Finally, Based the analysis of theory modal, a modal testing program has been designed according to the existing test equipments, which prepares for the next testing of the vibration and noise.
在理论模态分析的基础上，根据现有的试验设备设计了合理的试验方案，为下步的振动与噪声的试验做了必要的理论准备。
Program time delay and software filtering were used to delete the interference of the drive current and the mechanical vibration, so the measuring precision was improved.
利用程序延时以及软件滤波消除超高压汞灯驱动电流、电压、测量装置机械振动对测量结果的影响，从而提高了测量数据的准确性和稳定性。
The design program on absorption of vibration was advanced for the vibrating case from the outlet in a refinery and the unit can work properly.
针对某炼油厂压缩机出口管线振动的实际情况，提出了减振设计方案，应用后使机组恢复了正常工作。
A program is developed for structure-fluid coupling vibration.
并编制了流固耦合振动的通用程序。
Based on this point of view, a computer program to calculate the vibration of ship stern structures by using finite element method (FEM) is developed, and a sample problem is worked in this paper.
本文从这一基本认识出发，利用有限元法编制了船舶尾部结构振动计算程序，并以实船为对象进行了尾部结构振动的计算，取得了较好的效果。
Based on continuum theory, the vibration of pipeline in LPG filling stations has been analyzed by using the finite element program (SAP5) of structure analysis.
应用连续体振动理论和SAP5结构分析有限元程序，分析了液化石油气充瓶站管线振动问题。
Based on bond graph theory, the bond model of a road smoothness measuring equipment vibration has been set up, and the state equation and the dynamic simulation program established.
应用键合图理论建立了路面平整度仪振动系统的键合图模型，并推导出状态方程，编制了动态仿真程序。
Described in the paper is the solution to the problem of train perpendicular vibration by applying bond-graphs method and its relevant simulated program TUTSIM.
本文应用键图法及其相应的键图模拟程序TUTSIM解决了列车垂向振动的实际问题。
The free vibration of orthotropic clamped square plates with a circular or square hole is studied with the help of the program using the high-precision triangular plate bending element.
用高精度三角形板单元有限元程序研究多种正交各向异性材料开圆孔或开方扎夹支方板的自由振动。
Finally, by using the ANSYS program, the thermal vibration characters of the plate and missile body structures with different materials is analyzed.
最后，采用ANSYS程序分析了合金材料、复合材料的板、弹体结构的热振动特性。
The common program, which can calculate the lattice vibration for various crystals with NaCl structure type, has been made and it is applicable to cyclic or free boundary condition.
编制了氯化钠型结构各种晶体的晶格振动通用程序；它适用于循环或自由边界条件。
An optimized predicting scheme about particle vibration velocity has been put forward, a calculation model has been built, and a computer program has been tailored relevantly.
提出了一种爆破质点振速优化预测方案，建立了相应的预测模型，编写了预测模型的计算程序。
This paper, based on Self-excited vibration not taking place, introduce and probe into the method of checking the rigidity of spindle System of lathe. The program checking the rigidity is given.
本文介绍和探讨了车床主轴组件在不发生自激振动条件下的刚度校核方法，编制了校核主轴组件刚度的计算机程序。
Considering certain special characteristics in the vibration analysis of ship hull or offshore platform structure, an improved determinant search method is presented for the SAP-5 program.
本文结合船舶结构振动计算的特点，把SAP-5程序的行列式搜索法加以推广，设计出能处理和判别刚体模态、能从任意谐调频率开始计算的行列式搜索法。
A vibration measurement program is presented in this paper and analyzed from theoretical and experimental.
本论文提出了振动测量方案，并对方案进行了理论分析及实验研究。
Although approaches for the integrated passive and active vibration control (IPAVC) have been found in a lot of literatures, the program which can be used in pracitial engineering is still in short.
尽管主、被动一体化振动控制的研究已开展多年，具有工程意义的软件化工作还很少。
The seismic wave is input by way of coherent-vibration input program and program compiled by APDL.
地震波的输入，通过APDL语言编制的程序来完成，其中多点输入采用了大质量法来施加加速度。
In this paper, a method for the calculation of vibration mode in rocket motors is presented, and a corresponding program is worked out.
提出了一种发动机振型计算的方法，并编制了相应的计算机程序。
To overcome the shortcomings of steam driven hammer, such as energy wasting and serious vibration, the new type program controlled hydraulic hammers are developed.
针对蒸—空模锻锤存在的浪费能源、振动噪音大等缺点，开发了用于蒸—空模锻锤更新换代的新型程控液压模锻锤。
The simulated wind vibration loads are then applied to the time-history analysis of wind vibration response of single-layer spherical latticed shells by the finite-element program ANSYS.
将模拟出的风荷载作用于单层球面网壳，用有限元程序ANSYS进行了网壳结构的风振响应时程分析。
The structure-liquid coupling vibration problem can be solved automatically by the auto-generating liquid finite element program.
编制了流体有限元自动生成程序，使得流固耦合问题从建立模型到分析能够利用计算机自动实现。
Compile a computer program to compute the dynamic characteristics of spindle. Each natural frequency and principal mode of vibration is obtained.
编制了辗环机主轴部件动态特性分析的计算机程序，求出各阶固有频率及其主振型。
Compile a computer program to compute the dynamic characteristics of spindle. Each natural frequency and principal mode of vibration is obtained.
编制了辗环机主轴部件动态特性分析的计算机程序，求出各阶固有频率及其主振型。
应用推荐