在各种不同的光学方法中，干涉测量法具有分辨率高和动态范围大的优点。
There are a variety of optical methods among which the interference measurement has the advantage of high resolution and wide dynamic range.
实验结果与光学方法所得结果相一致，但在判明位错的性质方面，X射线形貌术有其独特的优点。
Some experimental results are consistent with the results obtained by optical methods, however, X-ray method has its special advantage in discriminating the properties of dislocations.
叙述了获得分形图像的一种光学方法。
An important optical method of generating fractal pattern is described.
介绍了一种测量固体薄膜厚度的光学方法。
An optical method was introduced for measuring the thickness of solid thin films.
提出了一种大型桥梁结构截面挠度测量的光学方法。
An optics method for measurement of beam section deflection of major bridge structure is put forward.
提出了用导波光学方法测量交联型聚合物材料的交联温度。
Guided-wave optics method is used to determine the temperature of the crosslinking polymer films.
介绍了工程中用激光光学方法检测柱状结构内尺寸参数的新进展。
The latest developments on the cylindrical inner dimension measurement with laser optical methods are introduced in this paper.
介绍了一种新的在体实时监测血流变参数的光学方法——光散射法。
A method based on optical scattering for in vivo real time measurement of parameters of hemorheology is suggested.
利用几何光学方法研究了由左手性介质制成的简单透镜的光学特性。
Unique optical properties of the simple lens composed of left-handed material (LHM) are reasonedly studied here according to Geometrical Optics.
在较高精度面形测量的光学方法中，很多测量范围都受到光波波长的限制。
The ranges of most optical methods which are used in high precision surface profiling, are limited by the wavelength of light.
传统光学光刻技术的高成本促使科学家去开发新的非光学方法，以取代集成电路工厂目前所用的工艺。
The high cost in traditional optics lithography drives the scientists to invent new non-optical methods to replace processes currently used in IC factories.
全文分为二部分，第一部分研究时空域衍射理论和算子光学方法，及其在激光光学和强激光技术中的应用。
Part I deals with the diffraction theory in the time -space domains and operator optical methods, as well as their applications to laser optics and high power laser technology.
结果显现指纹清晰，通过与定向反射、暗视场照相方法进行比较，偏振光照相效果明显好于其他光学方法。
Result To compare with the directional reflection photography and darkfield photography, polarization photography is better than the other methods.
将二元光学方法与环形光栅的概念结合起来，为制作可以集成到光电系统的环形光栅以及其他光学元件提供了一条较好的思路。
Combining binary optics methods with the notion of circular grating, it offers a good thinking for circular grating and other optic elements that can be assembled into photoelectricity system.
本文提出一种测量电气化铁路接触线高度和拉出值的光学测量方法。
Proposes an optical method of measuring the height and stagger of contact wire simultaneously in railway electrification.
它们从大块的材料上分离出来，其方法和传统的光学纤维提取差不多。
They are drawn from a much larger "preform" block of material, in much the same way that conventional optical fibres are created.
采用光学测量方法，不仅能精确测量甲烷气体浓度，而且安全可靠。
The optical measurement method can not only be used to accurately measure the concentration of methane gas, but also be safe and reliable.
对《墨经》光学八条的主要概念进行归类整理和详细分析，为最终正确理解经文含义尝试一种新的思路和方法。
To reveal the real meaning of the eight items about optics in Mojing, this paper tries a new method to sort out and analyze the main concepts about these items.
结果表明，用小波分析方法研究光学信息处理问题是完全可行的，且更符合实际情况。
The results show that it is feasible for the method of wavelet analysis to be used to study the problems of optical information processing, and it is more accordant with practical circumstances.
气囊式抛光技术是一种新颖的先进抛光工艺方法，能实现光学表面的确定性加工。
Bonnet tool polishing is a novel and advanced polishing method, which can realize quantitative removing of optical surface.
针对飞机叶片表面变形量测量要求提出一种非接触式光学测量方法。
This paper presents an untouched optical measuring method in finding out the deformation of an aircraft engine vane.
本文叙述了一种不受干涉仪系统误差及试样加工误差限制的测试光学材料均匀性的方法。
This paper describes a method for the homogeneity measurement of optical material which is free from the system errors and the sample geometrical errors.
本文提出了一种新的空间编码方法并利用阴影投射系统实现了光学并行模糊逻辑门。
A new spatial encoding method is presented to implement optical fuzzy logic gates by using shadow-casting.
计算机仿真结果表明，该方法能有效地进行涡结构识别，为基于涡结构的光学传输精确建模奠定了基础。
The computer simulation shows that the proposed method is valid using vortex structures recognition, and it provides basis for optical propagation model based on turbulence vortex structures.
此方法已成功地应用于自行研制的衍射光学元件三维表面形貌测量系统中。
The method has been successfully used in the system for measuring the 3-d surface topography of diffractive optical elements.
为提高自由曲面型面加工精度，提出了在计算机控制光学表面成型工艺中基于压力控制的抛光修正方法。
A method is developed for correcting the accuracy of non rotating and aspherical lens by controlling the pressure of the polishing die during computer controlled optical surfacing (CCOS).
这种方法导致了光学组件变得更大、更重而且趋于复杂化，光学制造成本较高。
This approach leads to large, heavy and complex optical assemblies and a higher manufacturing cost for specialized optics.
芬克教授及其团队的研究成果发表在《生物医学的计算机方法与程序》期刊，以及国际光学工程学会(SPIE)会刊上。
The work by Prof Fink and his team is published in the journal Computer Methods and Programs in Biomedicine and in the Proceedings of the SPIE.
芬克教授及其团队的研究成果发表在《生物医学的计算机方法与程序》期刊，以及国际光学工程学会(SPIE)会刊上。
The work by Prof Fink and his team is published in the journal Computer Methods and Programs in Biomedicine and in the Proceedings of the SPIE.
应用推荐