该检测系统由光应力分系统、电应力分系统、热应力分系统等组成。
The detection system consists of optical stress subsystem, electrical stress subsystem, thermal stress sub - systems and other components.
依据新配置的光应力系统试验要求，需设计一套大视场、宽光谱、长焦距的微光准直物镜。
Based on the new configuration of optic stress system, we need to design a wide bands and long focal night vision collimating lens.
本文将边界元法引入光弹性应力分析使主应力分离问题得到简化，从而使光弹性应力分析方法更简便可行。
In this paper we use boundary element method to separating main stress. It can simplify the problem and provide a practical method for separating main stress.
主应力分离是光弹性应力分析的关键问题，但已往所用的方法都比较繁琐。
The key of photoelastical stress analysis is separating main stress, but the methods which we have used before are complicated.
通过对埋设于570中段光弹性应力计的观测，分析了该中段矿柱破坏的情况及原因。
The cause of mine pillar destruction in in Dachang Tongkeng Tin Mine was analyzed from observation by photoelastic stressmeter embedded in mine stope 570.
运用折射率椭球分析晶体的弹光效应，给出了三方晶系沿光轴方向的应力与折射率的变化关系。
The relation between the stress along the optical axis of trigonal crystallographic system and the refractive index is established.
它还十分适用于存在初应力的模型材料光弹性分析问题。
It is also applicable to the problem of photo orthotropic elastic analysis for the model materials with residual stresses.
与光弹性方法不同的是声弹性方法不需要透明模型，能直接测量材料的应力分布。
Different from photoelastic method, acoustoelastic method does not need transparent model and can measure stress distribution of material directly.
在讨论和分析图像形态学原理和几种基本运算的效果基础上，提出了将图像形态学技术应用到光弹应力分析中。
Based on the principles of image morphology and several basic operations, this paper proposes applying the image morphology technology in the analysis of photoelastic stress.
文中采用陈至达(1962年)的光测应力分析基本方程，并导出适合于光弹性数据处理的三次样条函数。
Basic equation of photoelastic stress analysis by Chen (1962) is adopted; and a cubic spline function suitable for processing of photoelastic data is derived.
本文介绍了运用激光散射光弹性法对钢化玻璃绝缘子钢化应力进行的实验研究。
The experimental research is introduced in the tempered stresses of the toughened glass insulator with laser scattered light photoelasticity.
以光弹性法及焦散线法的基本原理为基础，对两种方法在确定应力强度因子方面进行了比较。
Based on the principles of transmitted caustics as well as photoelasticity, the two techniques in determining stress intensity factors (SIF) are compared.
本文利用自制的光粘弹性材料，用光弹性法研究了在轴向拉伸荷载作用下带有圆孔的杆件中的粘弹性应力集中系数。
A photoelastic study for the viscoelastic stress-concentration factors in bars with a round hole under axial tension load, using self-made viscoelastic materials is presented in this paper.
本文在大量观察和分析碳钢应力促发表面蝶状马氏体光镜形态的基础上，对其形成条件及立体形态进行了初步实验研究。
In this paper the formation condition and morphology of the stress induced butterfly martensite in carbon steel are studied by analyzing a great number of specimens.
本文介绍了采用三维光弹性应力冻结法，对旋转正方形试样半边裂纹应力强度因子进行研究的成果。
This paper introduces a research result on the stress intensity factors of crackles on single side of revolving square sample with the stress freezing in three-dimensional photoelasticity.
运用光弹性理论及测试技术，对抽油机用新型圆弧齿同步带的应力分布状态进行了光弹性实验研究。
The authors, by photoelastic technique, make an experimental investigation in the stress distribution on the new type circular-arc-teeth synchronous belt.
在光弹应力分析中，利用分数级条纹可以提高分析精度，于是，产生分数级条纹的方法研究就变得非常重要。
In photoelastic stress analysis, the accuracy of analysis can be improved by using fractional isochromatic fringes, so it is very important to study the approach for producing fractional fringes.
本文从相似关系着手提出了一种测定薄壳应力的光弹性贴片方法。
A double photoelastic coating method for shell stress measurement based on the principle of similarity is suggested.
爆破与高速冲击载荷产生的应力波在弹性结构物中的传播，在理论分析上极为困难，但这类问题可以用动态光弹性法进行分析。
Stress wave propagating in elastic structures under impact or explosive loading is a very difficult problem analytically. But the problem could be analysed by dynamic photoelasticity.
通过有限元计算及光弹性实验，结果证明，滚针轴承的接触应力分布与轴承手册和教科书中所给出的公式不符。
After calculating with finite element method and photoelastic-test, it shows that the contact stress distribution is not in keeping with the formulas given by some bearing hand books and textbooks.
以最新的激光动光弹为实验手段，对初始应力条件下的爆破应力波的传播过程进行了实验研究。
A new dynamic holophotoelasticity method is used in laboratory test to study propagation of dynamic stress by blasting subjected to initiative stress.
文中还对内边界受冲击力作用的镶嵌圆环进行了动光弹实验，结果表明，应力分布局限在有限范围内。
An experimental study of inlaid circular ring under impact force on interior boundary is also conducted. The result shows that the stress is distributed in a limited scope.
根据现有的地质和地球物理资料，对青藏及邻区现代构造应力场进行了激光全息光弹模拟实验。
Based on the available geological and geophysical evidences, laser holographic photoelasticity of the present tectonic stress field of Qinghai-Xizang and its vicinity have simulated.
文中主要介绍了在光测力学中全息光弹性法进行应力测定的原理、实验过程及计算方法。
The paper has mainly introduced the principles of stress determination, the experimental processes and the calculation methocl of holographic optical elasticity in optical measurement mechanics.
将光弹性力学与土力学相结合，对加载方法和模型应力的换算进行了新的探讨。
Considering the combination of photoelasticity with soil mechanics, the new loading method of model and the special calculation formula of model stress are applied.
本文用动态光弹性方法，分析冲击荷载作用下岩洞周边的动应力分布和动应力集中系数。
In the present paper the dynamic stress distribution and stress con-centration factor in the neighbourhood of caverns under impulse loadingare given by using dynamic photoelastic method.
可将四分之一波片卸去，并按平面偏振光法或内插法来决定其主应力方向。
The directions can be obtained by removing the quarter-wave plate and following the procedure for plane polarized light or by interpolation.
本文在推导均衡光弹性复合材料应力(应变)—光定律的基础上，导出了均衡光弹性复合材料的近似应变—光定律。
Based on the stress (strain) -optic law derived from balanced photoelastic composite materials, a new approximate strain-optic relation for photoelastic analysis is pro - posed.
为了使磁光式光电电流互感器实用化，研究了影响它精确度的主要因素：温度和应力。
The effects of temperature and stress on the measurement accuracy of magneto optical current transducer were deeply studied, in order to promote its practical application.
为了使磁光式光电电流互感器实用化，研究了影响它精确度的主要因素：温度和应力。
The effects of temperature and stress on the measurement accuracy of magneto optical current transducer were deeply studied, in order to promote its practical application.
应用推荐