The tribological behaviours of metal matrix composites were reviewed.
对金属基复合材料的摩擦学进行了评述。
Its tribological properties in rapeseed oil were tested on the four balls tester.
通过四球试验机考察了它们在菜籽油基础油中的抗磨性能与极压性能。
The tribological problem was discussed for the mould design by invalidation analysis of mould.
通过模具的失效分析,讨论了模具设计中的摩擦学问题。
The experimental results show that IF-3 dry lubricating film has good tribological characteristics.
评价结果表明,该干膜具有良好的摩擦学特性。
The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
The hardness of anodic oxidation layer is higher, the tribological property of composite coating is better.
阳极氧化层的硬度越大,复合膜摩擦学性能越好。
In addition, the tribological properties of nanocrystalline Pb powders were tested with a four-ball machine.
另外,在四球试验机上考察了铅纳米晶的摩擦学性能。
The discussion was made on the characteristics of topography and its relationship with tribological properties.
具有孤岛型形貌特征的蠕铁摩擦学性能最好,具有犁沟型形貌的蠕铁摩擦学性能最差。
Knowledge acquisition method of tribological system condition identification using Bayesian network was proposed.
研究了基于贝叶斯网络的摩擦学系统状态辨识知识的获取方法。
The tribological properties and the anti-wear of micron coppers inside greases were investigated by four-ball test.
通过四球试验,考察了软金属微米铜粉在润滑脂中的摩擦学行为和抗磨性。
To facilitate exchange of views, comments and opinions on tribological matters between member societies and groups.
促进社团成员就摩擦学问题交换各自的意见、评价和观点。
The tribological properties and the anti-wear of micron coppers inside greases were investigated by four-ball test.
通过四球试验,考察了微米铜粉在润滑脂中的摩擦学行为和抗磨性。
Abstract: The tribological characteristics of cast iron under dry sliding condition was systematically investigated.
文摘:系统地研究了铸铁材料在干滑动摩擦条件下的摩擦学特性。
Several main factors that influences the tribological properties of UHMWPE in pin and disc experiment were analyzed.
分析了销盘试验中影响超高分子量聚乙烯(UHMWPE)摩擦学性能的主要因素。
The tribological properties and the anti-wear of micron copper powder in greases are investigated by four-ball test.
通过四球试验 ,考察了软金属微米铜粉在润滑脂中的摩擦学行为和抗磨性。
The tribological properties and the anti-wear of micron copper powder in greases are investigated by four-ball test.
通过四球试验,考察了微米铜粉在润滑脂中的摩擦学行为和抗磨性。
The effects of sintering temperature, holding time, and milling time on the tribological properties were also studied.
研究了烧结温度、保温时间和球磨时间对放电等离子烧结合金耐磨性能的影响。
The content, method and the problem to be solved of tribological calculation on large automobile panel were researched.
探讨了大型覆盖件摩擦学计算的内容和方法以及摩擦学计算应解决的问题。
It is important to understand the tribological characteristics of rare earth materials and the role of rare earth element.
了解和掌握含稀土材料的摩擦学特性及稀土元素在其中的作用机制具有重要的意义。
The tribological experiments showed that the Mo layer possessed a good wear-resistance and an excellent anti-scuffing property.
摩擦学实验表明,镀钼层具有良好的耐磨性和优异的抗擦伤能力。
This paper reviews recent advances in the artificial knee joint simulation test bench and the corresponding bio-tribological tests.
人工膝关节生物摩擦学模拟试验是在设计和制造阶段评价人工膝关节假体的主要方法。
The microstructure, mechanical properties and tribological behaviors of the steel treated by different heat treatments were studied.
研究了不同的热处理制度下该钢的显微组织、力学性能及磨损行为。
The tribological property of the composite coatings modified with nanometer ceramic particles and self lubrication nano-powders is overviewed.
对纳米陶瓷微粒及自润滑纳米粉改性的非晶纳米复合镀层的摩擦学性能进行了综述。
The tribological characteristics of Fluosopolymer alloy (F50-1) at high temperature were experimentally studied with a pin-disc-type apparatus.
在销盘式试验机上对氟塑料合金(F50 - 1)的高温摩擦学特性进行了试验研究。
The tribological test results showed the borate containing nitrogen had good antiwear, friction-reducing performance and load-carrying capacity.
摩擦学试验表明:含氮硼酸酯在水中具有良好的减摩抗磨性能和承载能力。
The composite material oil filled MC nylon with glass beads as the filler was prepared. The tribological and thermal properties were investigated.
以玻璃微珠为填料制备了玻璃微珠填充改性含油铸型尼龙复合材料,研究了复合材料的摩擦学性能和热性能。
However, P02 showed stable wear at high temperatures, which indicates PI could improve the tribological properties of composites at high-temperatures.
但在高温情况下,P02的磨损稳定性较好,说明PI对材料的高温性能有明显的改善作用。
However, P02 showed stable wear at high temperatures, which indicates PI could improve the tribological properties of composites at high-temperatures.
但在高温情况下,P02的磨损稳定性较好,说明PI对材料的高温性能有明显的改善作用。
应用推荐