By using numerical simulation, this paper forecasts the interior ballistic performance of a gun.
通过数值模拟，预测该炮的内弹道性能。
The braid river sand body geometry shape could be forecasted by using numerical simulation method.
利用砂体沉积过程数值模拟方法可以预测辫状河砂体的几何形态。
Method Steam injection development and well pattern of horizontal Wells were studied by using numerical simulation.
方法利用数值模拟方法，对水平井注蒸汽的开发、布井方式等进行研究。
We studied the effect of particle impacting-angle on development of aeolian ripples using numerical simulation method.
采用数值模拟的方法研究了沙粒冲击角对风成沙纹形成过程及其形态特征的影响。
We studied the effect of particle impacting-angle on development of aeolian ripples using numerical simulation method.
风成沙纹的数值模拟研究已取得了不少进展，但各家所采用的模拟方法及模拟结果存在不少差异。
Furthermore, the research approaches were also given by using numerical simulation method and experimental simulation method.
还提出采用数值模拟与实验模拟相结合对该模型进行求解的研究思路。
The effects of technical factors on melting process of ferrosilicon in liquid iron are studied by using numerical simulation.
用数值模拟方法研究了工艺因素对硅铁在铁液中熔化过程的影响。
In this paper, the stability of the inclined stope in CanZhuang gold mine is discussed by using numerical simulation methods.
本文用数值计算的方法对蚕庄金矿倾斜矿房的稳定性进行了分析，其结论对矿山生产是有价值的。
It is very important to establish effective reaction kinetic mechanism by using numerical simulation of turbulent combustion.
湍流燃烧数值模拟中建立有效的反应动力学机理是非常重要。
Using numerical simulation method, the forming process of joint tray was simulated, and its tradition technology was optimized.
运用数值模拟方法对连接盘的成形过程进行模拟，对其传统工艺进行优化。
Many known conditions are required when using numerical simulation, physical simulation, pure experimental correlation method and so on.
用数值模拟、物理模拟和纯经验相关法等需要大量的已知条件。
The effect of the blocked spouts on the performance of an attitude control rocket motor was analyzed by using numerical simulation and test.
通过数值模拟和试验研究，分析了喷口遮挡对姿控火箭发动机性能的影响。
The feasibility of counterflow scheme is validated by research on the internal aerodynamic characteristics of nozzle using numerical simulation.
利用数值模拟的方法，通过对逆流方案中喷管气动性能的研究验证了逆流推力矢量方案的可行性。
The influence of detailed configuration of Tubular K-joint on its fatigue behavior is investigated using numerical simulation analysis in this paper.
本文主要针对海洋结构物中的典型局部结构——K型管节点局部结构进行数值模拟分析，考察局部结构型式对其疲劳行为的影响。
Using numerical simulation software, with setting different gas pressure in pipe, the pressure loss coefficient of inner-cone flowmeter was simulated.
利用数值模拟软件，通过改变管道内气体的压力，对内锥流量传感器的压力损失系数进行模拟研究。
Full detail knowledge during forming process can be given by using numerical simulation, which could support for process design and dies optimization.
利用数值模拟方法，可以明确整个成形过程的全部细节问题，为工艺设计和模具优化提供强有力的支持。
Using numerical simulation method, the retrograde condensation saturation variety and the development effect of the single well dry gas injection is studied.
应用数值模拟技术，研究地层中反凝析液饱和度的变化规律和注干气吞吐技术的开发效果。
This paper studies the reasonable well pattern density, well pattern infill time, well pattern types and economic evaluation etc. using numerical simulation.
采用数值模拟对孤岛油田合理井网密度、井网加密时机、井网类型以及经济评价等方面进行了研究。
The mathematical model experimental study about velocity field in a car-bottom heat treating furnace is carried out by using numerical simulation technology.
利用数值模拟技术，对台车式热处理炉的速度场进行了数学模型实验研究。
Using numerical simulation, the fitting error is calculated in the adaptive optics phase compensation for turbulent effect of laser propagation in the atmosphere.
报道了利用数值仿真方法对自适应光学系统补偿激光传输湍流效应中的波前拟合和复原误差的计算分析。
If this kind of problem can be solved using numerical simulation, it not only can do some research on those flow structure, but can save manpower, budget and time.
如果能够很好的利用数值模拟解决这类问题，不仅可以很好地对这些水流流动结构进行研究，同时相对于试验来说可以节省人力、财力和时间。
Using numerical simulation software, the paper analysis the influence of secondary air to the pollutant discharged in high temperature and low oxygen air combustion.
利用数值模拟软件分析了二次空气对高温低氧空气燃烧污染物排放的影响。
A study is carried out on a hypersonic inlet with rectangular-to-circular shape transition and forebody using numerical simulation and high enthalpy wind tunnel test.
对一种带前体的高超声速矩转圆形进气道开展了数值仿真及高焓脉冲风洞试验研究。
Using numerical simulation results, basic parameter of fiber laser was analyzed and demonstrated, and which is the theoretical basis for optimized design of fiber laser.
利用数值模拟结果对光纤激光器基本参量进行分析和论证。为光纤激光器的优化设计提供理论依据。
Shaped mould is the important part of extrusion die for injection moulding. The cooling process of shaped plastic in shaped mould was studied using numerical simulation.
定型模是挤出模具的重要组成部分，采用数值模拟方法研究定型模内塑料异型材的冷却过程，可以指导定型模冷却系统的设计。
The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.
建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。
The quench model under the condition of conduction cooling system was established and the quench propagation properties were studied by using numerical simulation method.
建立了导热冷却条件下的超导带失超模型，用数值模拟的方法来研究超导带的失超传播特性。
应用推荐