Opening should be cleaning in weaving process to reduce weaving broken ends.
织造工序要保持开口清晰，降低织造断头。
Depending on the weaving process, is divided into usually, stripe, jacquard poplin.
根据织造工艺不同，分为平素、条格、提花府绸。
And based on that, the weaving process of rectangular hollow fabric structure was analyzed.
在此基础上分析矩形空芯结构织造过程。
In the weaving process, the company has the most advanced Belgium gamma X rapier loom more than 250.
在织造工序，公司拥有最先进的比利时必佳乐伽马x剑杆织机250多台。
A solution for thread compensation of leno and stationary threads during the weaving process is shown.
展示了织造过程中纱罗纱线和固纱的补偿解决方案。
The system provides a user-friendly interface and can design intelligently the wool fabric weaving process.
该系统具有友好的人机界面，可以智能化地进行毛织产品工艺设计。
In this paper, the causes of warp breaking are investigated through practically observing the weaving process.
本文就织机上引起断头的原因进行了探讨。
The harm of the yarn hairiness for weaving process and some questions in previous researching about it i described.
介绍了纱线毛羽在织造过程中的危害及以往研究中存在的问题。
This paper discusses the characteristics of protein milk fiber and protein milk fabric and introduces the weaving process .
阐述了牛奶蛋白纤维和牛奶蛋白纤维织物的特性，介绍了织部工艺生产实践。
According to the weaving process can be divided into hand woven carpet, woven carpet, gauge carpet weaving, non-woven carpets;
按编织工艺可分为手工编织地毯、机织地毯、簇绒编织地毯、无纺地毯；
The characteristics of bamboo fiber are introduced. Some points to pay attention in spinning and weaving process are expounded.
文章介绍了竹原纤维的特性，阐述了竹原纤维在纺纱织造生产中应注意的一些问题。
Brocade is made of dyed latitude and longitude lines, which went through the jacquard weaving process of the fabric weave pattern.
织锦是指用染好颜色的彩色经纬线，经提花、织造工艺织出图案的织物。
Including the control of weaving process, the design and adjustment of weaving technique, the arisen problems and their settlements etc.
包括织造过程的控制、织造工艺的设计和调整、织造中产生的问题和解决的办法等。
In this paper, the wool-like fabric designing and weaving process from modified polyester yarn in cotton mill were studied and put forward.
本文对棉纺行业生产差别性涤纶短纤维仿毛织物的织造工艺和织物设计进行了研究，提出了仿毛织物的织造工艺和织物设计方法。
Strength, equal intervals each cage is about 1M, the spacer, and in each block of stone cage galvanized wire mesh weaving process, and weft diameter.
强度，每个笼子1M左右的间隔相等，使间隔物，并在每一块镀锌丝网石笼编织过程中，而纬纱的直径。
This paper introduces the weaving process of mixed-fiber product with bamboo-fiber and polyester-filament, and discussed the weaving process parameters.
介绍了竹纤维与涤长丝交织产品的织造工艺流程，并讨论了各工序工艺及工艺参数的确定。
In the weaving process, yarns should be added (or reduced) in every warp layer in correspondence with the increase (or decrease) of the fabric diameter.
在织造过程中，应随管道直径的增加(或减小)，相应地增加(或减小)各层的经纱根数。
Before weaving, the warp threads are coated with a size (a dressing) to enable them to withstand the mechanical stresses involved in the weaving process.
在织布以前，经纱上都附有一种浆，这种浆使纱线在织布的过程中能够承受织布机所造成的机械压力。
In other words, any aspects specified on the aspectpath are made available to the weaving process, just as if they were present in source form in the project.
换句话说，在aspectpath上指定的方面对编织过程是可用的，就好像它们存在于项目源目录中一样。
It is proved that the sizing device is rational in structure and stable in performance and the sizing quality can meet the requirements of weaving process.
结果表明，S432型浆纱机的上浆装置结构合理，性能稳定，浆纱质量完全满足织造要求。
The weaving process varieties and characteristics of 3d weaving machine are emphatically illustrated and the advantages of VARTM process are briefly summarized.
本文将重点阐述三维机织的织造工艺的种类及其特点，并对VARTM做简要介绍。
This article relates weaving process of far infrared fibre bed clothes, the focal point is determination of technological parameter of GA743 Type flexible rapier loom.
本文叙述远红外纤维素纤维床上织物的研制过程，重点为GA743型挠性剑杆织机上机工艺参变数的确定。
Traditional jacquard CAD system has reached a very high level in jacquard weaving process, but the image preprocessing couldn't meet the ever-increasing customer demands.
传统的纹织CAD系统在纹织工艺方面已经达到了很高的水平，但是在图像的预处理方面却难以满足客户越来越高的要求。
According to this formula, the time of changing wheel is obtained, thus the ratio of warp velocity of base and crepe axis may be controlled during the whole weaving process.
利用公式可制订调换变换牙的时间表，从而能控制整个织造过程中泡、地经纱的送经比。
Based on the features of pure cotton of extra high count fabric, this paper analyses the difficulties in weaving process and puts forward some technical measures in practice.
根据纯棉特高支织物的特点，分析了织造工艺的难点，提出了在生产实践中应采取的技术措施。
And the application of the yarn in the weaving looms were weaving, Preliminary study of the weaving process on the fabric and style of performance, as the basis for future research.
并且应用该纱线在机织织机上进行了织造，初步探讨了机织工艺对织物性能及风格的影响，为今后的研究奠定了基础。
Adhesive action of a sizing agent to a fibre is a basic concept in sizing engineering, as only warp sizing with good adhesion is able to protect warp yarns during the weaving process.
浆料对纤维的粘附是浆纱工程的一个基本问题，只有粘附性好的浆料才能有效地保护经纱。
Advanced pure cotton knitting yarn is different from other weaving yarns in weaving process, fabric structure, and fabric styles. The requirements of yarn quality have its own specialty.
由于高档纯棉针织纱在织造工艺、织物结构及织物风格等方面有别于其他机织类用纱，所以对纱线的质量要求有其特殊性。
Arranging opening time, back beam height, tension, opening Angle, drafting, reed-in reasonably were adopted in weaving process. These practice ensures no loop and enhance weaving efficiency.
织造工序要合理设置开口时间、后梁高度、上机张力、开口角度，并合理安排穿综及穿筘工艺，保证了经纱不起圈，且织造效率提高。
This paper analyses the problems in weaving process of pure ramie yarn, discusses the sizing process and brings forward a new one, which improves the sizing quality and the weaving efficiency.
本文分析了纯苎麻纱在织造加工中存在的问题，并针对这些问题提出了改进措施，制定了新的浆纱工艺路线。
应用推荐