Corrosion rates can vary between welded and non-welded metals, therefore it is advisable to study the behavior of both conditions.
由于焊接金属与非焊接金属的腐蚀速率会不同，所以有必要研究两种情况。
Electrical effect. Two different metals welded together can transform heat energy into electrical energy. This principle is used in the refinery to measure temperature by use of thermocouples.
电效应。两种不同的金属焊接在一起可以将热能转化成电能。在炼油厂，根据这一原则，通过使用热电偶来测量温度。
According to the actual test, road laying welded wire netting than artificial help, can reduce the crack occurs above 75%.
据实际测试，道路铺设焊接钢丝网比人工帮扎网，能够减少75%以上的裂缝发生。
According to the specific circumstances of the project can also take charge of construction directly welded pipe, but must check a stainless steel tube joint can demand reinforcement.
依据工程的详细状况也可以采取主管上直接焊接支管的构造，但必需校核支不锈钢管衔接处能否需求补强。
After you have welded the shoot sides in place you can weld the hinge pieces to the door.
当您在焊接的地方，您可以焊接件的铰链在门的拍摄地。
If user combines the two in actual operating process, frequency of mechanical rapping can be reduced and the impact on heating surface welded junction of mechanical rapping position can be relieved.
如用户在实际运行过程中两者结合使用，可减少机械振打的频率，减轻对机械振打部位的受热面焊口的冲击。
If the valve body material can be welded, but very different thermal expansion coefficient, or changes in operating temperature range of a larger thread junction closure weld must be honey.
如果阀体的材料是可以焊接的，但膨胀系数差异很大，或者工作温度的变化幅度范围较大，螺纹连接部必须进行蜜封焊。
Based on these parameters, optimized process parameters set with mathematical statistical full factor experiments can guarantee the quality of welded plastics parts in batch production.
以这些参数为基础，借助数理统计的全因子实验设置优化的工艺参数，可以保证批量焊接产品的质量。
Reducing partial rigidity: When closed weld or the weld which has less rigidity are welded, we can take anti-deformation way to reduce the partial rigidity of component.
降低局部刚性：焊接封闭焊缝或其刚性较大的焊缝时，可以采取反变形法来降低结构的局部刚性。
Both riveting units are governed by the same control and can be supplied on a welded workbench.
两个铆接单元由同一个控制器来控制，并被安装在定制的工作台上。
When used as a wedge welder, heavier weight materials can be welded together to make large weather resistant products and structures.
当用作楔焊机时，也可以将较重的材料焊接在一起生产出抗风化和产品或结构。
The results show that the proper selection of modes of welded joints and welding technologies can double improve the fatigue life of structures.
结果表明，合理选择焊接接头形式和焊接工艺可以成倍地提高结构的疲劳寿命。
According to the German DVS Weld Standards and the conclusion in this works, plastics with different thermal and rheological properties can be well or even optimally welded.
根据DVS焊接标准和本文的研究结果，可以证实热学和流变学性能不同的塑料能够很好地进行焊接。
With austenitic welding material, solid wire, flux-cored wire and electrode, welded joint mechanical property of TCS ferritic stainless steel all can meet usability.
T CS铁素体不锈钢采用奥氏体型焊材，实芯焊丝、药芯焊丝和电焊条方法，焊接接头力学性能可以满足使用要求。
This article introduces a kind of meter which can measure the misalignment and inclining of the welded head, and describes the principle and structure of the meter as well as its usage.
介绍了一种能测量焊头的偏移和倾斜量的仪器，阐述了仪器的原理和结构，描述了其使用方法。
It can simulate a human expert to make analysis and design scheme mainly for four kinds of typical engineering components-pressure vessels, huge rotation constructions, pump-rod and welded structures.
它可以模仿人类专家，对四种典型工程构件-压力容器、大型旋转构件，螺杆泵及焊接结构进行分析和设计。
This universal mill stand can be used not only in a new welded steel pipe mill to be designed but also in the reform to old welded steel pipe mill.
这种机架不仅可以用于新设计的焊管机组中，而且还可以用于对现有焊管机组的改造。
In the case of welded tube and pipe, test heads can be provided for manual or automated weld following.
碰到焊接管材时，这些探头可手动焊接或者自动焊接。
Assuming that the knuckle Face Plates have been fabricated (and welded to the frame), the steering knuckle assembly can now be assembled.
假设猪脚面板已制造(和焊接到框架)中，转向节大会，现在可以进行组装。
Lots of dynamic information, which can directly or indirectly reflect the quality of welded spot, are included within the dynamic signals of resistance spot welding process.
电阻点焊过程动态信号蕴含着大量直接或间接反映焊点质量的动态信息。
WPES is a type of application software for design in the field of welding. The system can manage the WP files and design and compute the strength of welded joint in the steady load.
焊接工艺专家系统属于设计型的焊接领域应用软件，本弧焊工艺专家系统兼有焊接工艺文件的管理能力和焊接接头静载强度的设计计算能力。
The stator lead wire of QD115 starter and the lug can be welded without flux filled, which avoids the phenomenon of strands of thin wires getting hard after welding.
解决了QD 115定子引出线与接线片和电器产品电源线与接线片不加填充焊料的焊接问题，避免了多股细铜线焊后变硬的现象。
The structures made of square hollow steel sections by using the directly welded joints are fabricated easily and economically, which can be found in many applications all over the world.
由方管直接焊接组成的结构，节点构造简单，加工方便，造价较低，在国内外已被广泛应用到各种工程领域。
By taking laser welding, different steel base, hardness, surface treatment sheet steel can be welded together to meet the special requirements of different parts.
通过激光焊接可将不同材质、不同强度、不同表面处理的钢板焊接在一起，以满足零件不同部位性能的需要。
Slam latch is screwed onto latch support which is either screwed or welded to the door. Assembled without insert it can be opened with a tapered square key. Bolt has free stroke.
这种锁舌用螺丝装在锁支架上，而锁支架用螺丝固定或焊接在门上，无锁芯的装配时，可用锥形四方匙开启锁栓为自由行程。
The experimental results show that the fatigue life of steel welded joints can be improved by grinding the weld bead, especially for the higher strength steel.
试验结果表明焊件的疲劳寿命可以通过打磨焊缝得到改善，尤其对于高强度钢焊件。
A precise pass-size and welded pipe with excellent surface quality can be get when the deformation way of cube-pass and design calculation with surpass trigonometric equation are used.
采用“立方”孔型变形形式，结合简明的超越三角方程进行设计计算，以得到精确的孔型尺寸及高表面质量的焊管。
Based on the related sketches, pass design for the welded shaped steel tube can be obtained with analytics. Aided with computer, computing speed and accuracy can be enhanced.
在引入辅助图形的基础上，运用解析法计算异型钢管的孔型，并借助计算机进行辅助设计，可提高运算速度和精度。
High quality stainless pipe valve and seamless welded joint can ensure absolutely air conurbation and durability of pipe system.
高品质不锈钢的管道阀门，无缝焊接的连接口，以保证绝对的气体密闭性和管道系统的耐用性。
High quality stainless pipe valve and seamless welded joint can ensure absolutely air conurbation and durability of pipe system.
高品质不锈钢的管道阀门，无缝焊接的连接口，以保证绝对的气体密闭性和管道系统的耐用性。
应用推荐