The dynamic response question of composite pavement under moving load is analyzed by using the finite-element numerical calculation method.
应用有限元数值计算方法,分析了复合路面在移动荷载下的动力响应问题。
This paper introduces a numerical analysis of semi-conductor devices by using the finite-element method combining with the coupled approach and the design of a corresponding modelling program.
本文采用有限元分析与耦合法相结合的方法对半导体器件进行数值分析,设计了相应的模拟程序;
The Maxwell stress between magnet and keeper was integral analyzed using the finite element method, and the attractive force between magnetic attachments was obtained.
通过有限元法积分作用于闭路磁体与衔铁之间的麦克斯韦应力,算得磁性附着体的固位力。
Furthermore, the fixture structure is optimized by using the finite element analysis software ANSYS.
并利用有限元分析软件Ansys进行辅助设计,对其结构进行优化。
The experimental results were used to calculate material properties, using the finite element method combined with optimization techniques.
该方法根据实测的客观物理量集成运用有限元方法和优化技术来测算材料的弹性参数。
The natural frequency of the gas column in simple pipelines was solved using the finite element analysis method. The result agreed with that derived with transportation matrix method.
采用有限元分析方法,对简单管道气柱的固有频率进行求解,其结果与用传递矩阵法求得的结果是一致的。
A modal analysis using the finite element method is carried out for a crankshaft workpiece system. Six lowest order modal 'parameters have been obtained.
本文用有限元方法对曲轴工件系统进行了模态分析,求出了前六阶模态参数。
Using the finite element methods to study the natural and linear bearing EMBR system, the inherent frequencies and modes are obtained.
采用有限元法分析滚珠轴承和磁浮轴承—转子系统,获得相应线性系统的固有频率和模态振型等动态特征量。
Because hinges need linear deformation, using the finite element software ANSYS to study the performance of the hinges, then discusses the hinges parameters' impact on linearity.
因为铰链需要线性变形,因此利用有限元分析软件ANSYS对柔性铰链进行系统的研究,讨论铰链的各个参数对其线性性能的影响。
The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.
本文利用有限元数值计算方法,系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。
Based on cutting and vibrating theories, the dynamic behavior of micro drill is studied by using the finite element method.
基于切削和振动理论,利用有限元技术对微细钻头振动钻入动力学特性进行了深入地研究。
A computer model for the mechanical response of steel bridge deck surfacing under wheel loading is established by using the finite element method.
采用有限元方法建立在车载作用下钢桥面铺装层的力学响应计算模型。
Using the finite element method, they finally obtain the displacement and stress of nodal points.
用有限元法解出最终结点位移和应力。
The study of the effectiveness of the dynamic vibration absorber in reducing harmonic response of the ship hull girder using the finite element method is presented.
采用有限元法研究了动力吸振器减小船体梁结构谐波振动响应的有效性。
The frame of a new style motorcycle named Sport Recreation Vehicle (SRV) was researched. Using the finite element mode analysis method, the vibration mode of motorcycle frame was analyzed.
以一新型运动型多功能休闲摩托车车架为研究对象,采用有限元模态分析的方法,对车架振动模态进行了分析。
This paper is devoted to solving strength and stability problems of a built structure by using the finite element method and the increment method for the geometrical nonlinear structural problem.
本文用有限元素法和对于几何非线性结构问题的增量法求解组合结构强度与稳定性问题。
In this paper, using the finite element method, we discuss the two-grid methods for two simplified models.
本文针对二维三温辐射热传导方程的两种简化模型的有限元方程,讨论了两层网格方法。
In this paper, the static analysis of Hydroplan of hydropower station engineering of Xianrendong is performed by using the finite element software of ANSYS.
本论文通过有限元分析软件ANSYS对贵州省纳雍县仙人洞水电站的厂房工程进行了结构静力分析。
The main magnetic field of Magnetic Resonace Imaging( MRI)device is simulated by using the finite element method.
采取了二维有限元法模拟核磁共振成像(MRI)装置的主磁场。
Using the finite element method, the dynamic buckling of a bar with finite initial imperfection under axial impact is analyzed in this paper.
本文用有限元方法分析了一定初缺陷杆受轴向冲击的弹塑性动态屈曲。
The stator's characteristics of vibration and input impedance were analyzed by using the finite element software ANSYS. A new decoupling method between the two vibrators was presented.
对电机的运行机理进行了分析,并利用有限元软件ANSYS分析了电机定子的振动特性和阻抗特性,同时提出了一种振子间解耦的方法。
By using the finite element method, the dynamic stress caused by vertical contact impact between bolt locking surface and barrel extension locking surface of a new rifle was studied.
采用有限元方法研究了某新型自动步枪枪机闭锁面与节套闭锁面间垂直接触碰撞的动应力。
A typical problem of a jointed rock slope has been analyzed and factors of safety against collapse have been computed using the Finite Element Method.
文中用有限元法分析了一个节理岩石边坡的典型问题,并计算出其抗破坏的安全因子。
In this paper, we performed modelling of DC resistivity sounding in tunnel using the finite element method (FEM).
本文用有限单元法对坑道内的直流电阻率测深进行数值模拟计算。
Using the finite element dynamic optimization method, a stiffer installing plate was designed, and another fixing bracket with better dynamic characteristics was developed.
把安装支架作为减振系统的一部分,应用有限元动态优化法设计出刚性增强的安装板和动态结构性能良好的安装支架来改善减振效果。
Using the Finite Element Method (FEM) and dislocation theory, we simulated the asymmetric earthquake displacement field of a vertical strike-slip fault caused by laterally inhomogeneous medium.
结合位错理论和有限单元法,对介质横向不均匀性引起的直立走滑断裂地震水平位移场不对称性进行了数值模拟研究。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法,分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律;
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律;
应用推荐