By analyzing the effect of each factor on the welding quality, the optimal spot welding parameters of automobile steel plate can be selected easily.
通过分析各因素对电阻点焊质量的影响，可以方便地得到汽车用钢板电阻点焊的最佳工艺参数。
Although the factors which influence the quality of the joints are complex, satisfactory results can be obtained with the proper welding parameters.
虽然影响接头质量的因素很多，但只要焊接参数选择恰当，就能获得令人满意的焊接接头。
The welding parameters are very important in the explosive welding.
在爆炸焊接中，爆炸焊接参数的确定是非常重要的。
And computer to connect, recording each welding parameters for welding quality retrospective.
可与电脑连接实时记录每次焊接参数，便于焊接质量追溯。
By serial communication, the cooperative control of welding parameters is realized between PLC and microcontroller.
通过串行通信，PLC和单片机之间实现了对焊接参数的协调控制。
Therefore, optimizing welding parameters was a valid means to minish and control welding residual stress and distortion.
因此，优化焊接工艺参数是减小、控制焊接残余变形和残余应力一种有效手段。
By analysis of the establishing process of the keyhole weld pool, the regularities of the welding parameters are obtained.
通过穿孔过程分解研究，揭示出焊接工艺参数在小孔稳定建立过程中的影响规律。
The welding parameters of base plate and clad plate refer to those of the same base material and clad material respectively.
基层的焊接工艺参数按同种基层材料焊接的工艺参数确定。
The welding parameters of CO2 welding iron, P-GMAW of iron and DP-GMAW of aluminum are long-step calibrated through a lot of tests.
通过大量工艺试验，对CO2焊钢、P -GMAW焊钢、DP -GMAW焊铝等工艺的焊接参数进行了大步距标定。
Then a lot of experimental data about welding parameters and corresponding spot welding quality were supplied to the ANN for training.
然后将试验得到的大量点焊工艺参数与相应点焊接头质量的试验数据提供给神经网络学习。
Effects of welding parameters on the penetration of austenitic stainless steel A-TIG weld seam with the home-made active flux were carried out.
利用自制的活性剂，考察了焊接工艺参数对奥氏体不锈钢A-TIG焊焊缝熔深的影响。
Therefore, during the welding process the welding parameters should be changed appropriately, and the welding conditions should be adjusted too.
因此在焊接过程中应该适当改变焊接工艺参数，调整焊接规范。
The effect of welding parameters such as welding current, welding velocity and welding voltage on A-TIG weld's depth and width has been studied.
研究了焊接电流、焊接速度及焊接电压等焊接工艺参数对A - TIG焊焊缝熔深的影响规律。
The new serial communication software between PLC and EPC was designed, which is convenient to set the welding parameters and collect temperature.
通过软件改进设计，实现工控机与PLC串行通信，以方便参数的设定和温度采集；
The high-speed camera system and data acquisition system of welding parameters were created for tandem MIG welding of high strength aluminum alloy.
建立了高强铝合金双丝MIG焊熔滴过渡高速摄像系统以及焊接参数采集系统，获取了不同工艺规范下的脉冲熔滴过渡形式。
This test piece shall be welded using the identical welding parameters as the original test and only weld metal impact test specimens shall be tested.
此试件应使用与原始试验相同的焊接参数进行焊接，并且仅对焊接金属冲击试样进行试验。
The influence of laser transmission welding parameters for polypropylene (PP) plastics on welding quality is investigated by orthogonal design method.
利用正交实验方法，研究了聚丙烯(PP)塑料的激光透射焊接工艺参数对焊接质量的影响。
In this paper, relation between electron beam welding parameters and temperature field of beryllium is studied quantitatively with finite element method.
采用有限元方法，定量分析了电子束焊接工艺参数与铍环内表面温度的关系。
The welded joint was completed by root welding, filling welding and cover welding, their welding parameters were obtained from the experimental analysis.
整个焊接接头要通过根焊、填充焊和盖面焊来完成，通过试验分析得到各焊道所对应的焊接工艺参数。
The developed welder presented many advantages such as welding parameters preset, store, lock, display, and automatic arc starting and stopping functions.
该控制器具有焊接参数预置、记忆、锁定、数显以及自动引弧、收弧等功能。
Drop transfer in the process of MIG welding is very complicated and quality of weld line is easily impacted by welding parameters coupled with each other.
MIG焊过程熔滴过渡过程复杂，影响焊接质量的参数多，相互间耦合性强。
PLC is the core of this device, supplemented by the touch screen to set and modify the welding parameters and display the state of welding process parameters.
该设备以PLC为控制核心，辅以触摸屏进行堆焊参数的设置和修改，并实时显示堆焊过程中的参数状态；
The key of Cu-Al pipe butt welding is to control the welding parameters. In the original control system, all welding parameters were controlled by time-relays.
铜铝管焊接的关键是对焊接参数的控制，原控制系统采用时间继电器控制焊接参数。
If there is fault, the system remembers the current position and the welding parameters automatically, and stops the welding according to the technical sequence.
如有故障，系统自动记忆当前位置和焊接参数，并按工艺顺序停止焊枪。
Compared with cored wire, the solid wires have not so good welding usability showing oxidized and crinkled weld appearance as the welding parameters are greater.
而对于实心焊丝，在较大焊接工艺规范下，很容易出现焊缝表面的氧化起皱，焊缝成型不良。
Nickel rod needs to be lengthen by argon arc welding before the electroslag refinements, large welding parameters are needed to assure the sufficient penetration.
金属镍在电渣精炼前需用氩弧焊焊接接长，为保证焊接接头具有足够熔深，需要大参数进行焊接。
The influences of basic metal chemical composition, heat treatment conditions and welding parameters on the pressure vessel brittle fracture have been investigated.
研究了诸如化学成分、热处理条件和焊接因素对压力容器脆性破坏的影响。
Therefore, it has a great significance in On-line supervision of welding process and welding quality to measure these dynamic welding parameters rapidly and accurately.
因此，快速、准确地同步测试这些动态焊接参数，对在线监控焊接过程及焊接质量有重要意义。
The on-line programming of MAG welding parameters is a novel method of intelligent controlling of welding quality which aims at improving welding robots adaptive ability.
视觉弧焊机器人MAG焊接参数在线规划是一类以提高弧焊机器人的适应能力为主要目标的焊接质量智能控制方法。
The spot weldability and the strength of single spot-welded joint of a chinese steel WP 370 were investigated, and the effects of welding parameters on it were also tested.
以国产WP 370含磷高强度钢板为对象，研究了它的可焊性、点焊焊点的强度以及点焊工艺参数对它们的影响。
应用推荐