An integrated voltage reference eases design considerations.
集成基准电压源可简化设计。
Therefore, it is significant to develop a voltage reference circuitry that is compatible with digital CMOS technology and can be integrated into a system on a chip (SOC).
设计构成可复用的与通用数字电路工艺兼容的高稳定度基准电压源具有重要意义。
Except for traditional circuit requirements, programmable voltage reference requires that its voltage can be preset and regulated accurately through external digital signals.
可程控基准电压源不仅要满足传统基准电压源的所有性能指标要求，其输出电压还可通过外部数字信号来精确设定。
The circuit also USES high accuracy, low drift voltage reference to bias the platinum resistor.
该电路采用高精度低温漂的基准源为铂电阻形成静态工作电流。
A new low-voltage low-power CMOS voltage reference operating in subthreshold region is presented.
提出了一种新型的低电压、低功耗、工作在亚阈值区的基准电压源。
A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa - per.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。
A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。
The power supply voltage may be controlled by replacing D1, D2, R1 and R2 with a variable voltage reference.
将D 1、D 2、R1和R2换成一个可变参考电压源，本电路就变成了一个可控电源。
To design voltage reference and comparator with high performance is a long-term pursuit of analogy IC designers.
设计高性能的基准电压源和比较器是模拟电路工程师一直努力的目标。
The novel voltage reference source was applied to a Li-ion battery protection IC to provide various detection voltages.
这种新型电压基准电路适用于锂电池保护芯片，提供检测基准电压。
This application describes comparing two standard cells and comparing a standard cell with a precision voltage reference.
下面的应用实例说明比较两个标准电池以及将标准电池和精密电压参考标准进行比较的情况。
A low power CMOS bandgap voltage reference source with a start-up circuit is presented based on the bandgap voltage theory.
运用带隙基准的原理，提出了一种带启动电路的低功耗带隙基准电压源电路。
Current Summing is the basic method to realize low-voltage reference which is different from that of conventional voltage mode.
不同于常规电压求和带隙基准，电流求和是实现低压基准的主要方法。
A depleted NMOS transistor, which was used as current source, and a negative feedback loop constitute a stable voltage reference.
该电路采用耗尽型NMOS管作电流源器件，结合负反馈，实现了稳定的电压基准。
It is obvious that piecewise compensation current could significantly improve temperature characteristics of the voltage reference source.
分段补偿电流对电压基准源的温度特性提升效果明显。
It is a complete, monolithic ADC with an on-chip, high performance, low noise sample-and-hold amplifier and programmable voltage reference.
这是一款完整的单芯片adc，内置片内高性能、低噪声采样保持放大器和可编程基准电压源。
Design a bandgap voltage reference circuit and a voltage-modifying circuit to provide precise voltage and current reference for the referred ADC.
设计了基准电压源和电压微调电路，为adc提供参考电压和电流，而且能进行一定范围内的微调。
In this paper, a novel high precision CMOS bandgap voltage reference which USES a negative back circuit and a rc filter to enhance the PSRR is proposed.
提出了一种新颖的利用负反馈环路以及RC滤波器提高电源抑制比的高精密CMOS带隙基准电压源。
CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper, with circuit to improve PSRR and start-up circuit.
通过对低压低功耗集成电路设计技术的分析，着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源，其带有提高电源抑制比电路和启动电路。
A CMOS bandgap voltage reference with low voltage based on the bulk driven technology is designed in this paper, with circuit to improve PSRR and start-up circuit.
通过对低压低功耗集成电路设计技术的分析，着重设计了一个基于衬底驱动技术的CMOS带隙基准电压源，其带有提高电源抑制比电路和启动电路。
Thermal stability and Power Supply Rejection Ratio of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压拟制比是影响整个系统精度和性能的关键性因素。
Based on the basic principle of bandgap reference, design a high precision, high power supply rejection ratio (PSRR) and low temperature coefficient (TC) bandgap voltage reference.
基于带隙基准的基本原理，设计了一种高精度、高电源抑制比(PSRR)、低温度系数(TC)的带隙基准电压源。
Thermal stability and Power Supply Rejection Ratio (PSRR) of the voltage reference circuit are the two major factors that influence the precision and stability of the whole system.
它的温度稳定性和电源电压抑制比是影响整个系统精度和性能的关键性因素。
A series ac voltage regulator based on a new fundamental positive sequence calculation method, which is utilized to generate the compensation voltage reference, is introduced in this paper.
针对串联型交流电压调节器，提出了一种新的基波正序计算方法以获取补偿电压的参考信号。
In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。
The article analyzed and compared the type, the merits and demerits of voltage reference, pointed out the advantages of bandgap reference (BGR), and the improved configuration of BGR was chosen.
对基准源的类型和优缺点进行了分析和比较，指出带隙基准源的优点，选取了改进型带隙基准源的结构。
Voltage reference is one of the most important cells in analog circuit.
基准电压源是模拟电路中的一个重要单元。
Adjustable Precision Micropower Shunt Voltage Reference, 0.5% accuracy.
可调节精密微功耗并联电压参考，0.5%精确度。
Adjustable Precision Micropower Shunt Voltage Reference, 0.2% accuracy.
可调节精密微功耗并联电压参考，0.2%精确度。
Adjustable Precision Micropower Shunt Voltage Reference, 1.0% accuracy.
可调节精密微功耗并联电压参考，1.0%精确度。
应用推荐