• 使用误差估计值的平均值来校正后续伪路程测量值中的误差。

    The mean value of the error estimates is used to correct the error in future pseudo range measurements.

    youdao

  • 通过讲述浮子液位计的组成和工作原理,分析其系统误差、安装误差和使用误差。

    This article introduces the component parts and the operating principle of the ball float liquidometer, and analyses the errors of its system, installation and operation.

    youdao

  • 这已经是一个较好的值,因为它可以保证优化器在使用分位数统计信息的情况下对确定过滤因子的估计误差最大只有5%。

    This is already a good value because it guarantees that the optimizer, by using the quantile statistics, only has an estimated maximum error of 5% for the determined filter factors.

    youdao

  • 先前,科学们使用WMAP观测的数据计算的大爆炸至今的时间是极其精确的137亿3千万年(前后误差1.2亿年)。

    Previously, scientists using data from WMAP measured the time since the Big Bang to be an incredibly precise 13.73 billion years (give or take 0.12 billion years).

    youdao

  • 浮点数不是精确值,所以使用它们会导致舍入误差。

    Floating point Numbers are not exact, and manipulating them will result in rounding errors.

    youdao

  • 计算结果表明,使用经各种误差修正后的测速数据参与初轨计算能有效提高定轨精度。

    The result shows that using velocity measuring data after error correction in preliminary orbiting computation can effectively improve the orbit determination precision.

    youdao

  • 叙述了液柱式压力计的精度,对U形管压力计和双管差压计的正确使用方法及误差修正做了简要分析。

    The precision of liquid column manometer was described. The correct use method and error correction of U tube manometer and double tube differential pressure gauge were analysed.

    youdao

  • 使用WVR能精确测定对流层时延误差。

    Troposphere delay error could be accurately determined using WVR.

    youdao

  • 本文对激光车轮定位仪的原理,使用及误差分析作一概要介绍。

    In this paper, the principle, use and error analysis of the laser wheel location apparatus are explained briefly.

    youdao

  • 基于三轴数控机床的空间误差模型,使用三维步距规识别数控机床空间几何误差。

    Based on error model, the three dimension-stop gauge was used to identify the space errors of CNC machine tools.

    youdao

  • 用高斯-牛顿误差最小法将六维观测量转化为四元数,作为观测量的一部分,显著减少了直接使用EKF的计算量。

    Gauss-Newton error minimization is used to transform six-dimentional reference vector to quaternion as a part of observations for EKF, which significantly reduces the computational requirement.

    youdao

  • 结论术中判断误差和器械使用不当,是牙体进入软组织间隙的主要原因。

    Conclusions the reason of tooth entered soft tissues is judgment error and improper use of the instruments during the surgery.

    youdao

  • 当光斜入射时,在新坐标系下采用小角度近似,琼斯矩阵方法可以在极小的误差下有效使用。

    With the wave slanting and a small Angle approximated in a new coordinate system, the Jones matrix method could be used effectively with a small error.

    youdao

  • 我如何指定在GLM使用负二项式误差分布?

    How do I designate a negative binomial error distribution in a GLM using r?

    youdao

  • 计算机仿真结果表明本文使用的等效斜视距离模型的误差较小,CA -ECS算法能有效地完成加速度运动补偿。

    The computer simulation results illustrate that the squint range model has less error and CA-ECS algorithm can be used to accomplish motion compensation with acceleration efficiently.

    youdao

  • 该方法使用了时频同步跟踪环路,从数据子载波提取相位误差,并利用频域插值补偿多个用户的估计频偏。

    The system uses time-frequency tracking loops to extract phase errors from data subcarriers with frequency interpolation to compensate for the estimated carrier frequency offsets.

    youdao

  • 介绍了一种使用偏振分光棱镜的新型光桥式补偿技术,并对因棱镜消光比变化导致的误差进行了研究。

    A novel optic bridge compensation technique using a polarization splitting prism is introduced, and the errors caused by the changes of prism's extinction ratio are studied.

    youdao

  • 研究说明陀螺经纬仪的使用,可以减少地下导线测量的误差传播。

    Study proves that use of gyroscopic theodolite can decrease the error propagation in the underground traverses survey.

    youdao

  • 所以,为了尽量降低误差,最好使用尽可能低的电压源量程。

    Therefore, it's best to use the lowest possible voltage source range in order to minimize error.

    youdao

  • 讨论了多普勒频率差定位技术的实现方法,推导了定位误差公式,并给出了实际使用时的简化而直观的形式,同时进行了数值模拟。

    The realization of location using the difference of doppler frequency is discussed, the formula for the location error is derived and its simplification form with data simulation is presented.

    youdao

  • 使用微欧计进行电阻测量必须采取四线技术以使测试电缆和连接器带来的误差减至最小。

    Measurements made using the micro-ohmmeter are always performed using the four-wire technique in order to minimize errors caused by test leads and connections.

    youdao

  • 介绍了补偿器的原理;指出了在实际工作中如何正确使用全站仪以减少竖轴倾斜误差对测量结果的影响。

    It introduced the principle of compensator of total station and pointed out how to exactly use a total station to decrease the influence of the vertical axis tilt error.

    youdao

  • 然后对位置估计结果使用残差加权算法进行NLOS误差抑制。

    Then it USES Residual Weighting Algorithm to the result of estimation in order to restrain NLOS error.

    youdao

  • 研究结果表明使用本方法可大大提高热误差补偿模型的鲁棒性、通用性和精度。

    The result of proposed modeling method indicates that it can highly improve the robustness, versatility and precision of the thermal error compensation model.

    youdao

  • 使高电压通道远离敏感的小电流通道,并使用良好屏蔽的开关,可将这种误差降至最低。

    This can be minimized by locating the high voltage channels away from the sensitive low current channels and by using well-shielded switches.

    youdao

  • 然而,过采样转换器的模拟部分可以使用简单和对误差不敏感的器件实现。

    In contrast, oversampling converters can be implemented using simple and high-tolerance analog components.

    youdao

  • 本文介绍了该系统的X射线成像原理、光路分析以及标尺和参考球的使用,并对标尺的固有误差作了分析。

    The X-ray image principle and the mark ruler and standard sphere are introduced in this paper. The error from the mark ruler is also analyzed in the paper.

    youdao

  • 轮叉类零件是自行车和摩托车中的关键零件,其位置误差对使用性能影响很大。

    As key components of bicycles and motorcycles, fork parts positioning errors influence their functions seriously.

    youdao

  • 轮叉类零件是自行车和摩托车中的关键零件,其位置误差对使用性能影响很大。

    As key components of bicycles and motorcycles, fork parts positioning errors influence their functions seriously.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定