• The new-type double layers wheel shape beam strings prestressed steel roof truss was used in Guangzhou Nansha Gymnasium.

    广州南沙体育馆屋盖采用新型双层轮辐式空间张预应力屋架

    youdao

  • As the wheel turned, the potter shaped and squeezed the lump of clay into a graceful shape.

    随着轮盘转动陶工黏土塑造挤捏成了一个优雅造型

    《柯林斯英汉双解大词典》

  • If I had stopped rolling you around on the wheel, you would have been out of shape.

    果我不让你在轮子上滚来滚去,你就会走形了。

    youdao

  • Volvo graphic logo is formed by the double-ring shape of the wheel, and point to the top right of the arrow.

    沃尔沃图形车标圆环组成车轮形状指向右上方的箭头

    youdao

  • Cultures select and shape technologies, not the other way around, and some societies have rejected or ignored even the gun or the wheel.

    文化选择形成技术不是其他方式决定一些社团甚至已经拒绝忽视车轮

    youdao

  • Comparing design cathode with wheel profile shape, effects of dressing parameters, wheel profile, dressing voltage and conductance on design cathode profile were studied.

    通过设计阴极轮廓的对比,分析了成形砂轮轮廓形状,修整电压电解液电导率设计阴极形状影响

    youdao

  • The test shows when programming, shape of movement track of different turning wheel was compiled with enactment quantity method, machining effects of all sorts of shapes was compared.

    试验表明编程,可以采用设定变量编写不同运动轨迹形状比较各种形状加工效果

    youdao

  • Some main processing parameters are briefly introduced, such as speed of main shaft, feed rate, shape of spinning wheel, deformation rate of each step and structure of template.

    主要工艺参数主轴转速进给形状、道次变形率模板形式等作了简要介绍

    youdao

  • The method of dressing ceramic-bonded corundum grinding wheel by using diamond dressing wheel, then using dressed profile grinding wheel grinds roller surfaces of arc shape is introduced.

    介绍了金刚石滚轮成型修整陶瓷结合剂刚玉砂轮然后用所修得成型砂轮磨削表面具有圆弧形状辊子方法

    youdao

  • We are influenced by color, as primary and secondary hues create a color wheel that can our senses, alert us to danger, remind us of our favorite brands and even shape our mood.

    我们一直颜色的影响,由于主要次要色调创造这样的色轮刺激我们感官警告我们有危险,使我们想起最喜欢的品牌甚至改变我们的心情。

    youdao

  • During shape gear was toothed with gear machined, the movement of cutter head, shape wheel and wheel blank had same thread speed.

    当产齿轮加工齿轮啮合,盘、产形运动具有相同线速度。

    youdao

  • The rotating contacts are made with copper or silver sheet and have rectangular shape glued on the wheel.

    旋转接触长方形胶结车轮

    youdao

  • Experimental results show that the grain size of diamond grinding wheel and grinding depth have important influence on micro-topography such as geometrical shape and surface topography etc.

    实验结果表明金刚石砂轮尺寸磨削深度磨削表面的微观形貌几何形态和表面纹理具有重要影响

    youdao

  • Titanium alloy was considered fit for the wheel core and taper type was the best shape for ultra-high speed wheel by ANSYS analysis.

    通过ANSYS分析我们发现,对于砂轮基盘的材料,钛合金本次试验最佳选择;锥形是砂轮形状最佳的选择。

    youdao

  • The principles, structure and application effect of the non contact type automatic inspection equipment for wheel tread shape are described.

    介绍车轮踏面形状接触式自动检测装置原理结构组成使用效果

    youdao

  • The influences to the surface shape accuracy caused by the mismachining tolerance, the wear and the fixed angle of the cup wheel are analyzed.

    分析了加工残留误差砂轮磨损以及砂轮倾角误差对面精度影响

    youdao

  • The influence of train running speed, wheel-rail friction coefficient, vehicle load, track geometric irregularity, partly load, gauge and the shape of wheel tread on derailment was emphasized.

    论文重点分析了车辆运行速度轮轨摩擦系数、车辆载重轨道几何不平顺轨距大小车轮踏面形状等因素脱轨影响

    youdao

  • The wheel-rail contact geometry relationship is different when different wheel tread shape matches the same rail, which will influence the dynamic performance of the vehicle.

    不同车轮踏面形状同一钢轨匹配具有不同轮轨接触几何关系影响车辆动力学性能

    youdao

  • The plastic deformation would more easily occur due to the impact contact, but it is independent to the shape of tread. However, to eliminate the irregularity between the wheel and rail is necessary.

    碰撞接触容易引起塑性变形,这种变形与踏面形状无关,应注意消除轮轨平顺

    youdao

  • Effect of parameters on lubrication film shape and pressure distribution was analyzed for the typical working conditions of automotive wheel bearings.

    针对轿车轮毂轴承典型应用工况条件,分析工况参数压力分布油膜形状影响

    youdao

  • This paper presents a new analytic calculating method which is a direct method derived from the profile of the relief grinding wheel according to the shape of the cutting edge of a hob.

    本文提出一种根据滚刀刀刃形状要求,直接出铲磨砂轮廓形解析计算方法

    youdao

  • The curvilinear shape of sprocket wheel is the main cause of arching phenomenon of sintering pallets in the return rail.

    链轮齿板曲线形状造成烧结机台车回车道上起拱的根本原因。

    youdao

  • He had learned to read the millionths of an inch on the micrometer and to shape the grinding wheel with an instrument set with a diamond.

    学会在千分尺辨识一百万分之一英寸镶嵌着金刚石工具制作砂轮

    youdao

  • The snap ring is a ring with opening part, the inside of the ring is arranged with a circle of step which is used to buckle the wheel core, and the surface of the step has downward inclined arc shape.

    具有开口形体,环形体内侧设置用于扣压台阶,台阶表面具有向下倾斜弧面形状。

    youdao

  • Glass coaters graphite nozzle (SDXL), graphite fork, graphite set wire wheel, Abnormal shape graphite pieces. etc.

    玻璃镀膜机石墨喷嘴(加长型),石墨拨叉、石墨异型石墨件

    youdao

  • Disc brake, as the name suggests, the shape is like a disc and its main parts include brake disc, wheel cylinder, brake caliper and vitta etc.

    盘式制动器又称为式制动器,顾名思义形状得名:主要零部件制动、分、制动油管

    youdao

  • We do want to recreate some of the beneficial effects of those systems that can apply individual wheel brakes to help the car go where the driver wants it to, when things begin to get out of shape.

    我们确实重新这些系统有利影响可以适用于一些个别车轮制动器帮助汽车驾驶者地方去事情开始变得歪了

    youdao

  • The working life of the boron cast iron shape wheel is twice as long as that of HT25-47 shape wheel, production per ton only increases about 50 yuan.

    铸铁制造,其使用寿命HT25-47型轮寿命的倍以上,生产成本每吨增加五十元左右。

    youdao

  • Almost any shape of the workpiece can be ground. In the grinding process, the system has powerful features for dressing and compensation with the grinding wheel.

    几乎任何形状工件均研磨研磨过程系统超强砂轮修整功能,可在研磨中执行砂轮修整补偿

    youdao

  • Almost any shape of the workpiece can be ground. In the grinding process, the system has powerful features for dressing and compensation with the grinding wheel.

    几乎任何形状工件均研磨研磨过程系统超强砂轮修整功能,可在研磨中执行砂轮修整补偿

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定