This implementation accesses the usb devices through the virtual usb device file system (usbdevfs).
这个实现通过虚拟usb文件系统(usbdevfs)访问usb设备。
Because the device descriptor read from the adapter during enumeration matches the information registered by the hci_usb driver with the usb core, this driver gets attached to the Belkin usb device.
因为在枚举期间从适配器读取的设备描述符与hci_usb驱动程序注册到usb核心的信息相匹配,所以这个驱动程序可附加到Belkin usb设备。
The normal procedure for accessing a USB device with the JSR-80 API is as follows
用JSR-80API访问USB设备的正常过程如下
A USB device may have one or more configurations, which are described by their corresponding configuration descriptors.
一台usb设备可以有一个或者多个配置,这由它们相应的配置描述符所描述。
Furthermore, a USB device might also have string descriptors to provide additional information such as vendor name, device name, or serial Numbers.
并且一台usb设备可能还有字符串描述符以提供像厂商名、设备名或者序列号这样的附加信息。
Not permitted to open the USB device, check usbfs options.
不允许打开USB设备,检查USB系统参数。
Chapter 4 introduces the USB device drivers layered architecture.
第四章对usb驱动程序体系结构进行了介绍。
Based on WDM drive programming thinking, give an example of USB device drive.
基于WDM驱动程序思想,给出了USB设备驱动程序的编程实例。
Sometimes clicking "Safely remove USB device" button can't remove USB storage safely.
有时候点击“安全移除USB设备”按钮不能安全移除USB存储器。
The USB host controller is connected to a USB device comprising one or more end points, and comprises a buffer.
USB主机控制器连接到包括一个或多个端点的USB设备,并且包括缓冲器。
When you click Safely Remove Hardware in Windows XP, the power indicator turns off and the USB device powers off.
当你在xp系统中点击安全删除硬件时,指示灯熄灭,USB设备停止工作。
The feature of USB, firmware design of USB device, driver design and application design are emphatically described.
着重论述了通用串行总线(usb)的特点,以及USB设备的固件程序设计、驱动程序开发和上层应用程序的开发。
USB driver stack architecture and the method of how to communicate with a USB device in application are also analyzed in this paper.
对usb驱动程序堆栈结构和应用程序如何与usb设备通信的方法进行了简要分析。
There are a lot of interfaces in personal computers currently. USB device has the advantage of PnP, auto configuration and high speed.
目前在微机上存在多种接口形式,USB设备能够即插即用,自动配置,有较高的传输速率。
The Flash Backup image of your USB Flash Drive or MP3 player can then be restored back to the same device or copied to another USB device.
您的USB闪存驱动器或MP3播放器的闪存备份映像就可以恢复到同一设备或复制到另一个USB设备。
After analyzing the USB Device Controller function requirements, the thesis divides the system into several sub-modules by the way of TOP-DOWN.
在对usb设备控制器的功能进行详细的分析后,采用自顶向下的方法划分系统模块。
This thesis introduces the design of USB2.0 IP CORE for USB device controller, and mainly about the design of the main controller of the IP CORE.
本文介绍一种USB2.0设备控制芯片IP核的设计,并且主要对其中的主控制器的设计进行介绍。
USB device Tree Viewer is designed to provide you with fast access to information concerning the USB host controllers and devices connected to your computer.
USB设备树查看器的设计为您提供有关连接到计算机上的USB主机控制器和设备的快速访问信息。
A given USB device may have many endpoints, and the number of data pipes between the host and the device is the same as the number of endpoints on the device.
一个给定的USB设备可以有许多个端点,主机与设备之间数据管道的数量与该设备上端点的数量相同。
Each USB data transfer is initiated and controlled by the host. Every USB device can only connect to the host and can not communicate with each other directly.
在usb规范中任何一次U SB的数据传输都必须由主机来发起和控制,所有usb设备都只能和主机建立连接,任何两个外设之间或是两个主机之间无法直接通信。
USB Safely Remove is a USB device manager. It saves time and extends user abilities on active work with flash drives, portable drives, card readers and other gadgets.
USB安全删除是一个USB设备管理器。它可以节省时间方便你使用闪存驱动器,便携式硬盘,读卡器和其他设备。
The implementation described in this chapter is not required. This implementation is provided as an example to illustrate the host system behavior expected by a USB device.
本章所涉及的具体实例部分只是作为例子,以阐述主机系统响应usb设备请求的行为。
Then, emphasize the development and design of USB device, among them include primarily; The design of USB hardware, the development of the firmware, the development of USB device driver.
然后,着重介绍了USB设备的设计和开发,其中主要包括:USB硬件设计,固件程序的开发,USB设备驱动程序的开发。
In this paper, according to the design targets and based on the USB system architecture, the system is detailed introduced from three points of view: hardware, software and USB device driver.
本文围绕设计目标,在简要叙述usb系统体系的基础上,从硬件、软件以及usb设备驱动程序三个方面对系统做了详细介绍。
A bar appears to indicate the progress of the install. Once the installation is complete, remove the CD, restart your computer and set your boot Menu or System BIOS to boot from your USB device.
出现进度条指示安装的进度,一旦安装完成,移除CD,然后重启电脑,并且设置启动菜单或系统BIOS从USB设备引导。
The last part introduces some key data structures first, and then the functions that operate over Data Gate and USB device, and finally the multithread technology adopted in the application program.
在应用程序开发部分,先引入核心的数据结构,接着分别介绍了对数据网关和USB设备的操作,最后介绍了应用程序采用的多线程技术。
A method of direct Universal Serial Bus (USB) device access in virtual environment was proposed, and a model of direct device access and work flow based on QEMU were designed.
提出一种在虚拟化环境下直接访问usb设备的方法,并基于QEMU设计实现了虚拟机直接访问真实设备的系统模型及相关流程。
A method of direct Universal Serial Bus (USB) device access in virtual environment was proposed, and a model of direct device access and work flow based on QEMU were designed.
提出一种在虚拟化环境下直接访问usb设备的方法,并基于QEMU设计实现了虚拟机直接访问真实设备的系统模型及相关流程。
应用推荐