我们的标准产品上装有含6英尺电线和双位开关的电箱。
On the standard item we mount an electrical box with 6 foot cord and on off switch.
介绍了水处理系统中热扩散式液位开关的原理及应用,分析了热扩散式液位开关的优点。
The principle and application of the thermal diffusion liquid level switch in water disposal system are introduced; moreover, its virtues are analyzed.
下部装置——包括下部机壳、进料口、尾轴装配、张紧装置,并有旋转探测仪、料位开关供选配。
Lower device ~ lower casing, charger inlet, tail shaft assembly, tensioner, and with optional rotary detector and level switch.
定位器、P/P定位器、空气过滤减压阀、气动加速器、气控阀、限位开关、电磁阀、闭锁阀、速度控制器、阀位传送器等。
E/P Positioner, P/P Positioner, Air-set, Booster relay, Air-valve, Limit switch, Solenoid valve, Lock-valve, Speed controller, Position transmitter, etc.
我们的标准产品上装有含6英尺电线和双位开关的电箱。如果尺寸对你们来说很重要的话,请在订购前指明。
On the standard item we mount an electrical box with 6 foot cord and on off switch. If dimensions are a critical issue please talk to us before ordering.
计算机科学家哈里·波特(Harry Porter)博士用继电器制作了一台八位机。继电器是一种电子开关,是比Magic- 1用的晶体管更加简单的元器件。
Computer scientist Dr Harry Porter built his 8-bit machine from relays - electronic switches that are even simpler than the transistors used in Magic-1.
两位五通阀(8)的控制端通过开关(11)与压缩气进气管连接。
The control end of the two-position five-way valve (8) is connected with a compressed air inlet pipe through a switch (11).
我们在单片FPGA中完成了6个端口、32位数据总线宽度交叉开关的设计。
We complete the design of crossbar switch with 6 ports and 32 bits data bus on one chip of FPGA.
缸头和缸底的同一位置上均安装一接近开关,该两接近开关分别处于缸筒两端。
The proximity switches are arranged on the same positions of the cylinder head and the cylinder bottom, just on two ends of the cylinder barrel.
两位五通阀(8)上有行程点压开关(8.1),行程点压 开关(8.1)置于汽车车厢或货罐体底部。
A travel point pressure switch (8.1) is arranged on the two-position five-way valve (8) and arranged at the bottom of the vehicle body or the cargo tank body.
欢迎选用我厂研发的新型料位器与接近开关,助您在激烈的市场竞争中永远领先一步。
Welcome to choose our newly developed level sensor and proximity switch to ensure your leading position in fierce market competition.
该变换器电路结构上采用正激一零电流准谐振软开关电路拓扑结构,并结合了有源钳位技术;
This module uses a circuit topology of forward pulse width modulated - zero current quasi - resonance soft - switching , combined with active clamp technology.
本实用新型具有开关锁位更加稳定、可靠等优点。
The utility model has the advantages of more stable switch locking and reliability, etc.
在这个例子中,这个开关能够被转到全开和全关的任一位置,来调整灯泡的亮度。
In this case, the switch can be turned to any position between fully off and fully on to vary the brightness of the bulb.
配置该第二开关以基于该锁存位导通。
The second switch is configured to conduct based on the latched bit.
压力罐装有压力表、压力开关、液位传感器和电加热器。
The pressure tank is provided with a pressure gauge, a pressure switch, a liquid level sensor and an electric heater.
液位传感装置,由密封室中的磁性开关及浮动室中浮子上的磁性材料组成。
The liquid level sensor consists of magnetic switch in a sealed chamber and the magnetic material on the float inside the float chamber.
然而,由于漏感影响,反激变换器功率开关管关断时将引起电压尖峰,必须用钳位电路加以抑制。
However, due to leakage effects flyback converter power switch off when the voltage spike caused by the need to be inhibited by clamping circuit.
浮球开关可以根据所需液位变化,自动控制泵的起动与停止,不需专人看管,使用极为方便。
Float switch can automatically control the start and stop of pump according to the variation of required liquid level, with no need of a special person to care about, making operation quite easy.
对开关柜、断路器继电器的配位是否正确进行测试并设置。
Test and set switch gear and circuit breaker relays for proper coordination.
利用有源钳位电路实现主变压器铁心对称复位,功率开关在宽输入电压和宽负载电流范围内零电压开关。
By using an active clamp circuit, the power transformer core is symmetrically reset. Zero voltage switching conditions are achieved over a broad input voltage and output current range.
这意味着,依赖于缓冲器的填充状态和负载的操作模式,基于IGBT的开关单元从一个位置切换到另一位置。
That means the IGBT-based switch unit switches from one position to the other depending from the filling status of the buffer and the operation mode of the load.
当所述脚踏开关在第三位置时,所述作业工具控制器的位置被保持并且 所述地面驱动控制器的位置被保持。
When the foot pedal is in a third position, the position of the work tool control is maintained and the position of the ground drive control is maintained.
当所述脚踏开关在第一位置时,所述作业工具控制器和地面驱动控制器不受影响。
When the foot pedal is in a first position, the work tool control and ground drive control are not affected.
配置该第三开关以基于该锁存位和所述位串中的下一位导通。
The third switch is configured to conduct based on the latched bit and a next bit in the series of bits.
浮子随被测液位上下移动时,触动磁簧开关而检测出液位位置。
With the measured liquid level float moves up and down, touched the reed switches and detect the level position.
浮子随被测液位上下移动时,触动磁簧开关而检测出液位位置。
With the measured liquid level float moves up and down, touched the reed switches and detect the level position.
应用推荐