Seismic while drilling is a new wellbore seismic technology.
随钻地震技术是一种新的井中地震技术。
Actual Barite consumption will depend on hole condition while drilling.
实际的重晶石用量取决于井下的实际需要。
Well control is the control of formation pressure encountered while drilling Wells.
井控是对油气井压力控制的简称。
The term jig should be used only for devices employed while drilling, reaming, or tapping holes.
钻模这个术语只用在服务于钻孔、铰孔或攻丝的装置上。
At a mine in Utah, rescuers may have missed their mark while drilling to reach 6 trapped miners.
在犹他州矿难中，救援人员可能丢失了他们所要抵达营救6名被埋矿工的具体方位。
Formation pressure detection while drilling is one of major means to realize optimizing drilling.
随钻地层压力检测是实现优化钻井的主要手段之一。
At a mine in Utah, rescuers may have missed their mark while drilling to reach six trapped miners.
犹他州的一所矿井营救人员正在向六名被困的矿工地点进行钻探，但可能失去了他们的踪迹。
More and more horizontal Wells are applied while drilling technology is becoming perfect gradually.
随着钻井技术的逐步完善，水平井的应用越来越广泛。
Developing logging while drilling technology is a major concern direction for oilfield service company.
大力发展随钻测井技术是油田技术服务公司的一个主要关注方向。
A simple and practical algorithm is offered to the electromagnetic measurement while drilling (EM-MWD).
它将为电磁随钻测量的工程问题提供一种简单实用的算法。
The environmental factor correction of logging curves while drilling mainly USES chart correction method.
对随钻测井曲线进行环境影响校正主要使用图版法。
The drilling engineering parameter was designed while drilling data acquisition system based on DSP technology.
设计了一种基于DSP技术的钻井工程参数随钻数据采集系统。
The thesis introduced the most advanced development of MRILWD (Magnetic Resonance Imaging Logging While Drilling).
本文阐述了核磁共振随钻测井(MRILWD)技术的最新进展。
A method for analyzing electrical excitation mode of electromagnetic measurement while drilling (EM-MWD) is proposed.
本文提出一种电磁随钻测量的电激励模式的分析方法。
The storage unit of measurement while drilling system is one of the important parts of rotary steerable drilling tool.
井下随钻测量系统的存储单元是调制式旋转导向钻井系统的关键技术之一。
This paper introduces mainly basic principles, drawing method and applied effects of the distance-diagram while drilling.
文中主要介绍了随钻距离图的基本原理、绘制方法和应用结果。
This prediction method can be used as one of the auxiliary measures used for preventing downhole accidents while drilling.
这种预测方法可以作为钻井时防止井下事故的辅助手段之一。
There have three decisive questions need to solve while drilling in sand gravel layer. The first question is drilling footage.
在砂卵石地层中勘察钻探时，要解决三个关键性的问题：一是钻进进尺问题；
The Research of drilling techniques to follow the geological target while drilling is an important subject of geosteering drilling.
随钻跟踪地质目标的方法与技术研究是地质导向钻井的重要内容。
In 1971 geologists discovered a large underground cave filled with natural gas while drilling in the Turkmenistan village of Derweze.
1971年，地质学家在土库曼斯坦达尔·瓦扎村庄进行钻井工作时，发现了一个巨大的充满天然气的地下坑洞。
Small problems encountered while drilling can become costly when decision must be made rapidly based on insufficient and incomplete information.
当必须根据不充分和不完全的信息快速做出决定时，钻井中遇到的小问题可能会耗资巨大。
Borehole problems and drilling accidents are liable to occur while drilling in western blocks in Tuha Oilfield, which is rich in salt lime beds.
吐哈油田西部各区块富含盐膏、膏质泥岩层，钻井时易发生复杂情况与事故。
This well employed Measured While Drilling, geologic followup, screw drill direction technology and DF-1 multilateral well completion technology.
该井采用了地质跟踪、无线随钻测量技术、螺杆钻具定向技术与DF - 1多分支井完井技术等。
TULLOW oil, an Anglo-Irish exploration firm, announced on August 4th that it had struck oil while drilling in Uganda near the shores of Lake Albert.
英国—爱尔兰石油勘探公司TullowOil于8月4日宣布，该公司日前在乌干达境内的艾尔伯特湖畔钻探的过程中钻到了石油。
LWD (logging while drilling) is one of new logging technology, which can complete the real time measurement of formation information while drilling.
随钻测井是一种新型的测井技术，它能够在钻开地层的同时实时测量地层信息。
The measurement of engineering parameters near the bit while drilling is of significant importance for the safety and efficiency in a drilling process.
钻井过程中，近钻头处钻压、扭矩等钻井工程参数的随钻准确测量对安全、高效钻井是十分重要的。
Drilling results display that electroplated weakly-bonded diamond bit can effectively solve the problem of slipping while drilling in hard, compact rock.
钻进结果显示，采用电镀弱包镶金刚石钻头，能够比较有效地解决电镀金刚石钻头的“打滑”问题。
While drilling in the same formation with the same drilling parameters, the penetration rate of bits of the same degree of wear depends mainly on their cutting structures.
在地层、钻井参数和钻头新度相同的情况下，钻头机械钻速的快慢主要取决于钻头齿面结构是否合理。
While drilling in the same formation with the same drilling parameters, the penetration rate of bits of the same degree of wear depends mainly on their cutting structures.
在地层、钻井参数和钻头新度相同的情况下，钻头机械钻速的快慢主要取决于钻头齿面结构是否合理。
应用推荐