基于大型电力系统分析软件NETOMAC，提出了机电暂态和电磁暂态混合时域仿真法。
A hybrid time-domain simulation method integrating electromagnetic transient simulation and electromechanical transient simulation based on large power system analysis software NETOMAC is proposed.
相比于简化解析法，数值仿真法可以得到详细的动力学时历结果以及船体结构损伤变形图。
Compared with the simplified analysis method, the numerical simulation method can obtain detailed time history results of dynamics and damage deformation pictures of ship hull structure.
为了仿真评估电弧炉引起的闪变严重度，对闪变仿真法及其在电弧炉供电系统中的应用进行了研究。
In order to assess the flicker caused by electric arc furnace, the simulation method to assess flicker and its application in electric arc furnace power system was studied.
使用解析法和仿真法分析了SWIM工作在模式2时海浪谱观测的能量误差，两种方法的结果一致。
Two methods, namely, analytical process and simulation process, are adopted to analyze the energy error of retrieved wave spectra by SWIM operated at Mode 2.
分析结果表明，采用数值仿真法可预测成型中可能出现的问题，确定最佳加载路径，获得有效的轴向补料量与内压值。
The results showed that the simulation method could be used to predict the possible problems in shape forming and determine the optimal load path for gaining effective …
介绍了五种计算健康预期寿命的方法：沙立文方法、递减法、增减状态生命表方法、观仿真法、属等级模型法，并对各种方法的优缺点作了述评。
This paper reviews five methods of calculating healthy life expectancy namely Sullivan method double-decrement method multistate life table method micro-simulation method grade of membership model.
研究了动态故障树分析的蒙特卡洛仿真法并给出了仿真的具体步骤，然后利用实例对给定的动态故障树进行了蒙特卡洛仿真，并把仿真结果与精确解进行了比较。
Research Monte Carlo method of dynamic FTA, and given detailed steps, then progress Monte Carlo simulation using example to dynamic fault tree, and compare simulation result with exact solution.
该方法按数学模型对子系统进行结构水平上的分解，运用层次分析法来处理数据获得对子系统的仿真可信性的评估。
This approach analyzes sub-system on the level of construction due to it's digital model , and it gets the system's general credibility with AHP to process data.
本程序采用的仿真策略是事件调度法，故主要的工作就是围绕着事件表进行并处理相应的子程序。
The simulation strategy that this procedure adopts is the event scheduling. Therefore, the main work focuses on dealing with the event table and processing the corresponding subprograms.
在介绍漏磁检测原理的基础上，详细论述了利用有限元法分析缺陷信号的方法以及利用ANSYS对漏磁信号的仿真过程和仿真结果，并对结果进行分析。
On the base of introducing the principle of the magnetic flux leakage (MFL) detection, the finite element method based on ANSYS used to simulate and analyze the MFL signal is presented.
考虑到数字仿真技术的日趋完善和普及，近似解析法的主要目的在于给出定性结果。
Considering the growing popularity and perfection of numerical simulation technique, the purpose of approximate analysis is mainly pointed to giving qualitative results.
在常用于稳态仿真的容积法模型基础上，结合曲柄连杆机构的动力学模型，建立了二冲程柴油机的扭矩预测模型。
Based on control volume model often used for steady state simulation and crank-connecting rod model, a torque generation model for a two-stroke diesel engine was established.
该文对以活动网络图为基础建立的工作流模型，提出了一种基于ABC法的工作流仿真模型的设计与实现。
This article introduces the design and implementation of workflow simulation model based on ABC approach for workflow model based activity network graph.
对由粉碎作业和分级作业构成的闭路粉碎流程，可用循环收敛法进行流程稳态的仿真计算。
For a closed-circuit comminution process composed of comminution and classification operations, the steady-state can be calculated by means of simulating the process with converging locked-cycles.
仿真表明，自适应调制泄漏法在网络处于劣化模式和非劣化模式时都可以有效地抑制指针调整抖动。
Simulations show that adaptively modulated bit leaking method can reduce the jitter in pointer adjustment effectively in both the normal mode and the degraded mode of SDH network.
本文还给出了一种简练的函数构造法，用该方法构造的函数能较好地逼近活动工期概率密度函数，方便了对计划网络图的计算机仿真运算。
It also gives a construction approach for approximating the probability density function of activity duration, which will facilitate the computer simulation of the PERT diagram.
文章介绍了二次相差法的基本原理，并给出了仿真的结果，结果表明该算法具有较高的测距精度。
The paper introduces the principle of the algorithm, simulation results are also given, the results indicate that this algorithm is high accurate for ranging.
理论分析和仿真结果表明，该飞轮卸载法简单且节能，效果明显优于传统的磁卸载法。
The theoretical analysis and simulation results showed that the new control method was simple and little energy consumption, which was much better than the traditional one.
在用蒙特卡罗法进行仿真研究(例如进行测量不确定度评定)时，常常需要发生多个非高斯型互相关的随机数。
In Monte Carlo simulation such as the measurement uncertainty evaluation, it is often necessary to generate correlated multi-non-Gaussian random observations.
讨论了相似理论中的相似准则，以及如何用因次分析法推导数学仿真模型中的相似准则，并举例说明了这种方法的实用性。
This paper discusses similarity criterion in similarity theory, and how to derivate similarity criterion of mathematics simulation model by dimensional analysis. A example for this method is given.
第二，运用实证研究法、调查研究法、仿真模拟法建立了广西北部湾港口群物流系统SD模型。
Second, this paper establishes a SD model for Guangxi Beibu Gulf port group logistics system using of empirical research method, survey research method, simulation method.
介绍了如何采用离散型系统仿真力法，以生产实际数据来建立钢锭从浇注到轧制过程的系统仿真模型的做法。
This paper introduces how to apply discrete system emulation method to establish a system emulation model from casting to rolling for steel ingot based on production data.
在C62货车模型的基础上，通过动力学仿真软件SIMPACK，采用滚动体接触建模法解决了用集装箱装载液体货物的模型问题。
On the basis of an integrated model of C62 freight car, the problem of modeling for liquid transport with containers with dynamic software SIMPACK and contact modeling method.
在分析多体动力学仿真计算中广泛使用的增广法基础上，提出了一种基于稀疏矩阵技术的改进算法。
On the basis of analysis on augmentation approach widely used in the multibody dynamic simulation, an improved algorithm based on sparse matrix technique was proposed.
在分析多体动力学仿真计算中广泛使用的增广法基础上，提出了一种基于稀疏矩阵技术的改进算法。
On the basis of analysis on augmentation approach widely used in the multibody dynamic simulation, an improved algorithm based on sparse matrix technique was proposed.
应用推荐