X ray Diffraction (XRD) was employed to determine the phases presented in the modified layer.
利用X射线衍射(XRD)分析表面改性层结构的变化。
X ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) are used to analyze the synthesized GaN nanorods.
用X射线衍射(XRD)、扫描电镜(SEM)、高分辨率透射电镜(HRTEM)和光致发光光谱(PL)对生成的产物进行了分析。
The structure and component of coating were analyzed by FTIR spectra, X ray diffraction (XRD) and transmission electron microscopy (TEM).
采用红外光谱、X射线衍射和透射电镜对涂层的组成和结构进行了分析。
The coating composition, microstructure and phases were investigated by energy dispersive X ray analysis (EDXA), X ray diffraction(XRD), scanning electron microscope(SEM)and image analyzer.
运用能谱技术(EDXA)、X射线衍射仪(XRD)、扫描电子显微镜(SEM)和图像分析仪对涂层成分、显微组织、涂层相结构和组成进行了分析。
The principles of X ray diffraction(XRD) and electron backscatter diffraction(EBSD) are introduced, and their applied characteristics described in texture analysis of steel sheet by taking examples.
介绍了X射线衍射(XRD)法和电子背散射衍射(EBSD)法的原理。结合实例阐述了两种方法在钢板织构研究中的应用特点。
Then, the films were characterized with X ray photoelectron spectroscopy(XPS), X ray diffraction(XRD), ultraviolet visible light absorption spectroscopy, and atomic force microscopy(AFM).
用X光电子能谱、X射线衍射、紫外可见吸收光谱、原子力显微镜等手段对制备的薄膜进行了表征。
The Tm- Fe alloy films obtained at room temperature are amorphous by x - ray diffraction (XRD).
射线衍射分析表明:室温下所得合金膜衍射峰是弥散的包峰,所得到的合金膜是非晶态的。
The structure, surface morphology and the optical properties were characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL).
用X 射线衍射(XRD)、扫描电镜(SEM)、荧光光谱(PL)对样品进行结构、形貌和发光特性的分析。
The x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS)and scanning electronic microscopy (SEM)were employed to analyze the structure, composition and surface morphology of the films .
用x射线衍射(XRD)、扫描电镜(SEM)和x光电子能谱(XPS)对样品进行了结构、形貌及组分分析。
X ray diffraction (XRD) analysis reveals that degree of easy axis alignment of HD magnet is lower.
射线衍射测试表明HD磁体易磁化轴的取向度较低。
The resultant surfaces were characterized by means of SEM, transmission electron microscopy (TEM), X-ray diffraction (XRD), and water contact Angle measurements.
用扫描电镜、透射电镜、X射线衍射、接触角测量等技术对表面进行了表征。
The influences of temperature, catalysts and moisture on microcrystallite structure of pyrolysis gasification semicoke were investigated using X-ray diffraction(XRD).
采用X-射线衍射(XRD)法分别考察了温度、催化剂和水分对生物质热解气化半焦微晶结构的影响。
Scanning electron microscope (SEM) and X-ray diffraction (XRD) were used to measure the surface morphology, the crystal microstructure and the distribution of diamond grain in the film.
用扫描电镜(sem)和X射线衍射(XRD)方法检测了复合膜的表面形貌、晶体显微结构和复合膜中金刚石颗粒的分布情况。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
采用X射线衍射(XRD)、透射电子显微镜(TEM)分析手段对样品的物相、结构、形貌进行了表征和分析。
Gel permeation chromatography (GPC), Fourier transform infrared spectrometer (FT-IR), X-ray diffraction (XRD) were adopted to characterize and analyze the degraded products.
用凝胶渗透色谱(GPC)、傅立叶变换红外光谱(FT - IR)和X射线衍射(XRD)对降解产物进行表征分析。
The microstructure? Element distribution and phase after hot-corrosion were analysed by means of X-ray diffraction (XRD) and scanning electron microscope (SEM).
利用X射线衍射(XRD)和扫描电镜(sem)等手段,对高温熔盐热腐蚀后的组织形貌、元素分布及物相进行了分析。
The structural change of PAN based carbon fibre by an electric current pulse was studied by means of X-ray diffraction(XRD) and transmission electron microscopy(TEM).
用X射线衍射(XRD)、透射电子显微镜(TEM)等技术研究了PAN基碳纤维在单电流脉冲作用下的结构变化。
The roasting kinetics of copper sulfide concentrate is investigated with the differential thermal analysis (DTA), thermo-gravimetry (TG) and X-ray diffraction (XRD).
采用DTA ,TG结合X -射线衍射分析,对硫化铜精矿的焙烧的动力学进行了研究。
The thermal decomposition products were characterized by the powder X-ray diffraction (XRD) and transmission electron microscopy (TEM).
运用X -射线粉末衍射(XRD)、透射电镜(TEM)等技术对碱式碳酸铜热重分解产物进行了表征。
The content variation of four kinds of Huainan coal ash mineral under different temperatures was analyzed with X-ray diffraction (XRD).
利用X射线衍射分析四种淮南煤在不同温度下煤灰矿物组成变化。
The obtained samples were characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and thermogravimetric analysis (TGA).
所得样品用扫描电镜(SEM)、傅立叶红外光谱(FT - IR)、X射线衍射(XRD)和热重分析(TG)等分析方法进行了表征。
The samples' structures were characterized by using powder-X-ray diffraction (XRD) and the samples' morphologies were observed with SEM and the adiabatic temperature changes were determined directly.
用粉末X射线衍射表征材料的相组成,用扫描电镜(SEM)观测样品形貌,用直接法测量材料的绝热温变。
The perfect crystalline quality of PS films is verified by X-ray diffraction (XRD) and Raman spectroscopy.
x光衍射分析表明样品具有良好的晶体质量;
The results of X-ray diffraction (XRD) analysis show that it remains a well-layered structure with single phase of hexagonal after composite doping.
射线粉末衍射(XRD)分析表明,复合掺杂没有改变晶体的六方单相层状结构。
The X-ray diffraction(XRD) patterns show that ZAO thin films has a hexagonal wurtzite structure.
在氮气气氛下进行退火处理,X射线衍射(XRD)谱表明ZAO薄膜具有六角纤锌矿的晶体结构。
X-ray diffraction (XRD) and carbon nuclear magnetic resonance spectroscopy (13C-NMR) were adopted to study the structure change of Armos fibers after irradiation.
通过X射线衍射(XRD)和碳核磁共振谱(13C-NMR)研究辐照改性前后芳纶纤维结构的变化。
The powders were characterized by X-ray diffraction (XRD), BET surface areas.
粉末用X射线衍射(XRD)、比表面积(BET)等手段进行了表征。
The microstructure of activation process was analyzed by means of X-ray diffraction (XRD) and nuclear magnetic resonance (NMR) etc.
通过X射线衍射(XRD)和核磁共振(NMR)等测试方法对其活化过程的微观结构进行了分析。
The structure and composition of samples were analysed by Rutherford backscattering spectroscopy (RBS), X-ray diffraction (XRD) and Raman spectra.
用卢瑟福背散射、X 射线衍射和喇曼光谱法分析样品的成份及结构。
The synthesized zeolites were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM).
分别采用X射线衍射(XRD)和扫描电子显微镜(SEM)对样品进行了表征。
应用推荐