Reliable performance is optimized for welding carbon steel, stainless steel and aluminum.
在碳钢、不锈钢和铝焊接应用中，得到优化可靠的焊接性能。
Suitable for welding carbon steel, stainless steel, copper and its alloy, alloy steel and cast iron.
适用于碳钢、不锈钢、铜及其合金、铸钢的焊接。
All carbon arc gouged surface areas shall be ground to clean bright metal prior to subsequent welding.
开始后续焊接前，所有碳弧气刨面区域应接地至洁净明亮的金属。
Preheating shall be carried out for carbon and low alloy steel welding where required. Preheating temperature shall be kept uniform from the start to the end of welding.
在进行碳钢及低合金钢的焊接时应进行预热。预热温度在焊接开始到结束期间应保持均衡。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
Material for rail of crane is of strong strength because of high carbon content, but of poor weldability, which makes more cracks. Strict technique is required in such welding.
吊车轨道的材料由于其含碳量较高，强度大，可焊性较差，焊接时容易产生裂纹， 因此要严格按照工艺执行。
Most suitable for high efficiency and high quality welding of low carbon steel, stainless steel etc.
最适合高效率、高质量地焊接低碳钢、不锈钢等材料。
High speed rail material: low carbon steel wire high speed rail production process: weaving and welding.
高速护栏材质：低碳钢丝高速护栏制作工艺：编织焊接而成。
The carbon content being high, this kind of welding rod is not fit for welding machine parts that have to withstand high stress.
由于含碳量高，所以这种焊条不宜焊接必须承受高应力的机器部件。
The smelting parameters and continuous-casting process in developing carbon welding rod steel of H08A are introduced, the cause for success and lost is analyzed, some measures proposed.
介绍了宣钢试验碳素焊条钢h 08 A的冶炼参数和连铸工艺，分析了试验成功的原因和失败的教训，提出了解决措施。
The application of Ar-CO2 mixed gas in the welding of low-carbon steel could improve welding process, increase welding quality and decrease welding cost.
CO2混合气应用在低碳钢焊接上，可以改进焊接工艺，提高焊接质量，降低焊接成本。
Up to now, the welding theory for high carbon alloy steel has not been well established.
迄今为止，高碳合金钢材料的焊接理论仍未完善。
Mainly used in welding low carbon steel, alloy steel, stainless steel, wear-resisting steel and cast iron.
主要用于低碳钢、合金钢、不绣钢、耐磨钢及金属材料的焊接。
If there aren't cast-iron electrode, the cast-iron electrode can be made by ordinary low carbon steel electrode, and repair the damaged stock with arc cold welding.
在没有铸铁焊条的情况下，采用普通低碳钢焊条制作铸铁焊条，用电弧冷焊技巧修复损坏的铸铁件。
Especially suitable for furniture, steel, vehicles, hardware. other industry to welding the low carbon steel, low alloy steel, stainless steel and other metal material.
特别适合于家具、钢结构、车辆、五金等行业中焊接低碳钢、低合金钢、不锈钢等金属材料。
Suitable for welding of critical structures of low carbon steel and low-grade strength of low alloy.
用于焊接较重要的低碳钢结构和强度等级较低的低合金钢。
This article focuses on the welding technology of the carbon steel, low alloy steel, stainless steel, cast iron and other metal materials.
本文主要阐述了碳钢、低合金结构钢、不锈钢、铸铁等金属材料的焊接技术。
The research progresses of welding between duplex stainless steel and carbon steel in domestic and abroad are summarized.
综述了近年来国内外双相不锈钢与碳钢异种金属的焊接研究进展。
Suitable for low carbon steel, stainless steel, copper alloy, titanium alloy and cast iron welding.
适用于低碳钢、不锈钢、铜合金、钛合金及铸铁的焊接。
It is very difficult to welding a high carbon steel rail and a high manganese steel frog, which is still a worldwide puzzle.
碳钢钢轨与高锰钢辙叉的焊接难度很大，仍属国际性难题。
It's widely used in the welding of carbon steel, low carbon alloy steel, stainless steel, steel and alloying steel.
广泛用于碳钢、低碳合金钢、不锈钢、钢及钢合金的焊接。
The developed welding power source ZX5-800Dshows a satisfactory performance in the welding process of TIG. Shield metal arc, submerged arc and the. carbon arc air gouging.
研制的ZX5一800D电源在进行钨极氩弧焊、手工电弧焊、碳弧气刨及埋弧焊时均获得满意的性能。
Material: low carbon steel wire, aluminum magnesium alloy wire. Textile and characteristics: weaving and welding.
材料：低碳钢丝、铝镁合金丝。纺织及特点：编织焊接而成。
The chemical composition, mechanic property, weldability and corrosion resistance of argon arc welding wire for low carbon steel pipe line are contrasted and analyzed.
对低碳钢管线用的氩弧焊丝的化学成分、机械性能、可焊性能、耐腐蚀性能进行对比分析，为合理选用焊丝提供了依据。
Suitable for welding of low carbon steel, medium carbon steel, low alloy steel and etc.
适用于焊接低碳钢、中碳钢、低合金钢及铸件。
Widely used for welding of low carbon steel, wire stainless steel plate etc.
广泛用于低碳钢板、线材、不锈钢板等材料的焊接。
It has low diffusible hydrogen and good low-temperature impact toughness, suitable for welding middle-carbon steel and pressure containers of low-temperature steel.
扩散氢含量低，低温冲击性能优异，适用于低温钢、中碳钢等压力容器的焊接。
The effect of span between two cores of lime-titania type carbon-steel electrode was investigated using the method of overlay welding on the plate work-piece and high speed camera system.
采用平板堆焊的方法及高速摄像系统，研究了双电极钛钙型碳钢焊条的焊芯间距对焊接工艺和电弧形态的影响。
Companies with welding, carbon dioxide gas shielded arc welding, argon, carbon arc gouging, oxygen cutting and other special operations personnel.
公司具备电焊、二氧化碳气体保护焊、氩弧焊、碳弧气刨、氧气切割等特种作业人员。
Companies with welding, carbon dioxide gas shielded arc welding, argon, carbon arc gouging, oxygen cutting and other special operations personnel.
公司具备电焊、二氧化碳气体保护焊、氩弧焊、碳弧气刨、氧气切割等特种作业人员。
应用推荐