Work on designs for the new turbine blades and sites are well advanced at the University of Southampton's sustainable energy research group.
南安普顿大学的可持续能源研究小组在设计新型涡轮叶片和选址方面进展良好。
"The problem is that right now nobody can reach the turbine houses where key electrical work must be done," Nishiyama said.
“问题在于现在人没法到达涡轮机房，而关键的电力工作又必须在那里面才能完成，”Nishiyama说。
When the magnesium is mixed with water, it produces heat, boiling the water to produce steam, which can then drive a turbine and do useful work.
当镁与水混合在一起时，它就会产生热量，让水沸腾产生蒸汽，而产生的蒸汽然后就可以驱动涡轮机，而且也可用来做些有用的工作。
"In the last year, renewables work has started to come through," he says, naming several wave and tidal turbine-makers he has won contracts from.
“去年开始，可再生能源工程开始重建”，他说。同时提到几个与他签订合同的海浪与潮汐涡轮机制造商。
This is the turbine to compressor mechanical advantage mentioned earlier that is employed in jet engines and is key to making them work!
这是机械的优势，以压缩机刚才是受雇于喷气发动机，关键是使他们的工作涡轮！
Turbine starter is a very important composing part for aero-engine, its work capability directly affects the reliability of aero-engine in start.
涡轮起动机是航空发动机的重要组成部分，其工作性能直接影响发动机的起动可靠性。
The measurement accuracy and work efficiency are greatly improved by turbine blade natural frequency measurement system based on industrial PC.
基于PC机的汽轮机叶片静态频率测量系统可大大提高测量的精确度和工作效率。
Aero engine turbine rotor design is a repeated process that needs much time. There is much work to do to adjust the structural size.
航空发动机涡轮转子设计是一个反复协调的过程，其中存在着大量结构尺寸的调整工作。
It is the characteristic of a Wells turbine to work in alternating air flow.
威尔斯透平的特征是能工作于交变气流中。
Second LP saturated steam produced by flashing (dilation) runs into double-inlet turbine to make it work, it may increase the efficiency of generator unit.
闪蒸(扩容)产生的低压二次蒸汽进入双进汽蒸汽轮机做功，可提高整体机组的发电效率。
The paper introduces the helium turbine which used in helium refrigerator of space environment simulator, including its design, setting-to-work test and its characteristics.
文章介绍了载人航天空间环境模拟器气氦制冷系统中氦气透平膨胀机的设计、制造、调试等过程，并说明了它具备的特点。
A new type of compressed air energy-storage system is proposed, under which compressed air directly expands in an air turbine to do work and generate electricity, produce heat and cooling energy.
提出一个将压缩空气直接在空气透平中膨胀做功发电，并产出热量和冷量的新压缩空气蓄能方法。
The big blast turbine, generates greater air flow, and improve work efficiency.
大鼓风涡轮，产生更大空气流量，有效提高工作效率。
The turbine will operate at high temperature and high rotational speed, its pump will work under the conditions of lower or normal temperature, high pressure and high rotational speed.
涡轮在高温、高转速下工作，泵在低温或常温、高压、高转速下工作。
The work consisted of throwing up embankments and installing water turbine pumps.
这项工作包括快速建起堤坝和安装涡轮水泵。
It is applicable to rotating and stationary components that work in the harsh environment, such as the combustion chamber, turbine blades, turbine guide vanes, etc.
适用于旋转件和静止件，在恶劣环境中工作的部件，如燃烧室，涡轮叶片，导向叶片等。
A general outline of reliability work in steam turbine development and production is itemized, including 5 topics concerning general requirements and 18 detailed ones.
介绍了电站汽轮机研制和生产过程的可靠性通用大纲，内容包括可靠性工作的5项总要求和18项详细要求。
Based on the whole successful practices, the prospect of establishing new technique system in turbine design and studying work with modern techniques, such as CFD, has been presented.
在总结上述成功实践的基础上，展望了基于CFD等先进技术在汽轮机行业建立新技术体系的前景。
The flow chart of optimizing ASP climb track is designed by adjusting some parameters of Euler angle, attack angle, turbine and rocket-ramjet combined cycle work models, etc.
以涡轮和火箭冲压组合动力的工作模式以及飞行器飞行航迹角、迎角等为调参量，构造空天飞行器爬升轨迹优化流程。
Other turbines work the same way, but the turbine is on a vertical axis and the blades look like a giant egg beater.
其它的风力发电机也是同样的原理，只是涡轮出于垂直线上而叶片像巨大的鸡蛋搅拌器。
In addition, Weihl said Google has engaged in R&D work on reflector mirrors and that the company is also considering conducting R&D into receiver and turbine technology.
此外，Weihl说，谷歌已经在从事研发工作的反射镜和该公司也在考虑进行到接收器和涡轮技术研发。
Through the computer to control the motor to the work of the spring production equipment, the market is mainly divided into convex and non convex turbine.
通过电脑来控制电机从而进行加工工作的弹簧生产设备，现在的市场上面主要分为凸轮机和无凸轮机。
The power system stabilizer (PSS) on water turbine does not work normally because of the influence of interference signals.
水电机组加装电力系统稳定器p SS，经常受到干扰信号影响而无法正常投运。
The industry steam turbine have a good efficiency and steady work is very important for the factory in safe producing.
工业透平的高效、平稳运转对保证大型化肥厂的安全生产起着举足轻重的作用。
The complexity of unit dynamic character is one of the difficult problems in the research work on the boiler-turbine coordinated control system.
单元机组动态特性复杂，是机炉协调控制系统研究工作中的难点问题之一。
The work in this paper can provide useful information for isothermal forging process of P/M superalloy turbine disk.
本文的研究结果为实现粉末高温合金盘件超塑性等温锻造奠定了基础。
The technology of designing the stock of blade forgings is the key in forge work. So there are many differences between turbine blade and other parts in this technology.
锻件的余量加放技术是锻造加工的关键技术，叶片锻件的余量加放技术与其它零件有着很大的差异。
For matching turbine work condition, designed a diffuser that transformed square to round, chose Central Line and shape changed method, defined diffuser expanding Angle.
给出了一种亚音速方转圆扩压器的设计方法，并对中心线形状、型面变化规律和扩张角等进行了选择和说明。
Through analyzing work principle of the wind turbine, a new technique is proposed which USES a method of jet at the blade-tip of wind turbine to enhance the efficiency of wind turbine.
通过对风力机工作原理的分析，提出了一种利用叶尖喷气的方法来提高风力机效率的新型技术。
Through analyzing work principle of the wind turbine, a new technique is proposed which USES a method of jet at the blade-tip of wind turbine to enhance the efficiency of wind turbine.
通过对风力机工作原理的分析，提出了一种利用叶尖喷气的方法来提高风力机效率的新型技术。
应用推荐