We also study the slot CBN emery wheel, which is a special work electrode required by the technique, and explains its principle for in-process dressing.
主要针对装置中实验研究所需的特殊工作电极——开槽CBN砂轮，论述其在新方法中在线修整的原理及其优越性，并进行了研究设计和分析选择。
The invention is concerned with the work electrode structure of the tincture sensitize solar battery, belongs to the technique field of the supporting body.
本发明提供一种染料敏化太阳能电池工作电极结构，属于染料敏化太 阳能电池技术领域。
This article introduces the work principle of untouched electrode method exploration, wave of transmit signal needed in exploration and circuit that generate transmit signal.
本文介绍了不接触电极法测量的工作原理，测量中所需的发射信号的波形以及产生发射信号的电路。
This welding process joints work pieces by melting the electrode and the base metal with the heat from the electric arc between the electrode and the work piece.
它是一种利用焊条与工件之间电弧产生的热量熔化焊条和母材而将被焊工件连接起来的焊接方法。
In this article, we have been designed a kind of electrode change device for distributed high density resistivity instrument and provided its theory and work flow and its circuit diagram.
在文中设计了一种应用于分布式高密度电阻率仪的电极转换装置，介绍了该装置的工作原理、工作流程，给出了详细的电路原理图。
Batteries work by allowing electrons to pass from one electrode to another.
电池的工作原理无非就是让电子从一个电极流向另一个电极。
Combination electrode in both the plus and minus pole can stably work, have smaller electric resistance, good conduct ability and strong the anti-decays ability.
组合电极在正负极都能比较稳定工作，自身电阻较小，导电能力好，抗腐蚀能力强。
Aim at far infrared self-controlled electrode dry oven, which has more difficulty in maintenance, this paper introduces its structure and work principle.
针对维修难度较大的自控远红外焊条烘干箱，简单介绍了其结构和工作原理。
The present work reports the electrochemical behavior of noradrenaline at a bilayer lipid membrane modified glassy carbon electrode.
报道了去甲肾上腺素在双层类脂膜修饰玻碳电极上的电化学行为。
The method is to inject tungsten into the work end face of the spot welding electrode to improve the performance of the electro de.
采用离子注入钨方法在点焊电极工作端面注入钨以改善电极性能。
The key technologies, the whole makeup, the motion between electrode and workpiece at three coordinates, precise orientation of electrode and cycle system of work liquid are emphatically studied.
该技术方案以小型电火花机床的主轴头和电源控制柜为基础，重点研究了总体结构、电极与工件之间的三坐标移动、电极精确定位、工作液循环系统等关键技术。
The influence of the main working parameters, such as electrode material, polarity, work fluid, pulse duration, peak current, is analyzed by experiments to obtain the microelectrode fabrication law.
运用试验研究详尽分析了各主要加工参数，如电极材料、加工极性、工作液介质、放电持续时间和峰值电流等对微细电极的成形影响，得出了微细电极瞬时成形的基本规律。
In this paper, the effect of cold-work and heat treatment on the properties of Copper-Chromium-Zirconium electrode alloy is dealt with, its optimum processing parameters established.
本文研究了热处理和冷变形对铜铬锆电极合金性能的影响，并确定了电极合金的工艺最佳参数。
The work performed and results obtained are summarized as follows:This paper reports design of neutral carrier for solvent polymeric membrane iodide electrode with high sensitivity and selectivity.
论文详细研究了高灵敏度高选择性碘离子电极中性载体（金属配合物）分子的设计。
Therefore, any changes in the cell are ascribable to the work in g electrode.
因此，电池中的任何变化，都归因于工作电极。
Fixed worktable can carry large work piece and keep high precision with moving electrode.
工作台为固定式可承载大型工件，能保持高精密度，由电极(机头)移位加工。
The effect of span between two cores of lime-titania type carbon-steel electrode was investigated using the method of overlay welding on the plate work-piece and high speed camera system.
采用平板堆焊的方法及高速摄像系统，研究了双电极钛钙型碳钢焊条的焊芯间距对焊接工艺和电弧形态的影响。
The steel core wire, as we know, conducts electrical current from the electrode holder to the work.
钢铁核心线，我们知道，进行电流从电极持有人的工作。
By the above work, some technologic innovation results are attend as follows: in zinc electrochemical deposition, electrode voltage's upper time may be shorter by altering cold electrolyte.
通过以上的研究工作，本论文得到以下具有创新性的研究成果：在电沉积制备活性锌粉时，通过冷却电解液的更换可以有效缩短电沉积开始时槽压上升的时间。
To strike an the arc, electron emission and ionization of the gas is initiated by withdrawing the electrode from the work surface in a con trolled manner, or with the aid of an initiating arc.
钨极氩弧焊是通过工件表面和电极之间气体的电离和电子的发射来引弧的。
Another set of brushes slightly tapers the work end of the electrode to expose the end of the steel core wire.
另一套刷稍微蜡烛工作结束电极揭露结束钢芯线。
By using the high-k TiTaO dielectric an1d the high work-function ir electrode, we have exhibited a high performance MIM capacitor that meets the ITRS roadmap requirements for analog capacitors.
借由使用高介电常数介电质和高功函数的铱电极，我们达成满足国际半导体技术蓝图所需求性能的高性能金属-绝缘体-金属电容。
The work also demonstrates a possible way to obtain a single crystal micro-electrode which c0uld be valuable for various purposes.
同非现场测量进行比较，演示一种制备单晶微电极的可行方法。
The work also demonstrates a possible way to obtain a single crystal micro-electrode which c0uld be valuable for various purposes.
同非现场测量进行比较，演示一种制备单晶微电极的可行方法。
应用推荐