The 4-cylinder is a 16-valve DOHC design with Toyota’s VVT-i variable cam timing system, and is rated at 179 horsepower at 6000 rpm and 172 lb-ft of torque at 4000 rpm.
4缸机为16气门DOHC（双凸轮抽）设计，配备丰田VVT-i（智能正时可变气门控制系统），最大功率179hp/6000rpm(131kw/6000rpm),最大扭矩172lb-ft/4000rpm(233Nm/4000rpm).
In this paper, the working procedure Confirmation of Control Variable and Selection of Main Components and Part of Design Schematic of tread cutting system are expressed in detail.
详细介绍了胎面裁断系统的工作过程以及控制变量的确定、主要元件的选取和部分控制回路的设计图。
The whole design of system has been described, including the hardware and the application of the CODESYS software, accordingly the variable relation of every link was deduced.
给出了总体设计方案，包括各环节变量关系的推导，系统硬件及CODESYS编程软件的使用。
And through the integrated processing for system status, the input variable of fuzzy controller was reduced to decrease the controller design difficulty.
并且通过对系统状态的综合处理，减少模糊控制器的输入变量，降低控制器的设计难度。
The design and realization of a variable thrust liquid rocket engine control system is present in this paper.
本文讨论了某型变推力液体火箭发动机数字控制系统的设计和实现。
The adjoint variable method for design sensitivity analysis of multibody system dynamics based on ordinary differential equations is presented.
基于常微分方程数学模型建立了多体系统动力学设计灵敏度分析的伴随变量方法。
Wind load is a main variable in OCS design, its right selection is very important for safety operation of OCS and economic efficiency of the system.
风荷载是接触网设计中主要的可变荷载，风速取值的正确与否对接触网的运行安全及系统的经济性至关重要。
The transfer characteristics of the flexible and variable structure cables and cabin system used in LT mechanical, electronic and optic integrated design is studied.
对大射电望远镜光机电一体化设计中悬索和馈源舱这一大柔性变结构系统的传输特性进行了研究。
The engineering design method of variable refrigerant volume air-conditioning system is described in this paper.
本文着重阐述了变制冷剂流量多联分体式空调系统在工程中的设计方法。
This paper studies the synthesis and design problem of variable structure control for a linear discrete uncertain singular system with time-delays.
研究了一类线性离散时滞广义不确定系统的变结构控制的综合与设计问题。
The law of the variable mass flow in the horizontal wellbore is useful for the horizontal well output prediction, and optimal design and dynamic analysis on oil well production system.
水平井井筒变质量流的流动规律是进行水平井产能预测、油井生产系统优化设计及动态分析的基础。
This paper presents the design of thyristor triggering circuit for a variable speed constant frequency (VSCF) wave energy electricity generating system.
介绍了变速恒频波浪能发电系统的晶闸管触发电路设计。
Around the real time expert systems time order, time variable and timing, the kernel technology to design and build this system is discussed in the paper.
本文围绕实时专家系统的时序性、时变性、时效性等特征，从系统设计与实现两个方面讨论建造该专家系统的一些关键技术。
This paper introduces the structural filter design of a variable stability aircraft control system and the ground test of structural resonance.
本文介绍变稳飞机控制系统结构滤波器设计及结构谐振地面试验。
In this paper the design of a discrete time variable structure controller (VSC) for a brushless DC motor drive (BLDCM) position servo system is introduced.
介绍了无刷直流电动机(BLDCM)位置伺服系统离散时间变结构控制器的设计方法。
In order to reduce chattering phenomenon of variable structure control, a fuzzy variable structure control method is adopted and applied in the overload control system design of anti-ship missiles.
为了削弱变结构控制中的颤振现象，采用了模糊变结构控制方法，并将该方法应用于反舰导弹的过载控制系统的设计中。
The author discusses several noticeable problems in designing air conditioning of variable refrigerant volume based on design effort, and generalizes some experience on designing this system.
作者在多年从事设计工作的基础上，讨论了可变冷媒流量空调系统设计中需引起注意的几个问题，并总结了系统设计中的一些经验。
An effective variable air volume air conditioning system is determined by exact design, installation and reliable advanced automation control.
变风量空调系统正常、有效的运行是由其空调系统的正确设计、施工和可靠、先进的控制所决定。
The simplified practical example for homing control system is given. This paper derives a new method for analysis and design of exponential variable parameter control system.
并以自动导引控制系统为例讨论了应用问题，导出对指数变参数系统分析设计的新方法。
It is introduced the basic concept, mathematical expression and design problems of the variable structure system and the application of AC motor speed adjustment system.
介绍变结构系统的基本概念、数学表达设计问题及其在交流电机调速系统中的应用。
Based on the theory of variable pole state feedback control, this paper makes the process design and implement of NC software and hardware on electro-hydraulic force servo system.
基于变极点状态反馈控制理论，对电液力伺服系统进行了数控软硬件的工艺设计及其实现。
By applying man's intelligence, a design method of intelligent variable structure stabilizer for power system was proposed on the basis of variable structure control theory.
依据变结构控制理论并运用人的智能，提出了智能变结构电力系统稳定器的设计方法。
The paper aims at a class of time delay system to design a variable structure fuzzy control. Its application to the heater in laboratory proves its effectivity.
针对一类无法用控制手段抑制超调的纯滞后系统的特点，设计了一种变结构模糊控制器，通过在实验室中电阻炉上的应用，证明了此控制器的有效性。
In this paper, the optimization design for self-adaptive control system of feed-forward neural network is proposed based on chaotic variable.
基于混沌变量，提出一种神经网络自适应控制系统的优化设计方案。
A design method of variable structure control for the d. C. servo system is proposed. Also the sliding state stability of the system is analyzed.
本文提出了直流随动系统的变结构控制设计方法，分析了系统的滑态稳定性。
First, wind turbine aerodynamics and variable pitch control process was discussed to provide theoretical studying basis for studying of the system design and control strategy.
首先对风力机空气动力学和变桨距控制过程进行了探讨，为系统的设计及控制策略的研究提供理论基础。
This paper put forward an idea of real time of indoor air quality, so as to emphasize that IAQ is a variable and comprehensive factor formed by design, construction and system running.
本文提出了实时室内空气品质的概念，是强调室内空气品质是一个变量，是设计、施工和运行管理多学科、多专业综合形成的一个量。
Based on the principles of a variable structure system a design method for the variable structure control system with a variety of reference inputs is proposed in this paper.
基于变结构控制原理，本文提出了一种变结构控制系统的设计方法，它允许多种形式的参考输入。
A design procedure with constant parameter frequency method is developed for the temperature control system with variable parameter applicable especially to thermodynamics.
提出了热工专业中特殊的变参数控制系统的定参数频率设计法，应用计算机进行了仿真计算并进行了实际系统的测试。
A design procedure with constant parameter frequency method is developed for the temperature control system with variable parameter applicable especially to thermodynamics.
提出了热工专业中特殊的变参数控制系统的定参数频率设计法，应用计算机进行了仿真计算并进行了实际系统的测试。
应用推荐