The influence factors considered are as follows: the structure parameters, ALR and the viscosity of the liquid.
主要考虑了喷嘴的结构参数，气液比（ALR），液体粘度等因素对流量系数的影响。
The viscosity of the ink will influence the transfer rate of printing ink and image quality.
油墨的黏度会影响油墨的转移率和印刷图像质量。
The influence of liqUid viscosity upon a centrifugal pump's Performance curve and device resistance curve is ana-lynd.
分析了液体粘性对离心泵性能曲线与装置阻力曲线的影响。
Objective: to observe the influence of laser irradiation therapy through nasal cavity on viscosity at lower shear rates and hematocrit in the patients with AICVD.
目的：观察鼻腔内激光照射疗法对缺血性脑血管病低切粘度及红细胞压积的影响。
The influence of peptizer B on Mooney viscosity, plasticity and heat aging property of NR was investigated.
研究塑解剂B对nr门尼粘度、塑性和热老化性能的影响。
Influence of granularity distribution of quartz refractory aggregate on permeability and viscosity of EPC coating was investigated.
研究了石英粉耐火骨料的粒度分布对消失模铸造涂料的透气性和粘度的影响。
The influence of the density of minerals on the viscosity of Coal Water Slurry was researched by volume calibration.
通过体积浓度校正，进一步探讨了矿物密度对水煤浆黏度的影响。
The results show that the dispersant and its dosage not only influence the apparent viscosity but also the rheological behavior of CWS.
结果表明，分散剂的种类和用量不仅影响CWS的表观黏度而且还影响其流变特性。
In this paper, we discussed the influence of the composition of EVA resins Viscosity increasers and other additives on the properties of hot melt adhesives.
本文介绍了共聚物eva树脂结构，EVA树脂、增粘剂及其它调解剂配比对热熔胶性能的影响。
The influence of the foiling oil viscosity and rolling speed and reduction rate on the film thickness are investigated with those methods.
借此方法研究了轧制油粘度、轧制速度与压下率对轧制变形区油膜厚度的影响。
Conclusion: the amount and viscosity of HPMC significantly influence aspirin release from the gastric floating capsule.
结论H PM C用量、粘度为影响阿司匹林胃漂浮胶囊释放速率的主要因素。
The influence of viscosity, wettability, agitating rate and time on "particle gaining rate" are analysed.
并分析讨论了粘度、润湿性、搅拌速度、搅拌时间对粒子收得率的影响。
We thus meet the first effect of structure on reaction rate, an influence on the importance of solvent viscosity.
这样我们碰到了结构对反应速度的第一个影响，这种影响是以溶剂粘度的重要性为基础的。
The dispersibility, morphology and size of the gold powder particles greatly influence the properties of fired paste and viscosity.
金粉的分散性、表面形态和颗粒尺寸会影响浆料的烧成特性和粘度。
The influence of electrolytes, free polymers and deflocculating polymers on reducing viscosity and stabilizing of structured heavy duty liquid detergents and their mechanisms were also introduced.
介绍了电解质、聚合物和抗絮凝聚合物对结构型重垢液体洗涤剂粘度、稳定性的影响及其作用机理。
It has shown that TPP is an effective deformer in latex paint as well as foam inhibitor without any influence on the paint properties (e. g. viscosity, storage stability and adhesion).
试验表明，TPP是乳胶漆的有效消泡剂，也具有稳定的抑泡作用，且对涂料性能(如粘度、贮存稳定性和附着力)无明显的影响。
Further studies are made on the fluidity and rheological mechanism of acidic AP slurry, especially the influence of impurities on the viscosity of acidic slurry.
对酸性磷铵料浆的流动性及流变机理作了进一步研究。着重研究了磷铵料浆中所含杂质对酸性料浆粘度的影响。
The influence of organobentonite on sedimentation ratio, viscosity, thixotropy, film conductivity and micromorphology of the copper based conductive paint is investigated.
研究了有机膨润土防沉剂对铜系导电涂料的沉降率、黏度、触变性、涂层导电性及显微形态的影响。
The real time measurement and control of the viscosity were achieved in the preparation process of al and al alloy, revealing the rule of viscosity change as well as the influence on pore structure.
用新型旋转扭矩探测仪对铝合金熔体增粘过程中的粘度进行了实时检测和控制，研究了熔体粘度的变化规律以及粘度对孔结构的影响规律。
The influence of viscosity change on fluid percolation and development response is revealed through core flow test with fluids of different viscosity.
通过不同粘度流体的岩心流动模拟实验，揭示粘度变化对流体渗流及开发效果的影响。
Sewage has a significant effect on the viscosity of polymer and a direct influence on the oil displacement result and economic benefit of polymer-injection engineering.
污水对聚合物的粘度影响极大，直接关系到注聚合物工程的驱油效果和经济效益。
For these low melting point polyesters with different content of modifier r, the influence of temperature on viscosity of melt must be paid attention during post processing.
对于改性剂r含量不同的低熔点聚酯，在后加工时应充分考虑到温度对熔体粘度的影响。
The results have shown that diameter, gas fraction and fluid viscosity have slight impact on flow rate of this boosting system, but have remarkable influence on pressure drop of this system.
研究结果表明，管径、含气率以及流体粘度对管泵系统的流量影响不大，而对压力降则有显著影响。
The influence of JH and JHF on the viscosity and gel time of the resin in RTM as well as the volume resistivity and flexural properties of FRP are studied.
本文研究了JHF和JH型抗静电剂对RTM专用树脂粘度、凝胶时间及RTM成型FRP制品的体积电阻率和弯曲性能的影响。
Objective To use ANN to quantitatively predict the influence of the amount of HPMC and its internal viscosity on allopurinol release from HPMC sustained release tablets.
目的用人工神经网络模型定量的预测HPMC的量和其固有黏度对药物释放的影响。
The influence of the sol Mooney viscosity, the gel proportion and the accelerator type on the tensile strength of precrosslinked CR vulcanizate was studied.
研究了预交联型CR溶胶组分的门尼粘度、凝胶组分所占比例以及硫化促进剂种类对其硫化后拉伸强度的影响。
The evolution of viscosity classification of SAE J300 engine oil is explained, while main influence factors promoting the upgrading are discussed in this paper.
介绍了SAE J 300内燃机油粘度分类的沿革，阐述了促进其升级换代的主要影响因素。
The streamline pattern, the influence of the viscosity ratio on the inner and outer flow and the velocity, the pressure distribution for the inner flow are analysed in detail.
文中详细分析了流线谱，粘度比对内外流的影响以及内流的速度分布和压力分布。
During the process of converter steelmaking, the oxidbillity of slag had an direct influence on the speed of melting slag, the viscosity of slag and the extent of sputter.
转炉炼钢过程中，炉渣氧化性直接影响吹炼过程中的化渣速度、炉渣粘度、喷溅情况等。
During the process of converter steelmaking, the oxidbillity of slag had an direct influence on the speed of melting slag, the viscosity of slag and the extent of sputter.
转炉炼钢过程中，炉渣氧化性直接影响吹炼过程中的化渣速度、炉渣粘度、喷溅情况等。
应用推荐