在此基础上还模拟了不同过热度下铸坯的凝固组织。
Otherwise, the solidification structure for different superheat was simulated.
在此形势下，举办这样一场庆典活动有助于重温历史、凝聚共识，加强团结，共铸和平。
Under such a situation, to host the celebrations will help people review history, gather consensus, strengthen solidarity and build peace.
灰口铁--一种铁碳和硅的合金；易于铸造；在铸态下具有很好的压力紧固性。
Gray iron--an alloy of iron carbon and silicon ; easily cast; good pressure tightness in the as-castcondition.
然后重铸并扩展你的梦想，你会发现，你的恐惧在这种情况下很快消失。
Then recast and expand your dream and you may discover that your fears rapidly dissipate as such.
在超薄快速铸轧条件下，板形控制成为实现超薄快速铸轧工艺规程并最终保证产品质量的关键。
In thin gauge high speed roll casting process, flat control is the key technology for realizing the thin gauge high speed roll casting and ensuring the product quality.
贮氢合金，用XRD,TEM及SEM观测了铸态及快淬态的微观结构，测试了合金在铸态及快淬态下的电化学循环稳定性。
The microstructures of the as-cast and quenched alloys were analyzed by XRD, SEM and TEM, and electrochemical cycle stability of the as-cast and quenched alloys were measured.
设计了铝合金铸轧工艺模拟的实验装置，研究了在该试验条件下，铝合金变形组织与工艺参数的关系。
An experimental instrument for simulating the roll-casting process was designed, and the effect of processing parameters on the microstructure of al alloy was studied.
研究了在交变磁场作用下磁场频率变化对7050铝合金小型方坯静态成型铸坯熔体的弯液面、显微组织以及元素分布的影响。
The effect of alternating magnetic field frequency on the meniscus, microstructure and element distribution of the static formed ingots of minitype square billet of 7050 aluminium alloy.
在拉速提高的条件下，必须优化结晶器内流场以适应稳定生产的需要，防止气孔、拉漏等铸坯缺陷的产生。
Fluid flow in the mould must be optimized in order to improve the internal and surface quality of the slabs while increasing the casting speed.
结果表明：此种不经预处理的铸态铅黄铜，在适当条件下具有一定的超塑性。
It is indicated that as-cast leaded brass without pretreatment can present certain superplasticity at proper condition.
实验结果表明，热处理能改善铸态下制得的铝硅基复合材料显微组织形态。
The results have shown that heat treatment can improve the microstructure of the Al-Si base composite manufactured under case condition.
实验采用旋转型电磁搅拌器。在相似条件下，液态金属在电磁搅拌下凝固与不经电磁搅拌凝固的铸态组织进行对比。
An electromagnetic stirrer of the rotation type was employed under similar conditions, the as-cast structure of metals solidified with and without electromagnetic stirring were compared.
在动载三体磨粒磨损条件下，试验研究了冲击载荷的变化对铸态复相耐磨钢动载磨粒磨损特性的影响。
The influence of varying impact energy on wear resistance of dual phase cast steel has been investigated under impact three body abrasion.
赛义德等一批后殖民理论家所致力的就是要解构西方话语霸权，重铸全球化状态下西方与东方的关系。
He and other theorists of post colonialism strive to deconstruct this hegemony to rebuild a new relationship between the East and the West in the context of globalization.
但是当你用铸轻阴影(阴影地图，在这种情况下)，怪异的影子。
But when you use a shadow casting light (shadow maps, in this case), shadows look weird.
基于宝钢板坯连铸试验平台，开展了液压振动下的结晶器摩擦力检测实验研究。
On the Baosteel continuous casting test platform, the mold friction tests with hydraulic oscillation system were carried out.
通过对AZ31镁合金铸棒在不同变形参数下进行一次变形和二次变形，并对其组织演变过程和力学性能进行分析讨论。
The two-stage deformation was processed to AZ31 alloy as cast at different parameter condition, and structure evolution and mechanical property was analyzed.
采用水模实验以及电脑影像技术，对连铸结晶器内钢液弯月面进行了模拟研究，对不同工艺条件下的钢液弯月面进行了数值模拟。
The simulation study for crescent-moon surface of molten steel in mold is conducted with water simulating experiment and computer video according to different process conditions.
在工业生产条件下测量了连续铸管铸铁结晶器中间环面的温度分布。
Temperature distribution of the middle annular face of the mould in continuous casting pipe processing has been measured in industrial production condition.
在工业生产条件下测量了铸坯加热温度分布，工业试验确定了加热炉经济负荷运行区。
By the industrial experiment, the distribution of continuous casting billet preheating temperature is measured, and the economic load range of reheating furnace is established.
利用该程序计算了不同拉速及冷却条件下，铜薄板连铸过程中温度场的分布，并分析了拉速、冷却条件对铸坯温度的影响。
This program was applied to calculate the temperature distribution of copper thin-slab continuous casting with different casting speeds and cooling conditions.
超薄快速铸轧条件下轧制区内温度梯度很大，其轧制压力是温度的强耦合函数。
The temperature gradient is very great in the rolling zone under the ultra thin high speed roll casting condition, and the rolling pressure is strongly coupled function of the temperature.
以粘弹性薄板为模型，应用材料流变学理论及弹性薄板理论，分析计算了连铸板坯在钢水静压力与不均匀温度场作用下所发生的鼓肚变形与应力。
Based on the viscoelastic plate model, rheology theory and elastic thin plate theory, the bulging deformation and stress in continuous cast slabs were analyzed and calculated.
研究了中性冷却水介质中，铸铝-铸铁偶接状态下各自的腐蚀特点。
The galvanic corrosion behavior of cast aluminum-cast iron were studied by means of weight loss, galvanic corrosion and measurement of released gas.
针对石墨砂型铸渗过程，提出了在碳化物析出条件下石墨砂型铸渗过程的温度场、浓度场、固相分数场统一数学模型；
The numerical model of casting carburizing process of graphite sand on the condition of carbide precipitation casting process is shown.
本文根据生产实践经验，讨论了在连铸生产中，要注意直径与厚度相等情况下的圆、方坯结晶器应有不同的锥度。
According to our practical production experience, this paper discussed that during C. C. production, square and round billet mould with the same diameter should have different taper.
分析方坯产生凸台的原因，为改善铸坯质量，减少横梁在热态下的变形位移量，并进行检测、论证。
This paper analyses the reasons of convex side on blooms. For improving the bloom quality, the method to reduce hot strain and displacement of the cross beam has been adopted and tested.
研究了工业连铸双相不锈钢2205在不同温度和应变速率下的热变形过程。
The hot deformation behavior of industrial continuous-casted duplex stainless steel 2205 under different temperature and different strain rate was investigated.
通过检测不同振动参数下，冷态和拉坯时振动系统输出力的变化情况，计算出结晶器与铸坯间摩擦阻力。
By measuring the hydraulic forces of cylinders in cold and hot tests with different oscillation parameters, the friction forces between strand and mold were calculated.
本文以板坯连铸机为研究对象，对液压振动条件下结晶器和铸坯间的瞬态摩擦力进行测试和分析。
Based on a slab caster which is equipped by hydraulic oscillators, the transient friction force between mould and strand shell was measured and analyzed.
应用推荐