然后,介绍了上位机软件设计以及上位机与温度记录仪之间的通信协议设计。
And then, the design of software in PC and communication protocol between PC and temperature logger are introduced.
测试与实际应用结果表明,自动气象站信号模拟器和上位机之间可以可靠、稳定地实现通信。
Tests and practical application results show that the communication between the PC and the automatic weather station signal simulator is reliable and stable and it meets the design requirements.
数控系统与上位机文件列表互操作有两种方法。
There are two methods for listed files in mutual operation between super-computer and NC system.
下位机通过RS232串行口与上位机进行通讯。
Microprocessor communicates with supervisory computer through RS232 serial port.
在上位机应用软件中,预留了对下位机进行扩充的接口。
The upper order computer preserves expandable interface for lower order computers.
监测仪与上位机以及网络构成了一套完整的谐波监测系统。
The complete test monitor system of harmonic is made up of monitor apparatus, PC and network.
信息交互层按照自己制定的协议实现上位机同焊机的通信。
Mutual information layer achieved communication between upper machine and welding machine by custom communication protocol.
目的:开发一款用于多点温湿度监测系统的上位机监测软件。
Objective to develop a monitoring software running on the host computer for the multipoint temperature and humidity monitoring system.
该应用系统是由上位机系统和下位机系统组成的集散控制系统。
The application system consists of upper order computer system and lower order computer system, it is both a concentrating and a dispersing control system.
数据的分析、处理、绘制曲线以及趋势的预测最终由上位机完成。
Data analyzing, processing, curve drawing and tendency forecasting are finished by the upper computer finally.
双向串行通讯功能,上位机可直接管理配方及监控仪表工作状态。
Two-way serial communication function. The computer can manage the prescription and the working state of appearance directly.
该系统由位移测试装置、下位机硬件系统、上位机软件等几部分组成。
The test system is made up of length testing device, hardware system and PC software and so on.
对于使用串行通信和USB上位机的仪器控制系统设计有一定的参考价值。
The experimental result shows that it has some useful reference value for the design of serial communication and USB master-slave system.
系统的主要功能是完成压力数据的采集、处理、存储、上传和上位机通信等。
The main function of the system is pressure data acquisition, data processing, data storage and transfers etc.
上位机与下位机之间既可通过RS485口通讯,也可以通过USB接口通讯。
The host computer and the slave computers can communicate with each other either through the interface RS485 or the interface USB.
采用这种方式既提高了上位机的效率,又增加了系统的稳定性,方便系统的维护。
This method can enhance efficiency of the master unit and raise stability and facilitate maintenance of the whole system.
说明:usbHID上位机程序,可以实现对指定HID设备的识别和数据收发。
USB HID host computer program, you can achieve the specified HID device identification and data transceiver.
本系统主要由上位机(PC)、通讯主机、测控分机、温度、湿度和水分传感器组成。
This system is mainly made up of upper machine (PC), communication machine, detecting and controlling machine, the sensor of temperature, humidity and moisture.
系统软件包括上位机系统软件和下位机系统软件,软件的设计采用结构化模块设计方法。
The system software included upper computer system software and lower computer system software. Method of structural module was adopted in the design of the system software.
设计实现了对电子标签的识别、多组电子标签序列号的循环存储、与上位机的通信等功能。
The design has implemented the functions of RFID identification, multiple RFID serial number of cycle storage, Reader and PC communications, and other functions.
在软件方面重点研究了非接触式IC卡读写过程的实现,读写器与上位机的通讯协议设计。
For the software, it mainly studies the implementation of contact-less IC card read-write course, the design of communication protocol between read-write module and host computer.
上位机和中继单元之间采用串行口通信,中继单元和模块单元之间采用无线网路进行通信。
The master communicates with the relay unit by serial communication interface and the relay unit communicates with module unit by wireless communication network.
最后通过实验证实了上位机软件具有RS232串行通信、数据库管理和故障波形绘制的功能。
The software's functions of RS232 serial communication between data acquisition equipment and computer, management of data-base and drawing of fault wave are validated by experiments.
由此构成的下位机数据采集系统,只有当采集信号有明显变化时,才将相关数据向上位机传送。
In the system, the data acquisition task was done by a lower level computer, and only when the value of a signal was "obviously changed", data transfer was proceeded.
采用双同步CCD技术,结合上位机的数据处理功能,消除了在测量过程中温度对所测长度的影响。
Owing to use of dual synchronous CCD technology and data processing function of PC, effect of temperature to measured length of steel pipe is eliminated.
它能够根据上位机(自动驾驶控制计算机)下达的转向指令控制转向执行机构实现准确的转向功能。
Accurate steering function has been achieved by controlling the steering operator depending on the instructions from the upper computer (that is, the computer for automatic drive control).
介绍上位机与欧姆龙V600系列RFID控制器串行通信连接方式、通信命令和通信数据帧格式。
The communication link way, communication commands and communication data structure between host computer and OMRON V600 Series RFID controller are introduced.
介绍上位机与欧姆龙V600系列RFID控制器串行通信连接方式、通信命令和通信数据帧格式。
The communication link way, communication commands and communication data structure between host computer and OMRON V600 Series RFID controller are introduced.
应用推荐