• 不断地沉思全部时间和整个实体,考虑所有个别的事物对实体来说就像是沧海一粟,对于时间来说就像是螺丝锥的一下转动。

    Constantly contemplate the whole of time and the whole of substance, and consider that all individual things as to substance are a grain of a FIG, and as to time, the turning of a gimlet.

    youdao

  • 多马刀具公司隶属于山特维克集团,擅长制造高质量的圆柄类整体硬质合金和高速钢刀具,例如钻头、丝锥、铣刀、铰刀和螺纹铣刀等。

    Part of the Sandvik Group, Dormer's expertise lies in the manufacture of superior round tools - drills, taps, cutters, reamers and thread milling cutters - in Solid Carbide and HSS.

    youdao

  • 多马刀具公司隶属于山特维克集团,擅长制造高质量的圆柄类整体硬质合金和高速钢刀具,例如钻头、丝锥、铣刀、铰刀和螺纹铣刀等。

    Part of the Sandvik Group, Dormer "s expertise lies in the manufacture of superior round tools - drills, taps, cutters, reamers and thread milling cutters - in Solid Carbide and HSS."

    youdao

  • 给出了丝锥复合镀的工艺流程和工艺配方。

    The process flow and formula of composite plating on taps were presented.

    youdao

  • 分别对比了复合镀前后的丝锥性能和质量。

    The performance and quality of taps before and after composite plating were compared separately.

    youdao

  • 管螺纹丝锥分为平行螺纹和锥度螺纹两种。

    Pipe taps are supplies with PARALLEL threads or with TAPER threads.

    youdao

  • 过度或早期磨损是机用丝锥常见的失效形式。

    The failure of machine taps arises frequently from excessive or premature wear.

    youdao

  • 带扭力保护装置的快换夹头,丝锥由螺丝固定。

    Quick change tapping chucks with adjustable friction clutch tap fixted with screws.

    youdao

  • 结果表明,成品丝锥通过深冷处理可明显提高使用寿命。

    Results indicate that service life of product taps are improved by cryogenic processing.

    youdao

  • 除非买方指定,制造商无需提供辅助连接件用的筒形丝锥。

    Provision of shell tappings for auxiliary connections is not required unless specified by the purchaser.

    youdao

  • 本实用新型涉及一种桥梁预应力锚夹具的夹片制造用丝锥。

    The utility model relates to a screw tap used in the manufacturing of a clip of a bridge prestressing force anchor holder.

    youdao

  • 丝锥通常生产右扣螺纹,如需左扣螺纹应在订货时说明。

    The general taps are right-hand thread. Please specify if some left-hand thread taps are needed.

    youdao

  • 任何筒形丝锥的螺纹应该从表5中选择,且符合表5的要求。

    The thread of any shell tapping shall be selected from and be in accordance with Table5.

    youdao

  • 介绍了快换丝锥夹头的结构、工作原理和主要零件的设计计算。

    The structure and working principle of a screw tap holder is introduced, and the design calculation of its main parts is presented.

    youdao

  • 铝基复合材料内螺纹攻丝属封闭切削,加工难度大,丝锥极易折断。

    It is very difficult to tap inside Aluminum matrix composites. The process is difficult to operate due to its close condition, and the tap is subject to breaking.

    youdao

  • 是指用工具钢、合金钢制造的滚牙(或切牙)丝锥,精度为H4。

    The thread rolling tap is made by tool steel or alloy, the precision is H4.

    youdao

  • 介绍了挤压丝锥的设计方法及CAD系统,说明了开发软件的结构及特点。

    The design process and a CAD system of extrusion taps are introduced.

    youdao

  • 如果螺尖丝锥或者螺旋槽丝锥不能被使用,推荐使用具有较大排屑槽的三槽丝锥。

    If a gun tap or spiral fluted tap cannot be used, a three fluted tap which permits extra chip space, is recommended.

    youdao

  • 本文主要对螺旋槽丝锥的特性及M36螺旋槽丝锥设计中几何参数的研究进行论述。

    This paper mainly analyses the properties of spiral fluted taps and studies how to select geometric parameters of the tap M36 in design.

    youdao

  • 在对挤压丝锥的磨损、破损特征和机理进行研究的基础上,提出了改进挤压丝锥结构的方法。

    The characteristics and mechanism of wear and fracture of the tap have been researched, and a method to improve the structure of cold forming tap was also proposed in this paper.

    youdao

  • 本文利用某引进高精度丝锥自动磨床的应用实例,着重讨论此类系统的特点及设计中的一些问题。

    This paper discussed the chief features and some design problems of this system with respect to practical examples of certain imported high precision tap automatic grinding machine.

    youdao

  • 采用振动挤压攻丝新方法对钛合金材料进行内螺纹加工,螺纹表面硬度高,丝锥损坏现象显著减小。

    Adopting the new method to female thread machining, high hardness of thread can be acquired, and tap broken cases reduce significantly.

    youdao

  • 通过对攻丝切削力和丝锥排屑特点的分析,确定径向力、轴向力和排屑不畅是影响攻丝质量的主要因素。

    Based on the analysis of tapping force system and characteristic of chip removal, it is confirmed that radial force, axial force and jam of chip removal are the main reasons for poor thread quality.

    youdao

  • 我厂具有九十年代世界最先进的高精度螺纹磨床、丝锥磨床、强力沟槽磨床、金刚石砂轮修型机床及螺纹检测设备。

    Our factory has the nineties the world's most advanced high-precision thread grinder, tap grinder, powerful groove grinder, diamond grinding wheel repair machine and thread-based testing equipment.

    youdao

  • 这些传统加工方法存在的问题有:难以克服攻丝过程中的动态载荷,导致丝锥折断、阻塞、磨损等,同时加工质量不高。

    Those traditional method are confronted with several problems: having difficulty with conquering dynamic load in tapping and leading to thread breaking, block, abrasion and low machining quality.

    youdao

  • 优势还体现在当它工作时无须担心丝锥断裂,尤其是在昂贵的工件上工作时,能起到有效的保护作用,同时还可以为你节省很多的时间。

    The advantage is that we work without any risk of breaking taps on particularly expensive work pieces and it saves also a lot of time by simplifying tapping operations.

    youdao

  • 介绍了涂层刀具与未涂层刀具在切削加工中的性能比较及试验研究。主要通过不重磨车刀的耐用度及丝锥的切削力(扭矩)等因素来展开试验分析。

    Performance of the coated tool and non-coated tool in cutting process is analyzed through measuring durability of the indexable insert turning tool and cutting force (torsional moment) of tap.

    youdao

  • 在加工中小直径内螺纹和在难加工材料上攻丝时,普遍存在攻丝扭矩大、螺纹精度低、丝锥易折断、废品率高等问题,而采用低频振动攻丝是解决此问题行之有效的方法。

    When tapping the little diameter in the material of difficult processing, there usually exist a lot of questions such as tapping torsion heavy, thread accuracy low, rejecting rate high.

    youdao

  • 在加工中小直径内螺纹和在难加工材料上攻丝时,普遍存在攻丝扭矩大、螺纹精度低、丝锥易折断、废品率高等问题,而采用低频振动攻丝是解决此问题行之有效的方法。

    When tapping the little diameter in the material of difficult processing, there usually exist a lot of questions such as tapping torsion heavy, thread accuracy low, rejecting rate high.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定