For further optimization design, the influences of weld length, stiffening rib and diaphragm plate for the web stresses distribution are studied and compared.
研究焊缝长度、加劲肋和横隔板等对腹板应力的影响，探讨锚固区设计的进一步优化。
Since there are weld defects in welds, using traditional strength theory based on no defect and no crack to design, crane's security in rating load can't be insured.
由于在焊缝部位存在焊接缺陷，采用传统的建立在构件无缺陷、无裂纹基础上的强度理论进行设计计算时，往往不能确保起重机在额定载荷下使用的安全性。
The hardware design and the project of software in an intelligent detecting system for lack of weld were proposed.
提出了一套漏焊检测系统的硬件设计和软件实现方案。
The development procedure of the milling machine on line used in production of weld H type section steel was described in details, including the design idea, structure mode and working principle.
详细阐述了焊接H型钢生产线在线铣削机研制过程中的设计思想、结构形式和工作原理，介绍了设备的结构特点和使用效果。
This paper discusses how the weld groove and the plate thickness affect the sheet metal manufacture processing, and how to design with reasonable method.
本文阐述了焊接坡口和板厚处理对钣金加工制造工艺的影响，并用合理的方式设计和处理。
On the basis of abroad and domestic references about large welded gear and its objects, computer aided design for the large welded gear is achieved in selection of structure form, size and weld.
在分析焊接齿轮资料和实物的基础上，实现了用计算机对大型焊接齿轮的结构型式、尺寸、焊缝进行辅助设计。
This paper focuses on the design and implementation of et weld detecting system and the research of TOFD crack localizing algorithm in non-destructive testing area.
本文主要设计开发了基于无损检测中涡流检测的焊缝识别处理机和研究了无损检测中的超声tofd检测的缺陷定位算法。
By analyzing and discussing design of fillet weld connection, a comment is presented and some useful Suggestions on design of fillet weld connection are given.
通过对角焊缝连接设计的分析讨论，提出一个值得探讨的问题，并就角焊缝连接设计给出一些有益的建议。
Along with the wider use of monolithic joint in the design of long span steel truss Bridges, the fatigue of weld details under traffic loads gradually attracted more attention of the architects.
随着整体节点正逐渐在大跨度钢桁架桥设计中被采用，在交通荷载作用下焊接局部的疲劳问题日益引起人们的重视。
Axiomatic design theory provides an instructional frame for the design of multi-part integration assemblage composed of multi-robots and automatic weld system.
公理设计理论为由多机器人组成的多零部件集成装配与自动焊接系统的设计提供了一种指导性的框架。
The question whether hidden weld in unstiffened overlapped CHS KK-joints is welded or not is not clearly metioned in current code for design of steel structures(GB50017-2003).
KK型圆钢管搭接节点，搭接处隐藏焊缝焊接与否的问题，现行钢结构设计规范（GB50017-2003）未作明确要求。
This article discusses causes of weld cracking in crane's steel structure, recommends ways of remedy and makes proposals concerning design and fabrication to avoid cracks.
本文论述几种起重机钢结构焊缝裂纹产生的原因，提出焊缝裂纹的修复方法和起重机钢结构设计、制造中防止焊缝开裂的改进措施。
Welding test of the products has shown that penetration of the lap weld can be controlled in required tolerance for design using the control system.
产品焊接试验表明它可以使搭接焊缝熔深控制在产品设计要求的范围之内。
The difficult technical problems are solved due to the structure design improvement, local structure and weld position changes.
通过对其结构进行设计改进，改变局部结构及焊缝位置，解决了多年来工艺方面的难题。
The test results show that the quality of spray weld coat accords with the demands of design and usage.
试验结果表明，喷焊层质量符合产品设计使用要求。
The paper briefly describes the design features of the outer-bur scraping system for hi-frequency weld pipe.
简介了改进的高频焊管外毛刺刮削机构的设计特点。
The unique design of the output of the physical properties more suitable for filling wire welding, weld appearance.
独特的输出物性设计更适合填丝焊接，焊缝美观。
Design improvement is in three stages partial, geometrical stress concentration improvement, pure casting technology improvement and a forge-weld box body design.
设计改进分三个阶段，即局部几何性应力集中改进、提高铸造质量的纯工艺改进和锻焊组合结构抱轴箱体的设计。
And the welding connecting of them are advised to use slope butt weld that are fully welded, but when the double-sided fillet weld is used, they should be design on equal strength.
节点中的焊接宜采用完全焊透的坡口对接焊缝连接，当采用双面角焊缝连接时，可按等强设计。
The structure, constitute, working principle, and design feature of automatic welding system which pro- duces extra- thin, large diameter, long tube, and longitudinally or circle weld are introduced.
介绍了超薄壁，大直径，长筒体，纵、环缝自动焊接系统的结构、组成、工作原理及设计的主要特点。
Through analysis of structure of the socket weld connection pieces, determined the layout project, designed a progressive die. Introduced the design points of main parts and die structure.
通过对插座连接焊片结构特点的分析，确定该冲压件的排样方案，设计了一副级进模。介绍了主要工作零件及模具总装结构设计。
Carry on reinforcing bar colligation, weld according to the norm and the design request and machine conjunction.
按规范和设计要求进行钢筋绑扎、焊接及机械连接。
A choke shape design is used for obtaining the satisfactory weld joint.
采用缩口的接触型式，能获得满意的电阻焊接头。
This text aims at to weld the fixtures design problem, expecting the fixtures use to result in before analyze from the theories of weld a craft problem.
针对焊接夹具设计问题，从理论上分析了前期所使用的夹具造成的焊接工艺问题。
The integrally weld base is used in the design to ensure the integral stiffness of machine;
在设计中，采用整体焊接底座保证机器的整体刚性；
Abstract: This subject was raised by an automotive company. Based on the welding design on the curved surface, the effect of prior deformation on the weld structure was studied.
摘要：基于某汽车公司提出的曲面焊接设计需求，研究了变形对焊接组织的影响。
This research is mainly addressed on solving the weld seam tracing problems existing in design of wheel mobile robot based spherical tank welding robot.
主要研究以轮式移动机器人为本体的球罐焊接机器人的焊缝跟踪问题。
The feasibility, cost and theoretic basis of the continuous extrusion process for producing tin brass weld wire are studied with its technological process and the design of extrusion dies introduced.
本文论述了锡黄铜焊丝连续挤压工艺的可行性、成本和理论基础，介绍了连续挤压工艺的方案以及挤压模具系统的设计。
It is also proved theoretically that the deduced method for fillet weld connections meets the requirements of the probabilistic limit states design procedures.
从理论上证明角焊缝连接的折算方法满足概率极限状态设计的要求。
It is also proved theoretically that the deduced method for fillet weld connections meets the requirements of the probabilistic limit states design procedures.
从理论上证明角焊缝连接的折算方法满足概率极限状态设计的要求。
应用推荐