The castings after optimizing passed the X-Ray test and dissection inspection.
通过对铸件进行X射线探伤和解剖证实模拟结果是准确的。
The welded joints were completed by the X-ray test, mechanical properties tests and metallographic analysis.
焊后对焊接接头进行了射线检测、力学性能测试、接头金相组织分析。
X-ray test found that the grafted membranes show a decrease in crystallinity depending on the grafting yield.
射线衍射测试表明，接枝膜结晶度随接枝率的升高而降低。
Through dye check, X-ray test, and metallographic examination, quite a lot of cracks were found in the welds of a deaerator storage tank at the cogeneration plant of Shanghai Petrochemical Works.
上海石化总厂热电厂除氧器水箱，经着色探伤、x射线探伤、金相检验等方法检测后，发现焊缝有大量裂纹。
Right now, the test involves lying on your back while the arm of a special X-ray device moves over your body to measure the thickness of various bones.
现在，这项检测需要你躺下，同时一个特别的如手臂一样的X光射线装置来回在你身体上移动来检测不同部位骨头的厚度。
After giving my patient painkillers, I took him to the X-ray room for a test called an intravenous urogram.
给病人吃了止痛药后，我带他去拍X光做静脉尿路造影检查。
A type of X-ray called spiral computed tomography or CT can find lung cancer early, but it is expensive and also finds non-cancerous lesions that are expensive and risky to test.
一种立体计算机体层扫描能够发现早期肺癌，但费用昂贵，并能发现一些检测昂贵、有风险的非肿瘤病变。
Least squares polynomial smoothing was constantly used in X ray diffraction test.
射线衍射线常用多项式拟合移动平滑方法进行处理。
The paper studies the chemical and mineralogical compositions, the technological and physical properties of tripoli by means of chemical analysis. X - ray diffraction and technological test.
借助于化学分析、X射线衍射分析、工艺性能试验等方法，对粉石英的化学成分、矿物成分、工艺物理性质进行了研究。
The evaluation on the X - ray inspection technology and test results for the composite coaling thick - wall solid charge is described in the paper.
介绍复合包敷层厚壁固体药柱的X射线检验透照工艺的设计和检测结果的评价。
The bend Angle of the flyer plate was determined by flash X-ray photography during explosive welding and the value coincides with that obtained in the semicylinder test.
通过爆炸焊接过程的闪光X射线摄影，测得了飞板弯折角。其数值与半圆柱试验测得的飞板弯折角基本上相一致。
The reasons of high disintegration index of Meishan iron ore sinters are studied by storage and shatter test, as well as microprobe, X-ray and differential thermal analysis.
对梅山烧结矿粉碎率高的原因进行了剖析，研究中采用了贮存和落下试验、显微分析、X -射线分析、差热分析等。
This article mainly introduces applications of X - ray technology in the fields of hybrid integrated circuit failure analysis, DPA, and screening test.
本文主要介绍X射线透视技术在混合集成电路的失效分析、DPA以及筛选领域中的应用。
Maybe there was another X ray or test my doctor needed before I could be released.
或许在我出院之前，我的大夫还需要为我照一次X光片或做其他检查。
Result for X-ray diffractometer test indicates that no oxidization occurred during the spraying process.
射线衍射分析结果表明冷喷涂过程中，无氧化现象发生。
The importance of X-ray inspection, withstanding voltage test and voltage drop control were emphasized.
强调了X射线检查、耐电压检测、电压差管理等在质量管理上的重要性。
The NOF says a test called Dual-energy X-ray absorptiometry, or DXA, is the best test for osteoporosis. DXA uses radiation from x-rays.
国家骨质疏松基金会说，一种叫作双重能量X 射线吸光测定法，或是DXA是用来诊断骨质疏松症的最佳途径。
The phase compositions and characteristics of glass-ceramics products were determined by the comprehensive methods such as optical microscopy, X-ray diffraction, physical and chemical properties test.
通过光学显微分析、X射线衍射分析、物理化学性能测试等手段确定了微晶玻璃的物相组成及性能特征。
The copolymers were characterized by IR, DSC, TG, X-ray and solubility test in common solvents.
用红外光谱、X -射线衍射、差热分析、热失重和溶解性试验对共聚物进行了表征。
Through the X-ray diffraction analysis and point loading strength test, intrinsic causes for the rockburst in some sandy mudstones in Erlang mountain highway tunnel has been ascertained.
通过X射线粉晶衍射成分分析，结合岩石点荷载强度试验研究，查明国内外首次发现的此隧道部分砂质泥岩发生岩爆活动的内在原因。
The changes of the electric match composition at different time simulating accelerated life test were analysed by X-ray diffraction.
采用X -射线衍射实验，分析了电点火头在非密封加速寿命试验后各个时间点上药剂组分的变化情况。
The X-ray diffraction was used to determine the structure of the coating surface. At last, the shock abrasive wear test was performed.
用X射线衍射分析方法测定了镀层表面结构并作了冲击磨料磨损试验。
Various properties of the raw drug Horsc Bozoar were studied by microscopic observation, X-ray phase analysis, thermal analysis, elementary analysis and solubility test.
对马宝进行了性状观察、显微观察、X射线物相分析、热分析、元素分析及溶解试验。
The microstructure and hardness of the layer of H13 tool steel gas-nitrided in different heat treatment conditions were studied by X-ray, SEM and micro-hardness test.
采用X射线衍射、扫描电镜及显微硬度等技术，综合比较和分析了H13模具钢在不同热处理状态下经相同气体渗氮处理后表层的组织结构和硬度。
Methods According to the questionnaire, the test of PPD (purified protein derivative), X-ray checking and sputum bacteria culture method had been used.
方法应用PPD试验、X线透视、痰菌培养等方法开展现况调查。
Properties of the Zn-Ni alloy deposit were determined with the methods of X-ray diffraction analysis, microhardness and salt -spray test.
采用X—射线衍射分析法、显微硬度测试法和盐雾试验法来检测镀层性能。
The characteristics of the films have been investigated by scanning electron microscopy(SEM), EDS, X-ray photoelectron spectroscopy(XPS), and the adhesion of films were tested by tension test.
用扫描电镜（SEM）、能谱仪、XPS对薄膜表征，用引拉法测定了薄膜的附着强度。
Pressure Vessels used Special steel products production, And the X-ray flaw detection with advanced high-pressure test.
压力容器采用特种钢制作，并经先进的X光探伤与高压测试。
Methods Using CT performance phantom, dose phantom and X-ray dose survey meter to test all specifications of CT performance that were demanded by the state regulations.
方法使用性能检测模型、剂量模型、剂量仪，按照卫生部规范对CT性能指标逐项检测分析。
In addition, the surface properties of modified carbon fibers were characterized by X-ray photoelectron spectroscopy (XPS) and single fiber contact Angle test.
针对改性处理后的碳纤维的表面性能，进行X射线光电子能谱和单纤维接触角测试。
应用推荐