记住:尽管这里没有显示,目标7总是被保留用于SCSI主机适配器。
Remember: Although it is not displayed here, target 7 is always reserved for the SCSI host adapter.
每条物理链路包括一个位于主磁盘子系统中的主机适配器,以及一个位于辅助磁盘子系统中的主机适配器。
Each physical link includes a host adapter in the primary disk subsystem and a host adapter in the secondary disk subsystem.
限制全带宽性能可能无法实现一个以上的PCI主机适配器每大桥基丁酸酯(PHB)或一个以上的CPU。
Limit Full bandwidth performance may not be achieved with more than one adapter per PCI Host Bridge (PHB) or more than one CPU.
配置主机适配器驱动程序,通过初始ram磁盘进行加载,初始ram磁盘将在引导过程中加载适配器模块时对冗余磁盘应用配置数据。
Configure the host adapter driver to be loaded through an initial RAM disk, which applies the configuration data for redundant disks when loading the adapter module at boot time.
只有当应用程序启动时,资源适配器才能验证类似于主机名称和端口号这样的属性是否正确。
Only when the application starts can the resource adapter verify whether properties such as host names and port Numbers are correct.
您的主机有一个活跃的网络适配器,可以使用它发送请求。
Your host has an active network adapter that can be used to send out the request.
目标主机正在运行,而且在您使用的IP地址上配置了活跃的网络适配器。
The target host is running and has an active network adapter configured with the IP address that you used.
如果无法到达这个网关,那么从您主机上的网络适配器到网关的物理连接可能有问题(例如交换机端口、线路和网卡有故障)。
If it isn't, there may be a problem with the physical connection from the network adapter on your host to the gateway (for example, a faulty switch port, cable, network card).
例如,在FT p适配器模式的情况下,您只需提供FTP服务器的主机名称、输入和输出文件的目录和格式。
In the case of the FTP adapter pattern, for example, you need to provide only the host name of the FTP server, the directories and the format of the input and output files.
外部地址空间应用程序需要首先使用一个优化的本地适配器服务器API(主机服务或接收请求)并标识它们自身作为目标服务。
External address space applications are required to first use one of the optimized local adapter server APIs (Host service or Receive Request) and identify themselves as target services.
这些AIX主机均使用了专用的FC适配器(HBA)。
主机名是IP地址的引用,而IP地址与一个或多个网络适配器相关联。
A host name is a reference to an IP address, and an IP address is associated with one or more network adapters.
发起者可以是主板上的组件或附加的主机总线适配器。
Initiators may be provided as an on-board component on the motherboard or as an add-on host bus adapter.
应该确认用来向主机发送请求的适配器显示为UP和RUNNING。
You should ensure that the adapter used to send packets out to your host is showing as UP and RUNNING.
在写数据时,主机总线适配器(HBA)根据块数据和逻辑块地址生成dif。
On a write, the DIF is generated by the host bus adapter (HBA), based on the block data and logical block address.
服务器上有两个主机总线适配器 (HBAs)、RAID阵列上有两个SAN交换机和两个 RAID控制器。
There are two host bus adapters (HBAs) on the server, two SAN switches, and two RAID controllers on the RAID array.
用于访问带3270屏幕的主机系统的HOD 3270资源适配器。
HOD 3270 resource adapter for access to host systems with 3270 screens.
使用lsdev命令,搜索主机中可供使用的FC适配器。
Search for the FC adapters available in the host using the lsdev command.
磁盘存储系统通过四个QLogicQLA2342光纤通道适配器连接到主机系统上。
The disk-storage system is connected to the host system with four QLogic QLA2342 Fiber Channel adapters.
ANSIT10标准提供一种方法检查从主机总线适配器 (HBA)通过SAN 光纤写到磁盘和读取回的数据的完整性。
The ANSI T10 standard provides a way to check the integrity of data read and written from the host bus adapter to the disk and back through the SAN fabric.
典型例子包括主机API(通过适配器)、XML文档、甚至Excel文档。
Typical examples include mainframes API (through adapters), XML documents and even Excel documents.
每个主机有至少两个fc适配器连接到我们的SAN。
Each host had at least two FC adapters connected to our SAN. The following diagram shows the high-level view of the SAN storage and AIX LPAR connectivity to the existing SAN fabric.
确定AIX主机上 Fibrechannel适配器的WWNN(worldwideNetworkNumber,全球网络编号)。
Identify the Fibrechannel Adapters WWNN (worldwide Network Number) or the AIX host.
对于任何节点,可以创建一个或多个主机名来标识所有网络适配器。
For any single node, one or more host names may be created to identify all of the various network interfaces.
如果适配器已经打开了,可以使用routeget检查从您的主机到目标主机的路由是否正确(见清单5)。
If the adapter is up, you can establish whether the route from your host to the target is correct by using route get (see Listing 5).
物理内存可以位于主机板、适配器卡等等。这个相关联明确地定义了卡与内存之间的关系。
Physical memory can be located on hosting boards, adapter CARDS, etc. This association explicitly defines this relationship of memory to CARDS.
实验框架由主机端软件、特定传输带宽的无线网络、数字媒体适配器、VQM 软件、主观视频质量评价系统等组成。
The experience device consists of host software, specified bandwidth wireless network, digital media adapter, VQM software, subjective video quality evaluation system, etc.
它也被称为网络适配器,其功能是使主机适应网络介质。
It is also called a network adapter. Its function is to adapt the host device to network medium.
冲突屏蔽对主机是完全透明,不要求改变主机的网络适配器。
Collision truncation requires no change to the host network Repeaters, and is completely transparent to hosts.
光学和惯性数据流的融合,并转交主机通过USB串行适配器。
Optical and inertial data streams are fused and transmitted to a host computer via a USB serial adapter.
应用推荐