The limit of its precision is analyzed theoretically, via simulation, and experimentally.
经由模拟，和实验式地，它的精密的界限理论上被分析。
This asymptotic result, established under the assumption that the observations are made from a strictly stationary and absolutely regular process, is also verified via simulation.
这个渐近结果，是在观测来自一严平稳且绝对规则过程的假设下建立的，并通过模拟得到验证。
By means of some known parameters of elastic launch system, the basic frequency is estimated via simulation of the vibration model, and the influence of the parameters variation on the elastomeric…
弹性体的厚度和直径与振动基频基本成线性关系，有利于弹性发射装置的尺寸设计。
Via computer numerical simulation, the fundamental diagrams of the single-speed lane and multi-speed lane CA traffic flow models are got, and these two models' traffic flow characters are presented.
通过计算机数值模拟，得到了单速车道和多速混合车道元胞自动机交通流模型的基本图，并对这两种模型的交通流特性进行了分析和讨论。
The simulation results suggest that: tracking maneuvering targets in cluttered environment with IMM-PDAF, gating via TS-MPWG is preferable to other methods.
从仿真结果可以看出，在杂波环境下用IMM-PDAF进行机动目标跟踪，TS-MPWG跟踪门优于其它方法。
By simulation and calculation, the influence of cross sustaining device to the dynamic character of bogie is basically discussed via the SIMPACK software.
运用SIMPACK动力学软件，通过模拟计算，仅就交叉支撑装置对转向架动力学性能的影响进行了初步探讨。
The CAM contour curves are reconstructed by NURBS, and a rapid reverse design method for spatial CAM follower motion specification via motion simulation is also studied.
利用NURBS实现了凸轮轮廓曲线的重构，并给出基于运动仿真实现迅速反求空间凸轮机构从动件运动规律的方法。
Then a comparison between the theoretic values and the measured values is made via FFT conversion, showing full compliance of the simulation values with the measured ones.
将理论与实测值通过FFT变换后进行比较，模拟与实测结果具有良好的一致性。
So in this thesis, the pumping threshold characteristics are studied via experiment, theoretical analysis and numerical simulation.
本文主要从实验、理论及数值模拟三方面对随机激光的泵浦阈值特性进行了一定的研究。
And it is demonstrated via analysis and simulation that this method is robust to system error and has the advantage of rapid convergence rate.
此外该算法具有收敛速度快、鲁棒性强、估计精度高等优点。通过拖曳阵和体积阵的仿真实验，验证了所提出方法的有效性和正确性。
This paper deals with the rainfall infiltration features of several types of land use via the test of simulation rainfall.
论文通过模拟降雨试验，对几种主要土地利用类型的降雨入渗特征进行了研究。
This paper sets up the model of the simulation via the analysis of the system of the Three Gorges concrete dam construction, and gives the ideas of system design and the simulation_software structure.
通过对三峡大坝混凝土施工系统分析，建立了相应的仿真系统模型，给出了仿真软件的系统设计思想及功能框架。
Thus, via the theoretical simulation and experimental result the possibility of wavefront reconstruction using the anti-calculation of Collins formula is proved.
最后，通过理论模拟及实验研究证明了使用柯林斯公式的逆运算重构波面的可能性。
Crystallization behaviors of nickel carbonate in different solutions are investigated via atomistic simulation technique.
本文采用原子模拟技术，研究了不同溶液中碳酸镍的结晶行为。
By the simulation of a sample path, and the approximation to performance potentials via neural networks based on reinforcement learning (RL), the systems optimization methods are provided.
在样本轨道仿真的基础上，利用神经网络进行强化学习仿真逼近系统的性能势，进而对系统进行优化。
Simulation tests are made to verify that the partial features of the original signal can be reserved after de noising via this method.
为了验证该方法可以在去噪的同时有效的保留原信号的特征分量，进行了模拟故障试验。
Established a lateral and vertical semi-active secondary suspension tilting train model with self-steering radial bogies via dynamics simulation software SIMPACK.
利用动力学软件SIMPACK建立了具有二系横向和垂向半主动悬挂自导向式摆式客车动力学模型。
The economic shipment dispatch plan for a specific collaborative policy is obtained via a simulation approach.
通过模拟的方法得到了在既定的合作的货物分发策略下的经济的货物分发计划。
At last it is confirmed by simulation that the mono and multi-component LFM interference imposed on PRCPM fuze can be effectively suppressed via the above method.
最后对单分量及两分量lfm干扰作用下的伪码调相引信进行了分数阶域滤波仿真实验，结果表明该方法能有效地抑制单分量及多分量L FM干扰。
The simulation model for the grid connection of offshore wind farm via VSC-HVDC based on the fixed pitch constant speed wind power generation system is established.
建立了基于定桨距恒速风力发电机系统的海上风电场直流并网仿真模型，并对风电场几种典型运行情况的并网性能进行了仿真分析。
And then, based on experiments and combined with three-dimensional full-wave electromagnetic simulation software, the frequency domain and time domain performance of the through-hole via is analyzed.
然后基于实验研究，并结合三维全波电磁仿真软件在频域和时域对通孔结构性能进行分析。
Via the method mentioned above, the generated route has the function of terrain following, terrain avoidance and threat avoidance. Simulation results are provided to illustrate the idea.
仿真结果表明，生成的航迹具有地形跟随、地形回避和威胁回避的功能。
Second: via experimental data we get the second-order system model for each control object by using least square curve simulation.
通过现场实验数据，并利用最小二乘曲线拟合算法建立被控对象各通道之间的二阶系统模型。
Second: via experimental data we get the second-order system model for each control object by using least square curve simulation.
通过现场实验数据，并利用最小二乘曲线拟合算法建立被控对象各通道之间的二阶系统模型。
应用推荐