The round workpieces are picked up by a vacuum gripper, transported a short way and set down on a small carrier, which conveys the parts back to the starting point.
圆形工件由真空夹持器拾起，运送一小段距离后放置在小型运载装置上，最终工件被运送回原点。
Strong erosion: the metal workpieces dip in with high and certain temperature erosion of solution, to remove metal workpieces surface oxides and corrosion things process.
强浸蚀：将金属制件浸在较高浓度和一定温度的浸蚀溶液中，以除去金属制件表面上氧化物和锈蚀物的过程。
A new apparatus and method allows for the production of thinner workpieces that at the same time remain strong.
新的装置和方法允许生产更薄的、同时保持强固的工件。
A variation from this type is planetary internal grinding, which is recommended for heavy workpieces that cannot be held in chucks.
这种方法的一个变体是行星式内表面磨削，当工件较重不能用卡盘固定时推荐使用。
It is a new type of manufacturing system which can manufacture various workpieces by reconfiguring manufacturing cells and equipments.
可重构制造系统是一种新型的制造系统，主要通过制造单元重构和设备重构来满足变品种的工件加工要求。
These workpieces must be finished on a grinder.
这些工件必须在磨床上精加工。
The workpieces are loaded automatically into the machine.
工件是自动加载入机器的。
The present invention provides a system for use in processing semiconductor workpieces.
本发明提供一种用于加工半导体工件的系统。
The current should be adjusted as per different workpieces and technological requirements.
应根据不同的工件及工艺要求来调节电流大小。
Recommended Applications: PDC, ceramics, stone and other workpieces grinding and polishing.
适用范围： 适用于聚晶复合片烧结体、陶瓷、石材等工件的研磨抛光。
The design scheme of clamping and locating in machining large-sized workpieces is put forward.
提出了大型机加工件的装夹及定位设计方案。
The present invention provides for single workpiece thinning or thinning a batch of workpieces.
本发明可为单个工件的减薄而提供或用于减薄成批的工件。
There are many scrapped products or raw materials caused by the quench cracks of metal workpieces.
金属材料工件因淬火裂纹造成产品或原材料报废的实例很多。
Reference data of sand belt speed for sand belt grinding of different materials workpieces are provided.
提供了不同材料工件用砂带磨光时砂带速度的参考数据。
Vibration technology is used to strengthen and polish workpieces with complicated strange curved surfaces.
振动强化、抛光技术用于对复杂异型曲面工件进行表面强化、抛光处理。
The welding process of the welding workpieces, uneven heating process is partial and uneven cooling process.
焊接过程对被焊工件来说，是局部的不均匀加热过程和不均匀冷却过程。
The machine is equipped with a hydraulic switch valve to ensure safety during loading and unloading workpieces.
工作台起动有液压开关阀，确保装卸工件时的安全性。
The welding technology used for preheating flash butt welding was evaluated for workpieces with large welding section.
针对大截面工件的闪光对焊工艺特点，确定了预热闪光焊的焊接工艺。
A method of remanufacturing workpieces measurement and reconstruction based on structured light stereovision is proposed.
提出了一种基于结构光三维视觉的再制造工件测量及重建方法。
The thermal states of the steel workpieces heated in a reheating furnace are used to optimize the control of the furnace.
主要讨论如何基于工件(钢锭、钢坯等)的热状态来进行均热炉的优化控制。
While holding component parts by fixtures the machining errors will be engendered on workpieces owing to a lot of reasons.
用夹具装夹工件进行机械加工时，由于诸多原因，会使工件产生加工误差。
This method is used for turning very long workpieces, when the length is larger than the whole stroke of the compound rest.
这种方法用于车削很长的工件，其长度大于复式刀架的整个行程。
It can be used for measuring dynamic balance and spindle rotating accuracy of machine tools, and cylindricity of workpieces.
它可测量机床的动平衡，也可测量机床主轴的回转精度、工件圆度等。
Puller , a tool used to unload the bearings set in the bearing bore, can unload bearings and workpieces mounted on the shaft.
拔卸器，这是一种对设置于机具内孔处的轴承进行取卸用的工具，可卸下镶在轴上的轴承或工件。
To the scanning measurement of other complicated workpieces with space curved surface, it has very important referenced value.
本课题的研究对于空间曲面的复杂工件的扫描测量具有重要的参考价值。
The principle of an imaging sensor used for on line measurement of workpieces produced by high speed hot forming is presented.
介绍图像传感器对快速热成型工件的外径在线检测原理。
It is suitable for the grinding of cutting tools and workpieces of hard alloy and non-ferrous metal and non-metal materials etc.
适用于硬质合金刀具，工件及有色金属，非金属等的磨削。
This paper explains in details the ablution technology of penetration inspection for workpieces of canned motors and its noticing items.
较详细地介绍了屏蔽电动机工件渗透探伤清洗技术及其注意事项。
The principle of a CCD sensor used for on-line measurement of workpieces produced by high speed hot forming was presented in this paper.
本文介绍了CCD传感器对快速热成型工件的外径在线检测原理。
The geometrical information definition of workpieces is a bridge connecting digital design to manufacturing for aircraft sheet metal parts.
飞机钣金零件成形工件几何信息的定义是其数字化设计与制造的桥梁。
应用推荐