Optimum wheel angle reduces the turning circle and makes maneuvering child′s play.
最佳的车轮转角减小了转弯半径，使转向操纵变得轻松。
A steering wheel Angle sensor was introduced and a data acquisition system for steering wheel Angle was built.
介绍了一种汽车方向盘转角传感器，搭建了汽车方向盘转角数据采集系统。
The steady-state response of a vehicle is often evaluated by the steady-state yaw velocity and front wheel angle at a equal speed.
汽车等速行驶时，常用稳态横摆角速度与前轮转角之比来评价其稳态响应。
This paper Outlines axial_flow fan made in Germany TLT Company It is mostly analyzes that the axial_flow fan's wind wheel Angle closed_loop control and wind rate closed_loop control system.
介绍了德国TLT公司生产的轴流式风机，重点对该风机的风叶角度闭环控制和风量闭环控制系统的原理进行了分析。
So, maybe we can actually use the Angle by which the wheel has turned to parameterize the motion.
所以，或者我们可以使用角度，也就是车轮转动的角度作为运动的参变量。
The car has a big piece of glass just in front of the steering wheel with the bonnet sitting in the lions' enclosure, but from the right Angle, it looks like there is no glass.
汽车的方向盘前面有一大片玻璃，还有防备狮子的护罩，不过，从右侧看，那里似乎没有玻璃。
The strategy adopts the active steering technique to change the wheel steering Angle, and hence can reduce the lateral acceleration and improve the anti-rollover ability of vehicles.
该方法采用主动转向技术来改变转向轮的转向角度，有效地减少了汽车的侧向加速度，提高了汽车的防侧翻的能力。
With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding.
一个独特的2片联合之间的车轴和车轮，同样的极端车轮转角分为两个较浅的角度而不联合约束力。
Because of limited turning Angle and higher cost due to complex manufacturing processes, wheel steering is little used.
由于轮转向装置转向角度小，制造工艺复杂，成本高，一般较少应用。
At last, momentum wheel unloading and long-term momentum management are accomplished under the control of thrust after getting yaw Angle estimator and computer simulation is achieved at the same time.
最后阐述了在得到偏航角的估计值后，运用喷气控制来进行动量轮卸载和长期角动量管理，并进行了计算机仿真。
The motion tracking characteristics of steering Angle based wheel trailer system were studied. Two mechanism models which satisfy the definition of the steering Angle were present.
分析了基于牵引操舵角的轮式拖车系统的运动跟踪特性，提出了两种满足牵引操舵角概念的机构模型。
I would tuck the rear wheel in a little closer and steepen the seat tube Angle, for compactness and to distribute a little weight to the feet.
我想抱膝的后轮在更接近和陡所在地管的角度，为紧凑和分配有点重量的脚。
The system is made up of the measurement of axial weight, wheel weight, dip angle, center-of-mass position and so on.
该系统由测量轴重、轮重、侧倾稳定角、质心位置和驻坡度等功能软件组成。
At the same time, we academic analyze and compute the steering wheel during the vehicle turnaround using the transform matrix method considering the camber Angle and toe Angle.
同时本文借助矩阵变换的计算力学方法，考虑进了车轮外倾角和前束角，准确的对转向车轮在转向时的运动变化进行理论分析计算。
Based on vehicle kingpin Angle measuring theory, the paper analyzes the measuring errors of kingpin inclination Angle and kingpin caster Angle from wheel steering Angle measuring errors.
基于汽车主销倾角测量原理，从车轮转角测量误差角度出发，对汽车主销内倾角和主销后倾角的测量误差进行了分析。
Under the same torque, the idle Angle is less when driving part is the race than the star wheel, and also the bigger the clutch size, the less the idle Angle.
在工况条件相同时，选套筒为主动件时的空转角比选星轮为主动件时的空转角小；传递相同转矩时，尺寸大的离合器空转角小。
After receiving the signal of the rotating Angle from the steering wheel, the system drives the platform with CCD to rotate.
该系统接收到驾驶员手中的方向盘旋转角度信号后，驱动安装CCD的旋转平台旋转。
Based on analyzing the gear parameters, the grinding of the gear face with an end face of the grinding wheel was realized by changing the rotating Angle of rotating table.
在对齿轮参数进行数学分析的基础上，通过改变数控回转台的旋转角度，实现了用砂轮的一个端面去磨削齿轮的齿面。
This tool allows you to calculate the actual trail of a bike, given the wheel size, the fork's offset, and the head tube Angle.
这个工具可以让你计算实际线索自行车，由于车轮大小，交岔路口的偏移，并负责管角。
The characteristics of steering angle, steering torque and the pressure in cylinder were analyzed when the steering wheel was held or not in the testing.
着重分析了在阶梯路面上汽车液压动力转向系统在方向盘脱手和未脱手的两种工况下方向盘转角特性、方向盘转矩特性和转向动力缸的压力特性。
According to the computing result of the example, the influence of diameter and erection Angle of grinding wheel...
根据实例计算结果，讨论了砂轮直径及安装角度对磨削齿面干涉的影响。
Meanwhile, it puts forward the conception of Angle adjusting mechanism from the fact that the wheel clearance could lead the changes of phase-angle between two roller.
同时，针对由齿轮间隙引起的两冲辊之间(即凸、凹模之间)相位角的变化，提出设计角度调整机构的理念。
A desirable vehicle model with the best performance of side slip Angle and yaw rate is established through connecting direct yaw moment control (DYC) with four wheel steering (4ws) system.
将横摆力矩控制(dyc)与四轮转向(4ws)系统相结合，建立侧偏角和横摆角速度具有最佳输出响应的车辆理想模型。
The wheel head can be orientated in double axes so that any spiral Angle and back Angle may be adjusted rapidly.
该机床磨头可以又轴定位，任何螺旋角和后角均可快速调整。
Old water buffalo, Angle curved, a two curved yo circle, I ride Niu Beiduo to be spirited, likely is grasping the steering wheel.
老水牛哟，角弯弯，两个弯弯哟一个圆，我骑牛背多神气哟，就像握着方向盘哟。
Plated frame, high backrest, adjustable backrest Angle, after bending handrails, lift foot care, solid front, pneumatic rear wheel plastic wheel frame, folding handle support.
电镀车架，高靠背，可调靠背角度，后折弯扶手，升降脚托，实心前轮，塑料轮框充气后轮，可折支撑把手。
The influences to the surface shape accuracy caused by the mismachining tolerance, the wear and the fixed angle of the cup wheel are analyzed.
分析了加工残留误差，砂轮磨损以及砂轮倾角误差对面形精度的影响。
Through kinematic analysis , Two drive wheel differential than can control motor- wheelchair make arbitrary angle movement.
通过对轮椅系统的运动学分析，两个驱动轮的差动比可以控制电动轮椅取得任意的角度运动。
Through kinematic analysis , Two drive wheel differential than can control motor- wheelchair make arbitrary angle movement.
通过对轮椅系统的运动学分析，两个驱动轮的差动比可以控制电动轮椅取得任意的角度运动。
应用推荐