The fracture surface of a failed injection valve nut of diesel engine high pressure oil pump was investigated by visual and SEM.
对断裂的汽车柴油机高压出油阀紧座的宏观、微观断口及显微组织进行了研究。
The straight threads of the nut engage with the mating threads of the valve outlet and are tightened to compress the gasket between the two sealing surfaces.
螺母的直螺纹同阀门排气口的配合螺纹咬合在一起并上紧，来压缩在两个密封表面之间的衬垫。
Adjustment of this union nut can compensate for wear of TFE seats, with no production loss to remove valve for internal adjustment.
这种管接螺母的调整能够弥补TFE阀座的磨损，避免由于拆卸阀门进行内部调整作带来的损失。
To order, specify description and extension length from center line of valve to top of handwheel or nut.
订购时，注明描述信息和从阀门中心线至手轮顶部或螺母的加长长度尺寸。
Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body. This is the diaphragm-retaining nut.
在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。这是横膈膜止动螺母。
The leaks can usually be fixed by depressurizing the valve outlet and retorquing the packing nut.
通常可以通过对阀门排气口减压和重新调整衬垫螺母来阻止泄漏。
Loosen and remove the diaphragm lock nut and lock washer, pressure plate and diaphragm from the valve stem.
松开和拆卸隔膜锁紧螺母和锁紧垫圈，从阀杆上往下压阀盘和隔膜。
Install the valve onto the copper tube and gently slide compression nut and ferrule up to the valve to engage.
在铜管上安装阀门，然后轻轻地把压缩螺母和套圈移到阀门上并进行啮合。
The built-in filter of a solenoid valve can be cleaned without dismantling its sleeve, but simply unscrewing its nut to pull out the plastic filtering plate.
本电磁阀自带的过滤器无需拆卸管子即可非常方便的清洗，只需用手拧下螺帽，拔除塑料滤片即可清洗。
Unscrew the nut from the service connection of suction line valve and connect the compound pressure gauge.
将真空泵连于复合压力表，打开复合压力表和真空泵对室内机和连接管抽真空。
Upon installation, a hand-tightened union nut serves to compress the face-seal of a Chemtrol valve.
在安装期间，手动紧固管接螺母用来压紧Chemtrol阀门的表面密封。
Upon installation, a hand-tightened union nut serves to compress the face-seal of a Chemtrol valve.
一旦安装完毕，手动旋紧的管接螺母就紧压着Chemtrol阀门的密封面。
Germany RBT import external thread needle valve can be equipped with stainless steel welded pipe, and pipeline butt welding connection, but also through the outer nut removing the valve.
品牌：进口外螺纹针型阀可配带不锈钢焊接管，能与管道直接对焊连接，也可通过外螺母拆卸阀门。
The valve further comprises a first guide part arranged on the adjusting nut and a second guide part matching with the first guide part.
该阀还包括设置在调节螺母上的第 一导向部分，以及与第一导向部分配合的第二导向部分。
The longitudinal fracture arosed in connecting nut for inlet flushing valve.
冲洗阀出现进水端连接螺母纵向断裂。
The upper set of wrench flats belong to the packing nut, which is threaded into the valve body.
扳手面上面的那个属于衬垫螺母，它是通过螺纹旋进阀体的。
Without removing the solenoid coil, we can easily clean the filter this solenoid valve carries just by manually unscrewing the nut, pulling off the plastic filtering disc and cleaning it.
本电磁阀自带的过滤器无需拆卸管子即可非常方便的清洗，只需用手拧下螺帽，拔除塑料滤片即可清洗。
The process see chart 7 Firstly, release the pressure of control valve, and disassemble control pipeline and loosen connecting nut before take out the actuator.
压力阀的拆装步骤见图7首先把控制阀压务释放，拆卸控制管线，松开连接执行器联接螺母，取下执行器。
Beneath the handwheel is one set of wrench flats on a nut threaded into the valve body.
在手轮下面，在一个旋进阀体的螺母上面是一套扳手面。
It is mainly made up of frame, gate board, screw pole, nut etc. Rotate the handwheel by hand, then the screw pole drives the nut gate board move in horizontal to fro to open close the valve.
主要由框架、闸板、丝杆、螺母等零件构成，用手转动手轮使丝杆带着丝杆螺母和闸板沿水平方向往复运动，达到闸门的启闭目的。
It is mainly made up of frame, gate board, screw pole, nut etc. Rotate the handwheel by hand, then the screw pole drives the nut gate board move in horizontal to fro to open close the valve.
主要由框架、闸板、丝杆、螺母等零件构成，用手转动手轮使丝杆带着丝杆螺母和闸板沿水平方向往复运动，达到闸门的启闭目的。
应用推荐