When I call this class definition, it calls init, init and I give it an x and a y value.
我说过，当我们，调用这个类的定义的时候，它会去调用。
This x,y value is stored in the textLocs array and is extracted for the respective text annotation line as defined in the data file.
这对x,y值被保存到textLocs数组中并且为数据文件中定义的相应的文本注释行提取它。
Computing Y coordinates involves scaling a value from one range to another.
计算y坐标要将某一个值按比例从一个范围缩放到另一个范围。
So, if element X contains a certain value, a business rule is applied to element Y.
因此，如果元素X包含某个值，业务规则应用于元素y。
The When attribute value of Y means that the command should be executed for each item that evaluates to true.
Y的when属性值表示应当为计算结果为真的每个项目执行该命令。
Notice that you are using the largest number value calculated earlier to label the Y-axis.
注意，要使用前面计算的最大值来标记y轴。
The status of the message is indicated by the value of the SerializerKey variable which is set to Y for a valid message and to N for an invalid message.
消息的状态是由SerializerKey变量的值来表示，“Y”代表有效消息，“N”代表无效消息。
So if x is initialized to "0" before we start, this is effectively the same thing as calculating y&z and storing the value in x.
因此如果在开始前我们就把x初始化成“0”，那么这就象计算 y & z并把值存到 x 里。
If the value is y, the target VM will be suspended until the debugger application connects.
如果值为y，目标VM将暂停，直到调试器应用程序进行连接。
Quickly came assembly language, which abstracted away the ones and zeros to provide rudimentary machine instructions such as load register X with value y.
很快有了汇编语言，它将1和0抽象成基本的机器指令，例如用值y加载寄存器x。
x You measure basically, for various values of x, what the value of y ends up being.
你测量的数据基本上就是一些，和它们相对应的y的值。
Now invoke this method with "5" as the value for parameter x and "5.0" for parameter y.
现在用“5”作为参数x的值来调用此方法。
Notice in the class definition here, is there, this is the first thing that's got called, and I just called with the value for x and the value for y, and it went off and did something for me.
就在这里，这是第一个被调用的东西，我用x的值和y的值调用了它,然后这个方法继续进行，并为了做了一些操作。
So, if we want to set it up instead dx dy, then it means we are going to actually look at the converse question which is, for a given value of y, what is the range of values of x?
如果要用dxdy来替换，就是说,转化为与之相反的问题来看，给定y的一个值，那么x的取值范围是什么呢？
Since y is specified in the output operand section, the updated value in %edx is stored in -8(%ebp), the location of y on stack.
因为y是在输出操作数部分中指定的，所以 %edx中更新的值存储在-8(%ebp)，堆栈上 y 的位置中。
The numbers on the x axis run from 0 to 1; the numbers in the y axis are generated by evaluating the equation for each x value.
x轴的数字范围为 0到1，y 轴的数字是通过将各 x 值代入等式计算得出的。
So, that means that the value of F depends actually on y two different parameters, say,if the variables are x and y, or they can have any names you want.
这意味者F的值取决于,两个不同的参数x和，或者其他名字。
The statement /x/y/* returns all nodes under any node y with the parent x. /x/y[@name='a'] matches all nodes y who have a parent x, and have an attribute called name with the value a.
x/y/*语句返回父节点为 x的任何节点 y下的所有节点。 /x/y[@name='a']匹配所有具有父节点 x且具有名为 name 且值为 a 的属性的节点 y。
So, remember, when we did it first over z, we start by fixing a point, x and y, and for that value of x and y, we look at a small vertical slice and see from where to where we have to go.
要牢记，当我们对z积分时，首先固定一个点，看看它们的值，取一个垂直切片,并找出z的积分限。
The CNot(x,y) operator tests the value of y and if it is "1", it flips the value of x.
CNot(x,y)运算符测试 y的值，如果是“1”，则对 x 的值取反。
The value 2 is still in what we called Y. It's now also in what we called X, but notice inside of main and here's the power.
数值2还是在y中，现在，它也在x中，但注意在main中，这是那个能力。
y 1 two minus one is one, that's my new value of iters left, go back up.
加x等于6，也就是y的新值，y，plus，x，is，six，，that’s，my，new，value，of，y，2减1等于，也就是iters，left的新值，然后再回去做测试。
I am committed to finding an employer who would value my talents in X, y, and Z. I'd love your ideas about companies that might fit that bill.
我在努力找一位重视我在X,Y和Z方面的才华的雇主。我很想听听你对符合条件的公司的看法。
For 4Q10, we estimate revenues of $111.1 million (+13.2% y/y) including advertising revenues of $82.1 million (+30.0% y/y) and Mobile Value Added Serves (MVAS) of $22.9 million (-20.0% y/y).
对于去年第四季度，我们预估收入达到1.111亿美元（比去年增长13.2%）包括8210万美元（比去年增长30%）的广告收入和2290万美元（比去年减少20%）的移动增值服务收入。
self y Notice what I also do here, I create self dot y, give it a value, and then, oh cool, I can also set up what's the radius and angle for this point, by just doing a little bit of work.
我创建了，然后给它赋值，然后，噢太酷了，通过做一点额外的工作,就可以得到点的半径和角度了，好，实际上如果。
For a given value of x, so that's a given slice, I have a range of values for y, that is, from this picture at the left most point on that slice to the rightmost point on that slice.
对于给定的x，对应一个切面，就可以得到一个y的取值范围，从图片上看，是从切面的最左边到最右边。
So I don't know don't, John, I would argue if I'd written this better, I would have had a method that returned the x- and the y- value, and it would be cleaner to go after it that way.
我会去辩论这么写是不是更好，我也可以写一个，返回x坐标和y坐标的方法,这么做可能会更清楚一点，这是很棒的缩写，好。
At times, a real-life data set may not have all the points — there may be an x-value but the corresponding y-value may be missing for the column you are trying to plot.
有时，真实的数据可能没有包含所有的点——对于要绘图的列，可能有x值，但缺少相应的y值。
In the example, the data passes in the form (X-value), (Y-value). For example, [1, 1], [3, 5], [50, 2], and [10, 34].
该例中，数据以(X -value)，(Y - value)的形式传入，比如：[1,1]、[3,5]、[50,2]和[10,34]。
Well, maybe I should actually put this here, y=x y=x OK, and so I will go, for each value of x x I will go from y equals xo to y equals square root of x.
我应该把它放到这里，和y=√x，y，equals，x，to，y，equals，square，root，of，x。,对于每个x，都是会从,积到y=√
应用推荐