函数SetEvent()用来将事件对象的状态设置为有信号状态。
The function SetEvent() is used to set the state of the event object to signaled state.
对事件对象调用的等待函数会阻塞调用线程,直到其状态被设置为有信号状态为止。
The wait function on the event object blocks the calling thread until its state is set to signaled state.
这个函数会使用一个互斥对象的句柄,并一直等待,直到它变为有信号状态或超时为止。
This function takes the handle to the mutex object and waits until it is signaled or timeout occurs.
本发明公开了一种退避方法和装置及检测射频识别信号状态的方法和装置,属于通信领域。
The invention discloses a back-off method and a back-off device, and a method and a device for detecting a radio-frequency identification signal state, and belongs to the field of communications.
推导了多路高动态GPS信号的数学模型,并提出在信号状态计算中增加两个参数以反映高动态的影响;
The mathematic model of high-dynamic GPS signal was derived, and it was suggested to add two parameters to emulate high-dynamic effects.
这个函数使用一个信号量对象的句柄作为参数,并会一直等待下去,直到其状态变为有信号状态或超时为止。
This function takes the handle to the semaphore object and waits until it is signaled or a timeout occurs.
中断信号状态发生于传输暂停时,此时线路会置于中断状态(全部都低,没有停止位元)直到其释放为止。
The break signal state occurs when a transmission is suspended and the line is placed in a break state (all low, no stop bit) until released.
将未知噪声统计量的估计与信号状态估计交替进行的算法引入G P S定位,计算机模拟结果表明效果很好。
Estimation of unknown noise statistics quantity and estimation of signal states are alternatively done, this method is applied to GPS positioning, Computer simulation shows the approach is efficient.
在Windows中,事件对象是那些需要使用SetEvent函数显式地将其状态设置为有信号状态的同步对象。
In Windows, event objects are one of the synchronization objects whose state needs to be explicitly set to signaled using the SetEvent function. Event objects come in two types.
在自动重置事件(auto reset event)中,对象的状态会一直维持为有信号状态,直到单个正在等待的线程被释放为止。
In the auto reset event, the state of the object remains signaled until a single waiting thread is released.
要等待某个事件,则可以使用 semop()函数,并将 sem_op 的值设置为-1,这样就可以阻塞调用进程,直到它变为有信号状态为止。
To wait on an event, semop() function is used with sem_op value as -1 thus blocking the calling process until it is signaled.
在手工重置事件(manual reset event)中,对象的状态会一直维持为有信号状态,直到使用ResetEvent函数显式地重新设置它为止。
In the manual reset event, the state of the object remains signaled until explicitly reset using the ResetEvent function.
bManualReset是一个标记,如果该值为TRUE,就会创建一个手工重置的事件,应该显式地调用ResetEvent,将事件对象的状态设置为无信号状态。
BManualReset is a flag and if it is TRUE, a manual-reset event is created and ResetEvent should be called explicitly to set the state to non-signaled.
如此说来,也许张嘴打哈欠只是一种即将改变状态的信号,而不是疲倦本身的表现;由醒到睡,反之亦然。
Perhaps, then, an open mouth is more a sign of some impending change of state rather than a statement of tiredness itself; awake to asleep or vice versa.
这种状态的变化会影响鸟类视觉信号在细胞中的传输,最终造成鸟类对磁场的感知。
The state alters the flow of cellular signals through a bird’s visual pathways, ultimately resulting in a perception of magnetism.
同样通过降低电压和频率,C1E尝试比传统C1状态(只会停止时钟信号)提供更大的电能节省。
C1E tries to provide more power savings than the traditional C1 state (which only halts the clock signal) by also lowering the voltage and frequency.
至于类如无线信号、电池电量等状态信息则被显示在其中一块屏幕的边沿。
Statuses, like wireless signal and battery life, are displayed along the rim of one of the screens.
研究人员使用携带型脑电图仪记录了16名被诊断为处于植物人状态的患者大脑中传来的电子信号。
Researchers used a portable electroencephalography (EEG) device to record electrical signals from the brains of 16 patients diagnosed as being in a vegetative state.
子进程从终止时起就一直处于僵死状态,直到父进程确认该信号为止。
From the time the child dies until the time the parent acknowledges the signal, the child sits in a zombie state.
通知,通过通知某个必要设备的状态发出信号。
Notification via a notification of the state of a required device.
在某些情况下特别的变化能触发一个信号——折叠的或方形的状态将激活一些其他的酶,或在细胞中打开一个通道。
In some cases the specific change triggers a signal - the folded or square position may activate some other enzyme, or open a channel in a cell.
然后,当第一个对象“发出”信号(由于状态的内部变化)时,第二个对象“捕获”该变化并作出适当的反应。
Then, when the first object "emits" the signal (due to an internal change in state), the second object "catches" this change and reacts appopriately.
未禁用信号处理程序时,进程在“当前”状态中可能表现为正在进行信号处理,从而可能隐藏了真正问题。
When the signal handler doesn't disable, the process might show up in the "current" status as signal handling, which might hide the real problem.
如果子进程在父进程之前终止,则会向父进程发送一个信号,然后子进程转变为僵死状态,直到该信号得到确认,或父进程被终止。
If the child dies before the parent, a signal is sent to the parent, and then the child moves to a zombie state until the signal is acknowledged, or the parent process is killed.
当正在等待的线程被释放时,其状态就被设置为无信号的状态。
When the waiting thread is released, the state is reset to non-signaled state.
Android的主界面上有一个状态栏,可以显示时间、信号强度和其他通知。
Android home screen includes a status bar which shows the time, signal strength and other notifications.
在内部,Shell使用UNIX信号来影响进程的状态。
Internally, your shell USES UNIX signals to affect the state of processes.
在上述死循环的情况下,所有除主线程之外的线程都处于某种等待状态(等待一个信号量,或等待某个事件)。
In the infinite loop case above, all threads except main are in a waiting state (on a semaphore, or waiting for some event).
接收到SIGSTOP和 SIGTSTP 等信号时,进程将进入这种状态。
On receipt of signals like SIGSTOP, SIGTSTP, and so on, the process arrives at this state.
Stein博士认为神经细胞膜良好的工作状态,以及信号分子的传递需要充足的矿物质,维生素,和脂肪酸。
Dr Stein believes that the proper functioning of nerve-cell membranes and signalling molecules depends on adequate supplies of minerals, vitamins and fatty acids.
应用推荐