案。

    The results show the designed risers are reasonable. This system realized the automatic building of risers. It can provide a proximal optimum process for CAE valuation and even practical production.

    youdao

  • 系统实现了冒口工艺的自动设计,为模拟验证乃至实际生产提供较佳的推荐方案。

    The results show the designed risers are reasonable. This system realized the automatic building of risers. It can provide a proximal optimum process for CAE valuation and even practical production.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定