Generally speaking, a truck model includes three submodels of trip generation, trip distribution, and trip assignment.
卡车模型一般由出行发生、出行分布和出行分配这三个子模型组成。
All learning materials will be included with the course including 3d scenes and a very detailed 3d truck model which will be used in dynamics simulation.
所有的学习资料，包括三维场景和一个非常详细的三维卡车模型，将被用于动力学模拟。
The HFC (hydrofluorocarbon) refrigerant currently used in virtually every American model car and truck, HFC-134a, has a GWP of 1, 400 compared to the new refrigerant's (HFC-1234yf) GWP of just four.
事实上，目前几乎每辆美国汽车和卡车都采用了氢氯氟化碳（hydrofluorocarbon）制冷剂。 与全球变暖潜力值为1400的HFC-1234yf款相比，HFC-134a 款采用的新型制冷剂全球变暖潜力值仅有4分之差。
The model can educe a number of system performance measures at equilibrium, such as vacant truck movements, given customer O-D demand pattern.
在给定需求结构下，该模型可以确定一些系统平衡时的性能参数，诸如货车等待时间等。
The mathematic model of oil-gas spring nonlinear stiffness and damping characteristic of a construction truck is created and introduced into the vehicle model.
推导并建立了某工程车辆油气弹簧的非线性刚度和阻尼特性的数学模型，并将其导入到车辆模型中。
Based on the modal test results of truck cab, the finite element model for dynamic analysis of the truck cab was modified.
本文利用货车驾驶室的测试模态参数来修正其有限元动力分析模型。
The Hummer buyer would contract to build the H3 model SUV and the H3T pickup truck at GM's plant in Shreveport, Louisiana, through at least 2010.
悍马买家将合同建立H 3模型SUV和H3T皮卡在通用汽车的工厂什里夫波特，路易斯安那州，至少2010年。
The Open Pit Coal Mine truck optimal dispatching decision method is discussed in details in the article, the shortest route model, coal and rock goods current allocation model are built up.
本文详细讨论了露天矿卡车优化调度的决策方法，建立了最短路网络模型，煤岩货流分配模型。
With modern CAD method and smart skill of making mesh used, finite element(FE) model is established and the problem of structure of heavy truck body and large dimension are solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效地解决矿用汽车货箱结构和尺寸庞大的问题。
The comprehensive evaluation model of Unascertained mathematics is set up to settle the selection of mine truck which belong.
矿用汽车选型属于典型的未确知信息综合决策问题，适用于建立未确知数学综合评价模型。
The PTO mounting pad is a standard SAE design, regardless of the make or model of the truck.
越来越多的动力输出轴垫是一个标准的SAE的设计，无论品牌或型号的卡车。
In the paper, a control theory model of truck dispatch system has been constructed for mineral quality control.
本文应用最优控制的理论建立了以矿石质量控制为目标的卡车调度系统的数学模型。
The mathematical model of the lifting mechanism kinematics of the underground dump truck is established with the plural vector and the feature of the lifting mechanism is analyzed.
采用复数向量法建立了地下运矿车举升机构运动学的数学模型，分析了该举升机构运动的特点。
This paper describes a truck real-time truck dispatching model for the strip mines, based on the truck flow saturation of the programming.
提出了一种以车流规划目标流率饱和度为基础的露天矿卡车实时调度模型。
With Arne he climbed into an ancient, wheezing model-T utility truck.
他和阿纳爬上了一辆旧的呼哧呼哧直响的T型通用货车。
A general mathematical model of excavator truck Optimal fit in Open pit mines is derived. An Optimal fit computation is taken as an example of the mine of Emei Cement Plant.
本文推导了一般露天矿山铲—车优化配置的数学模型表达式，并以峨眉水泥厂矿山为例进行了优化配置计算。
First, the simplified model of the pick-up truck body and the computational domain ware set up, the grids ware divided accordingly.
首先，构建三维皮卡车模型，确定计算区域，对计算区域进行网格划分。
This article studies based on light truck driver axle of QX1060, discusses in detail from the UG software parametric modeling, establish of ANSYS FEM model, and the boundary conditions imposed, etc.
本文以轻型载货汽车驱动桥壳为研究对象详细论述了从UG软件中的参数化建模到ANSYS中有限元模型的建立、边界条件的施加等研究。
The breakdown of the HW32-2 hydraulic pump of the dumping system causes a model 5511 Kamaz dump truck to be out of service.
由于自卸系统的HW32-2型举升液压泵损坏，造成一台卡玛兹5511型自卸汽车无法使用。
The mathematic model of container truck path is established and the allocation algorithm for container truck is presented.
分析影响集装箱码头前沿生产的因素，建立集卡路径的数学模型及其调度算法。
Considering the influence of suspension frame on the dynamic characteristics of truck frame, the geometric model and finite element model of truck frame and suspension frame system were established.
考虑到悬架对车架动态特性的影响，建立了车架及悬架系统的几何模型和有限元模型。
This paper describes the causes, appearance and remedy of fractured fastening bolts in driven bevel gear of TATRA model T815 truck rear axle.
介绍了太脱拉T815型汽车后桥从动圆锥齿轮联接螺栓发生断裂的原因、现象和解决方法。
The design of the 15 DOF full vehicle open loop control model for the DKC12 underground dump truck is built by ADAMS in this paper.
利用机械系统分析软件ADAMS建立了15自由度的DKC12地下自卸汽车整车多体系统开环模型。
And at the same time, according to the simulation analysis of the overall model, choose the best plan of railway operational model, and give the best number of container truck.
同时根据整体模型的仿真分析，选择最优的铁路作业模式方案，并给出了集卡最佳配置数量。
The system design and technical parameters of model XZC35 25 workover cementing truck are introduced.
介绍了XZC35 -25型修井注灰车的设计方案、技术参数和主要系统设计。
This thesis talked about a new marketing and business model established by E-sales in Chinese heavy truck marketing.
本文探讨的主要问题是在国内重卡营销市场中建立起网上销售这种新型的电子商务营销模式。
Briefly describes the structure and major technical properties and parameters of MODEL LCZ3 one stage building machine for all steel radial truck tire manufactured in China.
简要叙述了国产LCZ3型全钢丝载重子午胎一次法成型机的结构及主要技术性能参数。
The results showed that the model is feasibility and accurate, and the dynamics simulation can provide reference for overall design and test. method improvement of truck-mounted howitzer system.
该动力学仿真可为车载炮总体设计和试验方法改进提供参考。
The utility model has the advantages of simple structure, and easy assembly and maintenance, and moreover, the cost of a truck frame and a suspension system can be lowered.
本装置结构简单，可大大降低车架及悬挂系统的造价，易于总装及维修。
The utility model has the advantages of simple structure, and easy assembly and maintenance, and moreover, the cost of a truck frame and a suspension system can be lowered.
本装置结构简单，可大大降低车架及悬挂系统的造价，易于总装及维修。
应用推荐