As soon as the project was launched, the design department started experimenting with water modeling.
在项目开始时，设计部门开始对海水的模型作实验。
The influence of turbulence inhibitor on flow field in tundish has been studied by water modeling.
通过水力学模型实验，研究了中间包内流体流动的特性。
The distribution of fluid temperature in the tundish during plasma heating is investigated with water modeling.
采用水模在线加热研究等离子加热中间包流体温度的分布。
The influence of turbulence inhibitors with different structure on fluid flow behavior in tundish was studied by water modeling experiments.
通过水力学模型实验，研究了不同结构的湍流控制装置对中间包流体流动特性的影响。
The water modeling was performed by using two types of plastic particles as inclusions. The results show that the theoretical analysis is acceptable.
采用不同的模拟介质对中间包内夹杂物的去除做了研究，验证了理论分析的正确性。
In addition, a method for evaluating the flow characteristics in multistrand tundish, which can be applied to the similar water modeling study is I...
本文还提出了多流连铸中间包流动特性的评判方法，为类似的水力学模拟试验提供了参考。
In present study, a proposal to improve the inclusion floatation and temperature homogenization of molten steel is presented through an optimizing study by water modeling.
通过优化设计，提出了促进夹杂物上浮和均匀中间包内钢水温度的设计方案。
The effects of bottom blowing flow rate, top blowing flow rate and top lance level on mixed time in iron bath of smelting reduction furnace were studied with water modeling.
通过铁浴式熔融还原炉的水力学模型，实验研究了底吹流量、顶枪流量和顶枪枪位对熔融还原炉内混匀时间的影响。
And the surface velocity of molten metal in the mold was minimal at a magnetic flux density of 0.5 t, it agreed well with measured surface level fluctuations in water modeling.
施加0.5T的磁场使结晶器内金属液的表面流速最小，这一计算结果与实验结果十分吻合。
Based on the technology of rotating impeller DE gassing in aluminum alloy melt, the effect of pulse gas current on the gas bubble size by studied with the water modeling method.
在铝合金熔体净化旋转喷吹技术的基础上，采用水力模拟实验研究了脉冲进气方式对气泡大小的影响。
The effect of the ultrasonic stirring and gas stirring on the removal of inclusion was studied by the water modeling experiment under the condition of same unit stirring power in a container.
通过水模型实验，对同一容器内相同比搅拌功率条件下，超声搅拌和气体搅拌对去除夹杂物的影响进行了对比研究。
The characteristics of fluid flow in the mold with the four-port SEN of FTSC have been studied and the influence of SEN on the level fluctuation is investigated by using water modeling method.
以我公司设计的双流板坯连铸机中间罐为模拟研究对象，应用水力学模拟和数值模拟方法研究了钢液在中间罐内的流动，分析了不同尺寸夹杂物在钢液内的运动轨迹及排除效果。
The characteristics of fluid flow in the mould of two ports SEN and four ports SEN have been compared and the influences of SEN on the level fluctuation are investigated by water modeling experiment.
比较研究了薄板坯连铸用二孔型水口和四孔型水口流场特征，水模试验结果表明，采用两种水口的薄板坯结晶器流场均存在非稳定性现象。
The water modeling of five - strand billet caster tundish was carried out. The result has showed the appropriate shape of flow control devices in tundish is feasible to improve flow pattern of fluid.
报导了五流方坯连铸中间罐内流体流动状态的水力学模拟试验研究，其试验结果表明：在该中间罐内设置适当的控流装置形式对改善中间罐内流体的流动模式是可行的。
Abstract: Water modeling of the six-strand caster tundish shows that the original design of the tundish can not meet the technical requirements for inclusion floatation and temperature homogenization.
文摘：通过水力学模拟六流连铸中间包后发现，原设计的中间包在夹杂物的上浮及温度的均匀性方面还存在不足，不能很好地满足生产工艺要求。
Because atmospheres are responsible for releasing water from oceans into space, he suggests additional modeling of the interactions between the atmosphere and mantle of a young rocky planet.
因为大气层负责海洋和空间的水汽交换他建议增建大气和年轻石质星球的地幔相互作用的模型。
On design selection, exclusive design of blue bricks, through water, ball mill, modeling of complex process, the formation of historical traces and conforms to the modern aesthetic sense.
在设计选材上，专属设计的青砖，通过水洗、球磨、造型的复杂工艺，形成具有历史痕迹又符合现代人审美的质感。
The modeling of the houses and ground should had been perfect, to make it possible to reflect in the water and to seem realistic.
该模型的房屋和地面应已完善，使它能够反映水和看起来现实。
As an example, we engage in modeling process for the expelling water cell, and obtain a group of optimum technological parameters about the cell equipment.
文中以连续驱水单元为例进行了模型处理，解出了该单元的一组最优生产工艺参数。
Combining with the modeling results of thermal discharge from Chizhou and Wujing power plants, the effect of thermal discharge on hydrobiont and water quality researche.
本文结合池州电厂二期扩建工程和吴泾电厂六期扩建工程，系统地研究了温排水对水生生物的热影响和水质影响。
Soil water retention characteristics served as a vital parameter in modeling water movement and chemical transport in unsaturated soil.
土壤水分特征曲线是模拟水分和化学物质在非饱和土壤中运移的关键参数。
A combination of both poly modeling and spline modeling techniques will be used to complete the structure and the water fountain.
阿都聚建模与样条建模技术的结合将被用来完成结构和水的喷泉。
An image combining orbital imagery with 3-d modeling shows flows of what scientists believe to be water that appear in spring and summer on a slope inside the Newton crater on Mars.
一个结合了3 - D轨道成像技术的图像展示出了科学家们推测的在春季和夏季火星牛顿陨石坑的陡坡上有水的出现。
The apply of the high accuracy scheme which can model the real physical process accurately has some advantages in modeling and predicting the transfer of water temperature.
高精度格式以其高度的准确性及能反映真实物理过程等优点在准确模拟及预测水温输移扩散等方面具有独特的优势。
In many cases of regional water resources issues, when numerical method is often adopted in groundwater flow modeling lower bed level value of aquifer on each node should be given.
对于许多区域水资源问题，用数值方法进行潜水水流模拟时，需要给出每个节点上含水层底板标高值。
Attenuation, Scattering, Modeling water surface, Light shafts, Caustics.
衰减，散射，水面建模，光线束，焦散。
It indicates that the numerical modeling can reflect the status of soil moisture movement under the condition of water storage pit irrigation, and its method of solution is feasible.
说明所建立的数学模型能够反映蓄水坑灌条件下的土壤水分运动状况，其数值求解方法也是可行的。
Due to the strong spatial inhomogeneity and temporal variability of atmosphere, especially water vapor , accurate modeling of path delay in GPS signals is necessary for high -accuracy position.
由于大气分布不均和不断的变化，尤其是大气中的水汽影响，使建立无线电信号路径延迟的精确模型在GPS高精度定位中非常必要。
In many cases of regional water resources issues, when numerical method is often adopted in groundwater flow modeling, groundwater level on each node should be given.
对于许多区域水资源问题，用数值方法进行地下水水流模拟时，需要给出每个节点上地下水位值。
In many cases of regional water resources issues, when numerical method is often adopted in groundwater flow modeling, groundwater level on each node should be given.
对于许多区域水资源问题，用数值方法进行地下水水流模拟时，需要给出每个节点上地下水位值。
应用推荐