适用于焊接低碳钢、中碳钢、低合金钢及铸件。
Suitable for welding of low carbon steel, medium carbon steel, low alloy steel and etc.
可焊材料：低碳钢、高强度钢、中碳钢，低合金钢。
Weldable materials: low carbon steel, high-strength steel, medium-carbon steel, low-alloy steel.
微波渗硼的低、中碳钢渗层中没有明显宽度的富碳区。
There isn't an apparent rich carbon zone under boriding layer for low and middle carbon steels in microwave treatment.
传统的中碳钢调质处理滑动叉，工艺复杂、废品率高。
The technology of traditional quenched and tempered medium carbon steel sliding yoke is very complicated and it has high rejection rate too.
实验结果表明，氯离子对黄壤土中碳钢腐蚀影响显著。
It was found that chloride ions obviously affected the corrosion behavior of carbon steel.
适用于碳钢，中碳钢，合金钢，及部分有色金属的焊接。
Suitable for low-carton steel, middle carbon steel, alloy steel and non-ferrous metal welding.
本文为这种新型铣刀冼削中碳钢的铣削力试验研究报告。
This paper is testing study report of machining the Workpiece of medium carbon...
用于受磨损的碳钢、中碳钢、低合金钢机件边面堆焊、修复。
Fsurfacing welding repair the parts of wear out face made by carbon steels, dle carbon steels low-alloy steels.
这就为制定含钒中碳钢加热制度和控冷工艺提供了基本条件。
These special features provide a basic condition for calefaction system and controlled cooling processes of vanadium middle carbon steel.
用于受磨损的碳钢、中碳钢、低合金钢机件边面堆焊、修复。
For surfacing welding or repair the parts of wear out face made by carbon steels, middle carbon steels and low-alloy steels.
根据碳元素的含量，碳素钢可再分为低碳钢、中碳钢和高碳钢。
Of course I know. according to the amount of the carbon content, carbon steels can be divided into low-carbon steel, medium-carbon steel and high — carbon steel.
利用光学显微镜对中碳钢退火孪晶的形态及形成机制进行了研究。
Morphology and forming mechanism of annealing twin in medium carbon steels have been studied with optical microscope.
在小范围内中碳钢和紫铜电偶对的距离远近对电位分布影响不大。
The distance of the galvanic couples is not a key factor influencing potential distribution in small range.
采用金相-硬度法研究了中碳钢（40钢）在加热和冷却时的组织转变。
To adopt the metallography hardness method to study microstructure transformation of medial carbon steel 40 being heated and cooled.
低粘度油性金属切削油，适用于黄铜、青铜、铝、低到中碳钢的普通加工。
Cutting oil for general machining of brass, bronze, aluminium and low to medium carbon steel.
请指出低碳钢、中碳钢和高碳钢的碳含量范围，指出一些它们应用的实例。
Point out the range of carbon content of low-carbon steel, medium-carbon steel and high-carbon steel. Give some examples for their applications.
通过扭转疲劳试验和塑料复型膜技术研究了中碳钢试样的疲劳短裂纹特性。
The initiation stage and short crack behaviour in torsional fatigue of medium carbon steel was investigated by using a replication technique.
扩散氢含量低，低温冲击性能优异，适用于低温钢、中碳钢等压力容器的焊接。
It has low diffusible hydrogen and good low-temperature impact toughness, suitable for welding middle-carbon steel and pressure containers of low-temperature steel.
产品材料：低碳钢、中碳钢、不锈钢、轴承钢、合金钢、易切削钢、铜、铝等。
Material: low carbon steel, carbon steel, stainless steel, bearing steel, alloy steel, free cutting steel, copper and aluminum.
扩散氢含量低，低温冲击性能优异，适用于低温钢、中碳钢等压力容器的焊接。
Used for welding low-alloy and high strength steel with corresponding strength. It has excellent welding technology and cold crack resistance.
堆焊或修复低碳钢、中碳钢及低合金钢磨损表面如车轴、齿轮和搅拌机叶片等。
For surfacing welding or repair the wear out face made by low carbon steels and middle carbon steels, as axle, gear and blade of mixer.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
Metal matrix composite layer reinforced in situ ZrC particles was formed by laser cladding overlapping on the medium carbon steel.
在含硼中碳钢的热压缩变形过程中，应变速率一定时，随着变形温度的升高，真应力下降；
The flow stress decreased as deformation temperature increased and became higher as strain rate rises.
采用激光熔覆搭接技术，在中碳钢基体上制备出原位析出的颗粒增强金属基复合材料表层。
Metal matrix composite layers reinforced by in situ WC particles were formed by laser cladding using pre pasted 1.
臭锁由硬化中碳钢制作而成，其硬度超出450布氏硬度，臭锁的黑白花纹会让人联想到臭鼬。
The SkunkLock is made out of hardened medium-carbon steel that exceeds 450 brinell, and is painted in black and white stripes reminiscent of a skunk.
用实验方法研究了中碳钢两相组织在等通道角挤压过程中的强烈塑性变形行为和组织演化过程。
Severe plastic deforming behavior and microstructure evolution of two phases in medium-carbon steel during equal channel angular pressing (ECAP) were investigated by experimental method.
能制造不锈钢、中碳钢、铝材等各类型抽芯铆钉、自钻螺丝、螺母、来图来样加工生产非标五金件。
To manufacture stainless steel, carbon steel, aluminum and other types of blind rivets, self drilling screws, nuts, plans to sample processing non-standard hardware.
熔敷金属力学性能优良，用于中碳钢和低合金钢重要结构的焊接，如压力容器、桥梁及船舶结构。
The deposited metal has excellent mechanical properties. It is used for welding middle-carbon and low-alloy steel structure, such as pressure containers, bridges, and ship structure.
介绍了碳钢在淡水环境中的腐蚀行为及影响因素。淡水环境中碳钢主要存在电化学腐蚀和微生物腐蚀。
This paper introduced the corrosion behaviors of the carbon steel and the influencing factors in fresh water environment.
利用极化曲线技术、电化学阻抗测试技术等方法，研究了氯离子含量对黄壤土中碳钢腐蚀行为的影响。
The effects of chloride ion on corrosion of carbon steel in yellow soil were studied by using polarization curve technique, electrochemical impedance spectroscopy(EIS).
应用推荐