Working in his lab's basement, Rosen built his MRI from copper wire and sheets of aluminum.
Rosen在他的实验室地下间用铜线和铝片DIY了他自己的MRI。
The equipment should be placed on the ground without violent vibration or on the working stage and connected in the power grid of 380v with three phase and four wire.
设备应放置在无剧烈振动的地面或工作台上，接入三相四线380v的电网。
Copper flat wire strengthening equipment was introduced in this paper, including its working principles, the mechanism structure and the control system composed of computer and PLC.
设计了一种强化铜扁线的设备，包括其工作原理、机械结构和以计算机与P LC为核心的控制系统。
Feasibility of a kind of guiding datum line of linear motion in large distance using strained wire is analyzed. The working principle of the system is presented.
对以张力金属丝作为大长度直线运动导引基准的可行性进行了分析，给出了系统的工作原理。
Proposes a working model of OCS wire overloading in factory, which may be applied in the construction of overhead electric line instead of the working model in field.
本文提出一种接触网导线工厂化超拉的工作模型，可以作为现场超拉工作模型的替代方案，应用在接触网工程等架空输电线路的施工中。
Work period of current is big, copper wire high temperature (550 degrees), if the working section has air exist, copper and oxygen in heating conditions produce copper oxide.
工作段电流大，铜线温度高(550度左右)，如果工作段内有空气存在，铜和氧气在加热的条件下就产生氧化铜。
The composition and working principle of an underwater wire saw tensile force detecting system was introduced.
介绍了水下绳锯机串珠绳张力检测装置组成和工作原理。
Cold working dies of superior machinability for general use; for large product quenching or wire electronic discharge machining.
切削性优异的通用冷作模具钢。注意大型加工品的淬火及钢丝电火花加工。
The wire drawing with electro plastic effect is a new working process, in which pulse current is introduced into the common wire drawing process.
电塑性拔丝是指在普通拔丝工艺过程中引入高能脉冲电流对工件进行电刺激的新型加工方法。
The Paper introduces the characteristics, composition and working principle of the intelligent detector of steel wire for mine use.
介绍了矿用钢丝绳张力智能检测仪的性能特点及组成部分和工作原理。
The working principle of sensor based on hot wire is described.
介绍了热线式传感器的工作原理。
The quantity of heat is related to working voltage, the length of core wire and cable.
JMI加热电缆发热量与工作电压、发热芯线和电缆长度有关。
The paper introduced the working principle of the lead hardening temperature measuring and control system for the steel wire base on the fuzzy suitable PID control.
阐述了基于模糊自适应PID控制的钢丝绳用钢丝铅浴淬火温度测控系统的工作原理。
A stable, reliable push-pull pulsed wire feeder and its working Principle are introduced. Effective factors of wire-feed stability is also analyzed in this paper.
本文介绍了一种送丝性能稳定、可靠的推拉脉动送丝机及其工作原理，分析了送丝稳定性的影响因素。
When working with WRS-05 wire feeder, fully automatic lead press or computerized wire cutters of any model allows no drag on the host when conducting synchronized wire tending.
任何型式之全自动端子压著机或电脑裁线机，搭配WRS - 05送线机后，能使配合之主机打线无阻力，并同步送线。
However, the coal-mining communications are still so outdated that only wire telephone can be used far from the working place.
但目前的煤矿通信系统却非常落后，仅能在作业面外进行相对简单的有线通信。
Introduce the design of a cold-bending machine forming craft and working process of cutting for wire slot products.
介绍了护线槽产品的冷弯机械成形工艺的设计及切断的工作过程。
A frequency measuring system which is designed in accordance with the working principle of a vibrating-wire sensor is mainly composed with a portable frequency measuring device and a PC.
根据振弦式传感器工作原理而设计的测频系统主要由手持式测频仪和PC计算机组成。
The working conditions and requests of the roll used in high-speed wire pre -finishing mill are introduced.
介绍了高线须精轧机使用的轧辊（辊环）的工作条件和要求。
The feasibility of taking strained-wire as navigating datum line of dummy guide-way was analyzed in laser length measurement system, and working principle of the system was presented.
对以张力金属丝作为激光测长系统虚拟导轨导航基准的可行性进行了分析，给出了系统的工作原理。
Through combined bolting with wire meshes, beam and cable anchor applied in large section roadway, this paper introduces how to select support parameter, working craft and support result.
通过锚、网、索组合支护在大断面煤巷中的应用，介绍了其支护参数的选择、施工工艺及支护效果。
The stress characteristic of the main working methods for processing the special-shaped wire, such as drawing, driven roller die and rolling was analyzed.
针对异型材的几种常用加工方法，如拉伸、辊拉、轧制等，分析它们在加工中的应力特点。
Our crimped wire mesh machine may complete a series of working procedures from mesh rolling to weaving automatically.
我厂生产的轧花网机可自动完成从轧丝到织网成型一系列工序。
The calculation formula of torsion moment of multi-strands wire rope as loaded are deducted by internal force analysis of single-strand wire rope and multi-strands wire rope while working.
对普通单层股钢丝绳和多股钢丝绳工作时内部受力进行分析，推导出多股钢丝绳加载时扭转力矩的计算公式。
The best general working rate that Nb-1Zr wire was recrystallized completely was about 82% at a given annealing temperature.
试验结果表明，在一定的温度下，铌锆合金丝材达到完全再结晶的最佳总加工率在82%附近。
The best general working rate that Nb-1Zr wire was recrystallized completely was about 82% at a given annealing temperature.
试验结果表明，在一定的温度下，铌锆合金丝材达到完全再结晶的最佳总加工率在82%附近。
应用推荐