The morphology of latex is observed by using scanning electron microscope.
用扫描电子显微镜，对粒子的形态进行了观测。
Fracture surfaces and secondary cracks morphologies were observed using scanning electron microscopy (SEM).
用扫描电镜对断口及二次裂纹形貌进行观察。
The structure of the microspheres was analyzed using scanning electron microscopy, granulometer and infrared spectrum.
采用扫描电镜、粒度分析仪和红外光谱对微球结构进行表征。
The solvent resistance of modified NR was studied and the microstructure was investigated by using scanning electron microscope.
研究了改性后胶膜的耐溶剂性能，通过扫描电镜研究了天然橡胶表面改性后的表面结构。
The crystallization and microstructure of the glass were investigated using scanning electron microscopy and X-ray diffraction technique.
用扫描电子显微镜和X射线衍射技术分析了微晶玻璃析晶和显微特征。
The reason causing local surface thinning of hot rolled sheet HP265 when being stamped is analyzed by using scanning electron microscope etc.
应用扫描电镜等手段对热轧hp2 65钢板冲压时表面局部拉薄原因进行了分析。
Observation using scanning electron microscope (SEM) showed different hydraulic structures for the membrane fouling layers in the three stages.
扫描电子显微镜(SEM)观察证明M BR系统在三阶段的膜污染层具有不同的水力学结构。
The surface ultrastructure of superficial cortical fibers of senile cataractous human lenses was observed by using scanning electron microscope.
应用扫描电镜对老年性白内障晶体浅皮质纤维表面形态结构进行观察。
The observation using scanning electron microscope and transmission electron microscope show such a single hairy nanofiber looks like a tiger tail.
扫描电镜和透射电镜观察显示单根多刺的纳米纤维结构类似于老虎尾巴。
The mineralogy and microstructure were also investigated by using scanning electron microscope. Results show that carbon nanotubes are enwrapped by CSH.
用扫描电镜对碳纳米管水泥复合材料以及碳纤维改性水泥复合材料的微观结构进行了分析。
The state of beam electrode surface corrosion in 3d electrode is studied under different experimental conditions by using scanning electron microscopy (SEM).
借助扫描电镜(SEM)对不同实验条件下的三维电极主电极表面腐蚀状况进行研究。
The adhesion of Marine bacteria on three antifouling coatings based on waterborne polyurethane was studied by using scanning electron microscope and Bactoscan FC.
利用平板计数法、扫描电镜等实验研究了海洋细菌在三种水性聚氨酯防污涂层上的附着。
Xray diffraction (XRD) was used for phase identifications and texture examinations, and the surface morphology was studied using scanning electron microscopy (SEM).
X射线衍射（XRD）用于相鉴定和纹理的考试，和表面形貌使用扫描电子显微镜（SEM）研究。
The porous structure of wood samples on their cross sections was analyzed using scanning electron microscope images, and their box-counting dimensions were calculated.
通过分析木材试样的扫描电镜照片，研究了木材横纹剖面的多孔结构特征，采用盒维数法计算了其分形维数。
The structural changes of leaf surface in acclimatization and growth in field of in vitro plantlets of Sophora japonica were studied using scanning electron microscope.
用扫描电子显微镜观察了槐树试管苗在移栽驯化及大田生长过程中叶表面结构的变化。
Using scanning electron microscope observation comparison carbonization boride cermet processing surface elastic performance and processing surface deterioration level.
利用扫描电镜观察、比较碳化硼陶瓷加工表面弹性性能及加工表面变质层。
The surface structure of scales, above lateral line, below lateral live and in lateral line, of the Oreochromis aureus were observed using scanning electron microscope.
运用扫描电镜技术对蓝罗非鱼侧线上鳞、侧线下鳞和侧线鳞进行了形态结构的观察。
In this paper, hot-rolling tests, using scanning electron microscopy, TEM observation and analysis of EBSD technology, microstructure and mechanical properties relationship.
本文通过热轧试验，利用扫描电镜、TEM观察和EBSD技术等分析显微组织与力学性能之间的关系。
The opaque glass is based on silicate composition adding sodium fluorosilicate as opal agent. The morphology of opaque glass is observed by using scanning electron microscope.
乳浊玻璃以硅酸盐玻璃为基础成分添加氟硅酸钠为乳浊剂，利用扫描电镜观察乳浊玻璃的微观形貌。
This study aimed to evaluate the effect of caries removal and clinical feature with Carisolv by using scanning electron micrograph, light micrograph, shear bond strength test.
本实验对伢典化学机械去龋法进行了扫描电镜、光镜、粘结效果、临床应用等研究，以评价伢典化学机械去龋法的疗效。
The hydration properties of limestone powder in a complex binder system were studied by using scanning electron microscopy, X-ray diffraction and energy dispersive spectrometer.
用扫描电镜、X射线衍射和能谱技术研究石灰石粉在复合胶凝材料中的水化性能和水化产物。
Chip behaviors were analyzed using scanning electron microscope(SEM), to study the effects of applied load, scan cycles and scanning direction on nanomachining of Al and Cu samples.
应用光学显微镜和扫描电子显微镜对加福煤粉燃烧过程中微观形态的变化规律进行了详细的观察。
Suspended particulate matters in water environment collected from western Xiamen Bay were analyzed using scanning electron microscope(SEM) and energy dispersive X-ray spectroscopy(EDS).
利用扫描电子显微镜和X射线能谱仪对在厦门湾采集的水体悬浮颗粒物进行形态观察和X射线能谱微区元素分析。
The fracture morphology of PC, PA6, LDPE is analyzed by using scanning electron microscopy (SEM), and the fracture cause, fracture process and fracture morphology are discussed respectively.
利用扫描电子显微镜观察分析了聚碳酸酯、尼龙6、低密度聚乙烯的微观断裂行为，并对其断裂起因、断裂过程及断裂形态进行了讨论。
Influence of CO2 partial pressure on corrosion scale of P110 steel in stimulated oil field environments was investigated by using scanning electron microscopy(SEM) and x-ray diffraction(XRD).
利用高温高压釜设备辅以失重法、采用扫描电子显微镜（SEM）和X射线衍射（XRD）技术，研究了在动静两种状态下CO2分压对P110钢腐蚀产物膜的影响。
In addition, the composition of bright Sn-Bi plated layer is analyzed using scanning electron microscope and X-ray energy spectrograph. The result shows Bi content is 1% and Sn content is 99%.
此外采用扫描电镜、X射线能谱仪对锡铋光亮镀层的成分进行分析，结果表明铋含量为1%，锡含量为99%。
To measure morphology and structure of nanotubes and nano titanium dioxide powder by using scanning electron microscopy, transmission electron microscopy, X-ray diffraction and BET instrument;
运用扫描电子显微镜、透射电子显微镜、X射线衍射仪和比表面仪等测试手段对二氧化钛纳米管及纳米粉体的形貌、结构进行表征；
The black abstract material which sticks to inside crack of the sample machined by wire-electrode cutting is analyzed and studied by using scanning electron microscope and X-ray energy spectrometer.
应用扫描电镜及X射线能谱仪等设备，对采用线切割制取的裂纹样品内表面的黑色不明物进行了分析。
The black abstract material which sticks to inside crack of the sample machined by wire-electrode cutting is analyzed and studied by using scanning electron microscope and X-ray energy spectrometer.
应用扫描电镜及X射线能谱仪等设备，对采用线切割制取的裂纹样品内表面的黑色不明物进行了分析。
应用推荐