An automatic seam tracking system of welding robot based on double-mode control is presented.
该文提出了一种基于双模控制的焊接机器人焊缝自动跟踪系统。
Therefore, the automatic determination of the fuzzy rule and in-process adaptation of membership function are required for the advanced welding process control.
因此，模糊规则集的自动生成及隶属度函数的在线调整对于现代焊接过程控制来说是迫切需要的。
Based on multi microcomputer, the automatic control system of pipeline all position welding process is developed. The system structure, working principle and software design are described.
建立了基于多微处理器的管道全位置焊接自动控制系统，描述了其系统结构、工作原理和软件设计。
This paper introduced an automatic air mixing equipment for gas protection welding at work site, which can control the accurate proportion of airs.
介绍了一种用于焊接现场的气体保护焊的自动混气设备，该设备能精确控制气体混合比例。
The realization of modern automatic welding mainly depends on the computer control technology.
现代焊接自动化技术主要是依靠计算机控制技术来实现的。
The adaptable control TIG automatic welding system for large-size astronautics container circumferential was introduced in this paper.
介绍了一种大型宇航容器环向焊缝适应控制TIG自动焊接系统的设计方案。
For welding thicker pieces, automatic frequency control should be adopted.
对于较厚的焊件，应进行频率自动控制。
As a widely used welding method, arc stud welding technology has some superiority in higher welding efficiency and in easier to achieve automatic control etc.
作为一种广泛应用的螺柱焊接方法，电弧螺柱焊技术具有焊接效率高，易于实现自动化控制等优点。
Using the programmable controller in the automobile rear axle house ring stiffener, logic sequential control was realized in the top plate automatic welding craft.
采用可编程控制器在汽车后桥壳加强环、后盖自动焊接工艺中实现逻辑顺序控制。
This special welding machine has rational structure, USES PLC for automatic control, reduces labor intensity, and improves work efficiency and welding quality of workpiece.
该焊接专机结构合理，利用PLC进行自动控制，降低了工人的劳动强度，提高了工作效率，改善了工件焊接质量。
Programmable controller C20 is used in the program control of TIG automatic welding on manufacturing micro motor shell and stator core.
利用C20系列可编程序控制器对微电机加工制作中的定子铁心、电机壳体t IG自动焊接实现过程程序控制。
This paper has offered a kind of design project, which is used in the structure and control of a new all-position automatic welding machine, and has carefully studied its automatic welding system.
本文研究了一种全新的管道全位置自动焊机的结构、控制设计方案，并对自动化焊接系统进行了深入的研究。
The automatic control system of welding torch height for arc welding is developed.
设计了一种焊炬高度焊接自动控制系统。
Seam tracking control is the key during welding process, which plays an important role in the automatic control of welding quality.
焊缝跟踪控制是焊接过程需要解决的关键问题，也是现代弧焊过程焊接质量自动控制的重要组成部分。
The PLC controlled system which is used to control step-motor and electric welding machine is introduced in this paper, and automatic control of T-type channel Joints is realized.
利用可编程序控制器（PLC）控制步进电机和电焊机，实现T型管道接头焊接的自动化控制。
The results of experiments prove that the automatic seam tracking system based on double-mode control can realize real-time automatic seam tracking of the welding torch of welding robot.
实验证明，基于双模控制的焊缝自动跟踪系统可以实现焊接机器人焊枪对焊缝的实时自动跟踪。
Automatic control has been used in the ignition of electric arc, welding wire-feed, movement of arc along welding direction, receiving arc of welding, etc.
埋弧自动焊时，引燃电弧、焊接送丝、电弧沿焊接方向移动及焊接收尾等过程均可实现自动化控制。
The automatic control system of circular seam welding process for non - rotated pipeline was developed in the paper.
建立了非旋转管道环缝焊接自动控制系统，并介绍了其系统结构和工作原理。
The automatic control of welding quality has always been a difficulty and hotspot in welding field, and the welding sensing technique is a key point in the process of it.
焊接质量自动控制一直是焊接界研究的热点和难点。而焊接过程传感器是其中的关键技术。
This paper mainly introduces the structures, PLC automatic control of welding clamp of the body of CH1015 motor-car.
本文主要介绍了CH10 15车身总成焊接夹具结构及其PL C全自动控制。
With soft hardware, the control system can achieve two kinds of welding methods, full welding and orientation welding by weld processing logic automatic control.
利用软硬件结合，实现焊接的时序控制以及满焊和定位焊两种焊接方式。
The levels of application and judgment of fully automatic ultrasonic detecting technique were further improved to strictly control welding quality.
提高全自动超声波检测技术的应用和判别水平，严格控制焊接质量；
Generating and welding dual use set consists of generator, welding inverter, automatic control system, and internal-combustion engine controlled by speed regulator.
采用具有全程调速器的内燃发动机、发电机、逆变弧焊电源，以及二次控制系统构成发电电焊两用机。
To improve the stud welder performance and welding quality, this paper adopts automatic computer control system to the welder.
为了改进现有螺柱焊机的性能，提高焊接质量，本文研制了一种微机监测引弧式螺柱焊机。
Based on just mentioned put forward a basic thought of realizing the automatic control system of keyhole plasma arc welding and designed ensemble control programme.
据此提出了实现等离子弧焊闭环质量控制的基本思想并设计了总体控制方案。
Three control modes have been worked out, such as time-control, deformation-control and power-peak control. Each model realizes automatic control in linear friction welding.
采用时间控制、变形量控制和功率峰值控制三种控制方式实现了焊接过程的自动控制。
The purpose is making use of single chip micro-computer to control four processes of mutual welding of reinforcing steel bar, which makes automatic mutual welding realize really intelligent control.
利用单片机对钢筋对接焊的四个过程进行控制，使全自动对接焊真正实现智能控制。
The company has the advanced large-scale automatic computer program control resistance welding machine, complete specialized check-out facility and exquisite processing craft.
浸塑电焊网、隔离栅及防风抑尘网、钢筋焊接网等。公司拥有先进的大型自动电脑程控压阻焊机，齐全专业的检测设备和精湛的加工工艺。
The NBC series SCR control of MIG / MAG semi-automatic gas-welding machine got "high-tech products Award" and entered a "high-tech enterprises" rank.
研制生产的NBC系列晶闸管控制MIG/MAG半自动气保焊机获国家“高新技术产品奖”，并进入了“高科技企业”行列。
The NBC series SCR control of MIG / MAG semi-automatic gas-welding machine got "high-tech products Award" and entered a "high-tech enterprises" rank.
研制生产的NBC系列晶闸管控制MIG/MAG半自动气保焊机获国家“高新技术产品奖”，并进入了“高科技企业”行列。
应用推荐