• 数值计算结果表明,薄片的少子光电导衰退曲线可以用这种解的一次模和二次模之和来表示。

    The numerical results show that the photoconductive decay curve for minority carriers of the wafer can be expressed by the sum of the first mode and the second mode of this solution.

    youdao

  • 本文提出了一种可以证明安全性的身份识别方案,只包含一次模指数运算,其在线计算只需要一次乘法和一次加法。

    There is only one exponent calculation in our scheme and the on-line computing is just a one multiplication together with one addition.

    youdao

  • 当我第一次打开货运包装时,我以为Xilinx给我送来了两个工具包,因为包裹中有两个表面上一模一样的盒子。

    When I first opened the shipping container, I thought Xilinx had sent me two kits, since the package is comprised of two superficially identical glossy boxes.

    youdao

  • 能一次完成纸板1—5色印刷、压线、修边、开槽、切角、打孔、模切等多道工序。

    This machine can fulfill the processes such as paperboard printing (1~5 colors), creasing, edge trimming, slotting, corner cutting, hole punching and die cutting etc in one cycle automatically…

    youdao

  • 介绍了用注塑机改装的注吹一次成型全自动吹瓶机回转模部件结构设计。

    The design of the assembly structure of the revolving mould used on the fully automatic bottle_blowing machine that was reformed from an injection machine was introduced.

    youdao

  • 然后,利用PDMS对所制作的SU-8微流沟道进行一次倒模,得到其负模结构;

    Then, the PDMS was used to cast firstly for the SU-8 microfluidic to obtain a PDMS negative mode structure.

    youdao

  • 全书的页码数字采用模切工艺,利用模切所产生的页码废料形成书籍重要的组成部分,这对书籍本身来说也是一次探索纸张可能性的表达。

    Die cutting is used on the page numbers of the whole book, and the wastes also constitute an important component of the book, which is another expression of what paper can create.

    youdao

  • 隧洞衬砌采用针梁滑模、全断面一次浇筑的方法施工,可以减少工序作业,保证施工质量。

    The tunnel is lined with the method "single placement for the full cross using needle beam sliding form", which can save construction procedures while ensuring quality.

    youdao

  • 该改进设计主要是在定模部分增加型芯,并将一次分型改成二次分型,再使倒锥部分实现强制脱模。

    The improved design is increased in the fixed mold core, which change first parting into second parting and demould the inverted cone mandatorily.

    youdao

  • 针对该冲压件弯曲成形难的问题,设计了双凸模弯曲模,通过双凸模的依次动作可一次成形该零件的复杂形状。

    Aimed at the difficulties in the bending forming of punching parts, the bending die with dual-punch is designed, the complex shape of this part is once formed by the ordinal action of dual-punch.

    youdao

  • 该弯曲模采用浮动模块和复合运动的滑板,使环形零件在压力机一次行程中成形,工作效率高。

    The vertically float die block and slide plate of combination movement have been adopted in the die to form a ring part on a single stroke of the press with high productivity.

    youdao

  • 并采用一次成形的复合复位模结构,既保证了产品的质量,又提高了生产效率,同时降低了生产成本。

    The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production.

    youdao

  • 试制的精密滚子一次试模成功,品质良好,现已投入生产使用。

    The higher precision roller with good quality can be done by means of mold. It has already been put into production.

    youdao

  • 利用该新型叠式模具一次可在同一台注塑机上成型普通单层注塑模具的2倍制品,设计合理、开模可靠、生产效率高、经济性好。

    With the reasonable layout and reliable open movement , the newfashioned hot runner stack mold could effectively and economically get double parts in the same injection machine for production.

    youdao

  • 叙述了玻璃托的零件结构及成形工艺,介绍了落料压凸模、一次弯曲模和二次弯曲模的模具结构及设计要点。

    The structure and stamping technology of glass bracket were elaborated. At the same time, the blanking die, bending die for one time and bending die for two times were also introduced.

    youdao

  • 在最佳变形条件下利用该钢进行精密塑料电话机按键模的超塑成形,可一次成形出精度较高的模具,证明其有较好的应用效果。

    The superplastic forming of the precision plastics telephone key die can be realized in optimum conditions. The results show that the technology has good practical effect.

    youdao

  • 该产品的制作可采用模具糊制、对模冷压一次成型的方法。

    The utility model can be manufactured by adopting the method of one-time forming in mold pasting and cold-molding compression.

    youdao

  • 利用引进的澳大利亚生产的土工模袋,对右侧堤防边坡进行护砌,这是北京市第一次采用模袋砂浆的形式护砌堤防。

    This paper describes how to use Australian geofabric packaged mortar to build revetment wall on the slope of the right bank.

    youdao

  • 介绍了一种复合式连杆切边模,可在压力机一次行程过程中完成连杆的冲孔、切边和整形工序,该模具具有工作效率高、切边质量好等优点。

    Introduced a kind of compound triming die with connecting rods, it could finished the piercing and triming and sizing process in one press, the working efficiency is high, triming quality is good.

    youdao

  • 通过理论分析,概率修正和实验验证,确定出利用柱形凸模、锥形凹模一次拉深锥形件的极限拉深比。

    Through theoretical analysis, probability revisal and experimental test, the limit drawing ratio of a tapered cup drawn by cylinder convex punch and tapered concave die is determined in tis paper.

    youdao

  • 通过理论分析,概率修正和实验验证,确定出利用柱形凸模、锥形凹模一次拉深锥形件的极限拉深比。

    Through theoretical analysis, probability revisal and experimental test, the limit drawing ratio of a tapered cup drawn by cylinder convex punch and tapered concave die is determined in tis paper.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定