An internally mounted, solid state positioner board accurately controls valve position from open to close.
内部安装的固体状态定位器主板能够精确控制阀门从开启到关闭的各种位置。
Press A / M, out of the valve angle calibration, ether the no input signal valve position calibration process.
按下A/M，退出阀门转角标定，进入无信号输入阀门位置标定进程；
The main valve spindle incorporates an inner spindle for double regulation memory stop and valve position setting.
主阀轴配置一个内轴，适用于双重调节止动记忆和阀门位置设置。
A patented compensator automatically adjusts the valve position to hold constant outlet pressures at all flow rates.
专利补偿器自动调整阀的位置来保持任何流速下的出口压力。
Pneumatic valve position according to their channels can be divided into straight-through, three-and right-angle type.
气动球阀按其通道位置可分为直通式，三通式和直角式。
The swing check valve can also be mounted to the vertical position, provided the disc should not reach the valve position.
旋转式止回阀也可以安装在垂直位置，此时阀瓣应该无法达到阀门的位置。
Used when the valve is mounted in high or out-of-reach locations, but frequent monitoring of the valve position is required.
用于当阀门安装在高处或无法靠近的地方时，但是有需要经常观察阀门开启位置的情况。
This paper introduces the hardware design and the position control method of a valve positioner based on ARM microcontroller.
介绍了一种基于ARM的智能阀门定位系统的硬件设计和定位控制方法。
The cover, the vertical pressure meter, the valve position opening scale, the pressure gauge, the oil pressure gauge and so on.
套、立压表、阀位开度表、气压表、油压表等组件组成。 还有气动压力和阀位变送器。
In dealing with the relationship of the servo valve position control and the adaptive control, the Double-loop control is adopted.
提出了伺服阀的位置控制和颤振的控制关系上采用可切换的双通道控制形式的设计思想。
Fitting valve position feedback on manual valves now also becomes a more attractive option with the size and cost of the open solution.
现在由于开放式解决方案的尺寸和成本的优势，在手动阀上装配位置反馈也变得更有吸引力。
A control valve, the valve position of which is controlled by the pressure on the slave cylinder side of the pump, is arranged parallel to the pump.
与该泵并联地设置有一个控制阀，该控制阀的阀位置通过该泵的主动缸侧的压力来控制。
The mechanical throttle valve is electrically controlled, e. g. the valve position is under closed-loop control to the output of the pressure gauge.
所述机械节流阀受到电控制，例如阀门位置受到根据所述压力表的输出进行的闭环控制。
The Principal, Character and Specification of GFH optic fiber valve position put forward by application of Optic Fiber sensing technology is introduced.
介绍了运用光纤传感技术研制的光纤阀位回讯器的工作原理、特点及技术性能。
The result of preliminary experiment shows that the control scheme can make valve run steadily and reliably, implement precise controlling of valve position.
初步实验结果表明：所提出的控制策略能够使阀门平稳、可靠的运行，实现了阀门位置的精确控制。
Lastly, the strength of inclined-axis swirl is directly proportional to the Shadowed area of the single channel except for the S1 valve position where the in-cylinder motion is only tumble.
除具有纯滚流特点的S1阀片位置外，缸内气体斜轴涡流运动强度与单边气道截面被遮住的面积成正比。
Simulation studies show that: the method has a strong anti-disturbance ability and robust performance. This method is also available for valve position limit setting in the industrial field.
仿真结果表明该方法具有较强的抗饱和能力和鲁棒特性，同时该方法对工业现场中常见的限制阀位的设定具有一定的指导作用。
This text introduces the operation principle, valve position, velocity control, and the solution for key problems of velocity valve's control system for vertical semi-continuous casting machine.
本文介绍了立式半连续铸造机速度阀控制系统的工作原理、阀位、速度控制方式和各种关键问题的解决方法。
At first, it studied the plant model of position and force system about valve control unsymmetrical hydraulic ram.
首先，建立了阀控非对称缸位置控制系统与力控制系统的数学模型。
Stroke control mechanism for the regulation and precise control of valve opening and closing position.
行程控制机构，用以调节和准确控制阀门的启闭位置。
The disc and associated moving parts may be in a constant state of movement if the velocity pressure is not sufficient to hold the valve in a wide open and stable position.
如果流体流速压力无法将阀门支撑在一个较大的开启度并保持在稳定的开启位置，则阀瓣和相关的运动部件可能会处于一种持续振动的状态。
Reduced air pipe and valve must be foreseen into the Cargo Pump Room. The position and arrangement will be determined together.
必须提前考虑在泵舱布置压缩空气管及服务阀门，位置及布置将由双方共同决定。
Drain valve must be vented to the safe position in the atmosphere, the torch duct or discharge the container.
放净阀必须放空到安全位置-放到大气、火炬总管或排放容器中。
Top company has an experienced R & D team, implement the global unified design, unified standards, in the field of valve in the leading position in the world.
托普公司拥有一支有经验的研发队伍，实行全球统一设计，统一标准，在阀门领域内处于世界领先地位。
The flywheel marks and indentation are used for setting the valve and the ignition systems relative to prescribed position of the crankshaft.
飞轮标记与凹口可以用来确定阀门与点火装置系统的位置，其要根据曲轴的规定位置来确定。
When a cylinder with this valve configuration is in the upright position, the inlet of the tube is immersed in liquid and the liquid phase will be removed.
当带有这种阀门配置的钢瓶处在垂直位置时，管子的入口浸在液体中，就可以提取液相产品。
When a cylinder with this valve configuration is in the upright position, the inlet of the tube is immersed in liquid and the liquid phase will be removed.
当带有这种阀门配置的钢瓶处在垂直位置时，管子的入口浸在液体中，就可以提取液相产品。
应用推荐