机电伺服系统的齿轮传动装置，其齿隙不仅影响系统的伺服精度，更影响系统的稳定性。
The gear clearance in the driving device of the electromechanical servo system shall affect not only the servo accuracy of the system but also its stability.
伺服机构固有频率是影响伺服系统伺服精度、响应能力的重要参数，在设计阶段就需要对伺服机构的固有频率进行计算。
Inherency frequency of servomechanism is to have an influence on the key parameters of servo accuracy and response capability, and demands the calculation of inherency frequency in the design stage.
在控制系统中，将贝叶斯概率引入到模糊rbf神经网络中，增强了系统的推理能力，提高了飞机各个航道位置的模拟伺服精度。
In the control system, Bayes probability is introduced in the fuzzy RBF neural network and it intensity the inference ability and increase the servo precision.
该伺服驱动器在加工中心的实际应用中得到了微米级的加工精度。
The servo driver has been tested on the machining center, up to the accuracy of micron order.
本文从工程实际出发，分析了影响电液位置伺服系统精度误差的来源，并对各主要因素作了定量的分析计算。
This paper analyzes the sources of effecting the error of the accuracy in electrohydraulic position servo system, and carries out quantitative analysis and calculation to main factors.
这些光产生的信号提供更高的精度和可靠性，提高性能和伺服系统的可靠性。
These optically-generated signals provide higher accuracy and reliability, improving the performance and reliability of the servo system.
伺服阀反应快速，统一安装在阀板上，保证了优良的精度和重复性。
The fast-reacting servo valves installed on the integrated hydraulic block ensure excellent precision and repeatability.
本文以提高某跟踪装置的伺服系统的跟踪精度为主要目标，采取了基于数字预测和滤波的计算机辅助控制技术。
To improve the trace precision of the servo system in some tracking set, the text adopts the computer aided control techniques based on digital forecast and filter.
采用该方法，虽然舍弃了由位置传感器构成位置回路的常规设计方法，但情报雷达伺服系统仍然有较高的定位精度。
Although the general design method of the position loop composed of the position sensor is abnegate, but the information radar servo system has high orientation precision in this way.
介绍了一种采用高性能的TMS320F 2812，以及高分辨率的RVDT解算芯片ad2s83的进行高精度伺服系统硬件设计的方法。
This paper presents a method to design high precision servo system controller by using high performance TMS320F2812 and high resolving RVDT compute chip AD2S83.
通过实验数据的比较，显著提高了进给伺服系统的控制精度，减少了跟踪误差。
The comparison of experiments shows that the feed servo system can greatly improve control accuracy and reduce the following error.
本文介绍了超低速、宽高速、高精度电液伺服马达的性能指标、结构特点、设计方法和试验研究。
This paper describes performance indexes, structure features, design method and experimental investigation of electrohydraulic servo motor with super-low-speed, wide speed control and high precision.
高精度高性能的伺服驱动系统需要在宽范围内有精度高、响应快及分辩率高的转速估计算法。
A high precision and high performance servo-drive system needs a rotating speed estimation algorithm which has high accuracy, fast response and high resolution in a wide range.
随着目标速度的提高和光电跟踪设备自动化程度的提高，对电视跟踪器伺服系统的跟踪精度提出了越来越高的要求。
With the increase of both object speed and automatic tracking ability of the optoelectronic tracking equipment, higher precision is needed for the servo system in the TV tracker.
速度滞后补偿是一种提高光电伺服系统跟踪精度的有效方法。
The velocity delay compensation is a effective method to improve the tracking precisions of the photoelectric servo systems.
本论文的研究对于提高三轴光学跟踪试验转台以至于所有电动仿真转台的伺服控制系统的精度来说，是一项十分重要和有意义的工作。
The researches of this paper are very important and significative job to improve precision of servo-control system of three axis optical tracking test table even all type of electric simulator tables.
本文介绍了提高步进伺服系统控制精度的新方法。
In this paper, the method of enhancing the control accuracy for stepping servo system is presented.
结合设计实例详细论述了通信延时对雷达伺服系统跟踪精度的影响，提出了采用常增益滤波法的解决方案，并通过仿真和试验结果加以验证。
This paper discusses the effect of communication delay on radar servo systems track precision based on an engineering design, and offers a solution which applies fixed-gain filter.
大功率名牌双交流伺服马达，寿命长，精度高，响应快，是喷绘机稳定工作的基础。
High-power big brand double AC servo system: long life time, high precision, fast response, is the foundation of stable work of the printer.
超精密数控车床加工精度的提高不仅依赖于数控装置的运算速度和曲线的拟合精度，同时还依赖于伺服系统的跟踪精度和点位控制精度。
The manufacture precision of super exactitude NC lathe depends on not only the operation rate of NC deviceand joined precision, but also the error of track and point location about servo system.
伺服系统的要求：工作精度高、调速性能好、带负载能力强、响应速度快、稳定性和可靠性高。
This system require more, such as high precision, good regulation-speed performance, strong ability with load, quick response speed, high stability and reliability.
为了实现高速度、高加速度和高精度伺服系统的设计，系统的位置环采用智能PID控制。
Then, the paper analyzes a kind of intelligence PID control method and design the intelligence PID controller for the servo system.
结果表明，该方法能克服脉码调制液压伺服系统中控制精度与控制范围，稳定性与快速性之间的矛盾。
The simulation result shows that the method can reduce contradictions between control accuracy and scope, and between stability and fast-speed characteristic.
仿真结果表明，有效提高了转台伺服系统的动态跟踪精度，并具有较好的鲁棒性能。
The simulation result on the servo system indicates that the control method above improves effectively dynamic tracking performance of the servo system and has good robustness.
海洋重力仪是改善舰船惯导系统精度的重要设备，其重力传感器的伺服回路决定着仪器的精度和动态性能。
Sea gravimeter is an important equipment for improving the precision of navy inertial navigation systems. The servo loop of gravity sensor determines its precision and dynamic properties.
火炮伺服系统传动链存在传动齿隙，齿隙是影响火炮伺服系统动态性能和稳态精度的重要因素之一。
Transmission chain of gun servo system has backlash, it is one of the important factors that affect dynamics performance and stable precision of gun system.
但是，由于气动伺服系统的强非线性，对其实现高精度的有效控制一直是个难题。
However, due to its strong nonlinearities, it is difficult for a pneumatic servo system to achieve higher control precision.
伺服控制方法是影响机床定位精度的关键因素之一，要保证数控系统的高定位精度，应采用合理的伺服控制方法。
The position accuracy of machine tool is directly affected by the servo-control method which should be properly selected to ensure the high position accuracy of a CNC system.
伺服控制方法是影响机床定位精度的关键因素之一，要保证数控系统的高定位精度，应采用合理的伺服控制方法。
The position accuracy of machine tool is directly affected by the servo-control method which should be properly selected to ensure the high position accuracy of a CNC system.
应用推荐