The upper computer software with good man-machine interface is developed using VB6.0.
采用VB6.0开发了具有良好人机界面的上位机软件;
The system includes the upper computer software, the MCU circuit, the driver and the step motor.
该控制系统包括上位机控制界面、单片机控制电路、驱动器以及步进电机。
Data analyzing, processing, curve drawing and tendency forecasting are finished by the upper computer finally.
数据的分析、处理、绘制曲线以及趋势的预测最终由上位机完成。
The upper computer communicating with the scale model ship through a pair of RF transmitters, is placed on the shore.
上位机采用笔记本电脑,放置于岸边,用一对射频收发器与船舶缩尺模型进行无线通信。
The lower computer receives the experimental control parameters from the upper computer, and realizes remote experimental operation;
下位机接收上位机系统下达的实验控制参数,实现远距离实验操作;
The upper computer could be used for real-time control of some key parameters by GUI.
上位机控制台提供图形界面可以实现关键参数的实时调控。
Software design can be divided into the upper computer part and the lower computer part. The whole program is developed by C language.
本装置的软件设计也包括上位机和下位机两部分,应用C语言完成两部分的程序开发。
The system used the real-time monitoring work state of the upper computer, and set up security protect measures and fault processing function.
系统利用上位机实时监控工作状态,并设置了安全保护措施和故障处理功能。
The communication with the upper computer was realized through PCI bus, DSP and CPLD was used to achieve motion control of manipulator's joints.
控制器通过PCI总线与上位机通信,采用DSP和CPLD完成了运动控制功能,实现了机械手关节运动的伺服控制。
The main function of the MODEM communication module is to transmit the acquired data to the upper computer by the serial communication of RS-232C.
MODEM通信模块的主要功能是将采集到的数据通过RS - 232c串行通信传送给上位机。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
Finally, the software of the system was programmed, including the non-real-time software of upper computer and the real time software of lower computer.
最后编写了整个系统的软件部分,包括上位机非实时性软件和下位机实时性软件部分。
Based on the analysis and study on different interface modes of the upper computer, a kind of intelligence interface technology method has been put forward.
通过分析和研究上位机各种接口方式,提出了一种智能化接口技术的实现方法。
The acquisition system is composed of 8051 Single Chip which controls transmitting and accepting Ultrasound, and to use RS232 as a message channel to upper computer.
该采集系统采用8051单片机控制超声波的发射与接收,采用RS232与上位微机通讯。
This paper proposed a novel control method for implementing the tread winding of OTR tire, which features the central role of the upper computer in manufacturing process.
本文提出了一种以上位机为核心,充分利用上位机强大的运算能力和编程的灵活性来实现工程轮胎胎面仿形缠绕控制的方法。
Experimental raw data can be derived from the simulation data of the upper computer software, the recorded wave data and many kinds of data generated by protection tester.
实验原始数据可来源于上位机模拟的数据、现场录波数据和由保护测试仪产生的多种模拟数据。
The system software included upper computer system software and lower computer system software. Method of structural module was adopted in the design of the system software.
系统软件包括上位机系统软件和下位机系统软件,软件的设计采用结构化模块设计方法。
Wireless transmission between the data acquisition card and the upper computer is realized through the substitution of a couple of wireless data transmission modules for cables.
振动数据采集系统利用—对无线数传模块取代电缆线,实现了数据采集卡与上位机之间命令和数据信号的无线传输。
The system consists of upper computer software, RS232-485 converter, every kind of modules and cables. And finally the monitor program is designed with the sequential query mode.
系统包括上位机软件、RS232—485转换器、分机模块及电缆连接4部分,其监控程序的设计采用顺序查询的方式执行主程序。
Designed stepper motor driver application circuit and Single Chip Microcomputer control circuit, and compiled the SCM procedures, finished to communicate with the upper computer.
设计了步进电机驱动应用电路和单片机控制电路,并编写单片机程序,完成与上位机通信。
The software of this system is composed by the upper computer software and the lower computer software; this paper develops the lower computer software and applies modularization design.
系统软件分为上位机软件和下位机软件两个部分,文中对下位机软件进行了开发,采用了模块化设计。
Accurate steering function has been achieved by controlling the steering operator depending on the instructions from the upper computer (that is, the computer for automatic drive control).
它能够根据上位机(自动驾驶控制计算机)下达的转向指令控制转向执行机构实现准确的转向功能。
Optical cable is applied to communicate between measurement system near transformers and upper computer in main controlling room in order to improve reliability of monitoring system itself.
利用光缆传输系统实现变电站主控制室的上位机与现场的测量系统之间的通讯以提高系统整体抗干扰能力和信号传输的可靠性。
The upper computer is based on the PC104 bus embedded industrial control computer to achieve the functions of statistical analysis, parameters setting, storing, displaying and communicating.
上位机采用基于PC104总线的嵌入式工业控制计算机,以实现数据的统计分析、参数设置、存储、显示、通信等功能;
A reconfigurable embedded NC system is studied. As linked with an upper computer with grid middleware and toolkits, the system can be considered as a reconfigurable node in the manufacturing grid.
提出了一种可重构的嵌入式数控系统,通过与安装有网格中间件和网格支持工具的上位机相连,可以很方便地作为制造网格的一个可重构节点。
The system consists of an upper-computer display, a lower-computer execution control as well as an upper-lower computer communication.
该系统由上位机显示控制、下位机执行控制、上下位机通信三部分组成。
The system consists of an upper-computer display, a lower-computer execution control as well as an upper-lower computer communication.
该系统由上位机显示控制、下位机执行控制、上下位机通信三部分组成。
应用推荐