The influence of transition metal ions on the cloud point temperature of aqueous PEGwas investigated by using laser method.
介绍了不同类型的过渡金属离子的大二环笼状配合物合成方法的研究进展 。
Some hospital without treatment may use frozen or laser, the method for the treatment of hemangioma is now using less, because of the treatment of hemangioma thoroughly also very easy to keep scar.
有一些没有治疗条件的医院可能会运用冷冻或者激光，这些方法对于血管瘤的治疗现在运用的也比较少了，因为对血管瘤的治疗不彻底也非常容易留疤。
The blade shape was measured using non contiguously method of laser projection.
作者采用激光投影法实现叶片型面的非接触全型面测量。
Last, computer simulation study of the interaction disciplinarian of laser and myocardium tissue has been made by using computer simulate experiment study method.
最后，利用计算机模拟实验研究的方法对激光与心肌组织的作用规律进行了计算机模拟研究。
This paper described a new method for fast detecting the straightness of long guideways using a scanning laser beam.
本文介绍一种长导轨直线度激光扫描快速测量的新方法。
The paper produces a new method of oil-position measure using infrared laser, and designs relevant measure system.
提出了一种利用红外激光进行油位测量的新方法及相应的实验室测量系统。
It also involves the design method, principle of two-frequency laser gauge meter and the result of verifications of standard devices using the gauge.
并介绍了双频激光同轴量规计的设计方法、工作原理及利用它对标准件定标的情况。
A method for direct measuring the frequency of a free electron laser using AC Josephson effect is presented.
提出一种利用交流约瑟夫森效应直接测量自由电子激光频率的方法。
Based on the theory of Fraunhofer diffraction and Babinet principle, a method is proposed for dynamically measuring fine-wire diameter using laser diffraction.
基于夫琅禾费衍射理论和巴比涅互补原理，提出了利用激光衍射对细丝直径进行动态测量的方法。
A measuring facility has been designed by using the principle of laser scattering method, and the concrete measuring method for primary and secondary water droplet being given.
采用激光散射法原理设计的测量装置测量蒸汽湿度和水滴直径，并且给出了一次水滴和二次水滴的具体测量方法。
This thesis mainly introduces optical antenna arrays and coding method of laser warning system using optical fiber front end technology.
本文主要分析采用光纤前端的光学天线阵列激光告警器结构原理，以及其方位识别方法。
P-type semiconductor zinc oxide films, process for preparation thereof, and pulsed laser deposition method using transparent substrates.
型半导体氧化锌薄膜，其制备方法，和使用透明基片的脉冲激光沉积方法。
Moving object coordinate measurement is performed using laser tracking measurement system (LTS) that is based on spherical coordinate method.
在球坐标激光跟踪测量系统中采用球坐标法可将空间运动物体的三维坐标求出。
The pump power distribution in the single diode directly pumped laser rod with different pumped parameters is simulated using the method of ray trace.
采用光线追迹法模拟计算出单个二极管在不同抽运参数下直接抽运激光棒时，激光棒所吸收的抽运光功率的分布。
The statistical properties of non-harmonic oscillators' laser excitation are discussed by using Lie algebraic method.
应用李代数方法讨论了非简谐振子激光激发的统计性质。
A numerical simulation was performed to calculate temperature and stress distribution in K9 glass sample irradiated by pulse CO2 laser using finite element method.
利用有限元法对脉冲CO2激光辐照K 9玻璃样品中的温度和应力分布进行了数值分析。
Single pass laser surface of the specimens using powder feeding method were obtained by varying the powder feeding rate and the preheating temperature of the substrate.
通过改变送粉激光熔覆过程中的扫描速度、送粉速率、基体预热温度等工艺参数，获得了单道激光熔覆层。
According to the weakness of laser alarm and jamming, a alarm and jamming method against laser guide weapon using Brillouin enhanced Four-wave mixing is proposed.
针对现有的激光告警和干扰方法的缺点，提出了利用布里渊增强四波混频法实现对激光制导武器一体化告警和干扰的方法。
The motion equation satisfied by an induced polarization of a two level atom interacting with laser pulse is derived by using a nonperturbation method.
通过非扰动方法导出了与线偏振激光脉冲相互作用的二能级原子的诱导极化所满足的运动方程。
Using statistics analysis method, diode laser failure states were classified and the causes of these diode laser failures were analyzed in every packaging process.
利用统计分析手段，对高功率二极管激光器封装中各工艺环节引起器件失效的原因进行了分析和归类。
We have determined the pulse shape asymmetry in a synchronously pumped dye laser using the method of spectrum-resolved SHG correlation.
我们用光谱分辨的二次谐波方法测定了连续波同步泵浦染料激光脉冲形状的非对称性。
By using this method, the technique of laser cut - ring LCD glass substrates is studied both in fracture mechanism and experiment.
采用该技术，从断裂基理和实验验证两方面对激光切割液晶显示玻璃基片进行了一定的研究。
According to the RKR theory, the fairly accurate small-signal gain in the co -laser operating is calculated using the numerical method in this paper.
本文根据RKR理论，彩用数值方法比较精确地计算了一氧化碳分子激光器的小信号增益系数。
The principle of paper thickness on-line measurement using displacement differential method based on laser displacement sensor and electric eddy current displacement sensor is introduced.
介绍了基于激光位移传感器与电涡流位移传感器的位移差动法在线检测纸坯厚度的原理及测量系统的软硬件设计。
This paper reports that the frequency responses of a direct-modulated DFB laser diode can be improved using an injection locking method.
验证了通过注入锁模方法，分布反馈(DFB)半导体激光器的频率响应可以得到明显的改善。
This method is realized by using laser grating shearing interferometer and Talbot effect.
这种方法是利用激光光栅剪切干涉仪和塔宝效应实现的。
A new collimating method for semiconductor laser array using binary optical elements is described in the paper and a binary beam collimator is designed and manufactured.
阐述了二元光学元件用于半导体激光器列阵准直的新方法，并设计制作了二元光学准直器。
A new method to detect laser mode by using half-tone processing technique is presented.
本文提出了利用半色调处理技术检测激光器模式的新方法。
A new method to detect laser mode by using half-tone processing technique is presented.
本文提出了利用半色调处理技术检测激光器模式的新方法。
应用推荐